Mock-up qualification and prototype manufacture for ITER current leads

被引：5

作者：

Zhou, Tingzhi ^{[1
]}

Lu, Kun ^{[1
]}

Ran, Qingxiang ^{[1
]}

Ding, Kaizhong ^{[1
]}

Feng, Hansheng ^{[1
]}

Wu, Huan ^{[1
]}

Liu, Chenglian ^{[1
]}

Song, Yuntao ^{[1
]}

Niu, Erwu ^{[2
]}

Bauer, Pierre ^{[3
]}

Devred, Arnaud ^{[3
]}

机构：

[1] Chinese Acad Sci, Inst Plasma Phys, Hefei, Peoples R China

[2] Minist Sci & Technol, CNDA, Beijing, Peoples R China

[3] ITER Org, Magnet Div, Cadarache, France

来源：

FUSION ENGINEERING AND DESIGN | 2015年 / 96-97卷

关键词：

Current lead; Heat exchanger; NbTi; Bi-2223; Prototype;

D O I：

10.1016/j.fusengdes.2015.04.050

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

Three types of high temperature superconducting current leads (HTSCL) are designed to carry 68 kA, 55 kA or 10 kA to the ITER magnets. Before the supply of the HTS current lead series, the design and manufacturing process is qualified through mock-ups and prototypes. Seven mock-ups, representing the critical technologies of the current leads, were built and tested successfully in the Institute of Plasma Physics of the Chinese Academy of Sciences (ASIPP) in 2013. After the qualification some design features of the HTS leads were updated. This paper summarizes the qualification through mock-ups. In 2014 ASIPP started the manufacture of the prototypes. The preparation and manufacturing process are also described. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：388 / 391

页数：4

共 50 条

[1] Manufacture and test of mock-up for ITER thermal shield
Noh, C. H.
Nam, K.
Chung, W.
Kang, D. K.
Kim, B. C.
Utin, Y.
Ioki, K.
Her, N. I.
Yu, J.
Ahn, H. J.
Bak, J. S.
Jung, K. J.
FUSION ENGINEERING AND DESIGN, 2010, 85 (10-12) : 1880 - 1884
[2] Manufacture of Nuclear Safety Valve Mock-Up and Qualification Requirements
Shi H.
Deng D.
Xiong D.
Lyu Y.
Zhao L.
Hedongli Gongcheng/Nuclear Power Engineering, 2018, 39 (01): : 88 - 92
[3] Mock-up testing facilities and qualification strategy for EU ITER TBMs
Aiello, A.
Buehler, L.
Ciampichetti, A.
Demange, D.
Doerr, L.
Freibergs, J. F.
Ghidersa, B.
Ilic, M.
Laffont, G.
Messemer, G.
Platnieks, I.
Rampal, G.
FUSION ENGINEERING AND DESIGN, 2010, 85 (10-12) : 2012 - 2021
[4] Development and manufacture of an ITER PF coil-tail mock-up
Dolgetta, N.
Bourquard, A.
Decool, P.
Moreschi, L.
Verger, J. M.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2006, 16 (02) : 852 - 855
[5] Manufacture and first wall joining for an ITER primary wall module prototype: results of a medium scale mock-up manufacturing
Febvre, M
Bobin-Vastra, I
Lorenzetto, P
Bouveret, Y
Cauvin, D
Raisson, G
Conchon, D
FUSION ENGINEERING AND DESIGN, 2001, 56-57 : 267 - 271
[6] A mock-up of a tritium pellet injector for ITER
Viniar, I
Saksaganskii, G
Skoblikov, S
Krasilnikov, I
Pimanikhin, S
FUSION ENGINEERING AND DESIGN, 2001, 58-59 : 313 - 317
[7] Neutronics study of ITER shielding mock-up
Markovskij, DV
Kovalchuk, VD
Mostovoy, VV
Tereshkin, VI
Nekhai, VG
PLASMA DEVICES AND OPERATIONS, 1998, 6 (1-3): : 229 - 238
[8] Experimental test campaign on an ITER divertor mock-up
Dell'Orco, G
Malavasi, A
Merola, M
Polazzi, G
Simoncini, M
Zito, D
FUSION ENGINEERING AND DESIGN, 2002, 61-62 : 147 - 151
[9] Mock-up of a support structure of the ITER vacuum vessel
Ahn, H. J.
Sa, J. W.
Kim, Y. K.
Hong, Y. S.
Choi, J. H.
Kwon, T. H.
Lee, J. S.
Park, K. H.
Kim, T. S.
Ha, W. I.
Choi, I. S.
Kim, B. C.
Hong, K. H.
Choi, C. H.
FUSION ENGINEERING AND DESIGN, 2009, 84 (2-6) : 375 - 379
[10] Development of the ITER IOIS assembly tool and mock-up
Nam, Kyoungo
Kim, Dongjin
Park, Hyunki
Ahn, Heejae
Kim, Kyoungkyu
Yoo, Yongsoo
Watson, Emma
Shaw, Robert
FUSION ENGINEERING AND DESIGN, 2014, 89 (9-10) : 2155 - 2158

← 1 2 3 4 5 →