Fabrication results of full scale mock-up for ITER W port in Korea

被引：7

作者：

Kim, H. S. ^{[1
]}

Park, C. K. ^{[1
]}

Kim, G. H. ^{[1
]}

Hong, K. H. ^{[1
]}

Lee, Y. J. ^{[1
]}

Kim, B. C. ^{[1
]}

Ahn, H. J. ^{[1
]}

Lee, H. G. ^{[1
]}

Kim, T. S. ^{[2
]}

Lee, J. S. ^{[2
]}

Won, J. G. ^{[2
]}

Sa, J. W. ^{[3
]}

Choi, C. H. ^{[3
]}

机构：

[1] Natl Fus Res Inst, ITER Korea, Taejon 305333, South Korea

[2] Hyundai Heavy Ind Co Ltd, Ulsan 682792, South Korea

[3] ITER Org, F-13115 St Paul Les Durance, France

来源：

FUSION ENGINEERING AND DESIGN | 2014年 / 89卷 / 7-8期

关键词：

ITER; Vacuum vessel; Port; Lower port stub extension; Mock-up;

D O I：

10.1016/j.fusengdes.2014.04.053

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

After a contract with Hyundai Heavy Industries Co. Ltd. (HHI) on January 2010 for the manufacture of the ITER equatorial and lower ports, manufacturing preparation activities have been performed. As part of the preparation activities, a full scale mock-up of the lower port stub extension (LPSE) #16 was fabricated by HHI in order to verify fabrication feasibility and set up the fabrication sequence for the LPSE. In this paper, major technical results from fabrication of a full scale mock-up will be presented with emphasis on the main manufacturing procedure, welding, nondestructive examination (NDE) and 3D dimensional inspection. Afterwards, progress of real product manufacturing is introduced. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：1779 / 1783

页数：5

共 50 条

[1] A proposal of ITER vacuum vessel fabrication specification and results of the full-scale partial mock-up test
Nakahira, M.
Takeda, N.
Kakudate, S.
Onozuka, M.
[J]. FUSION ENGINEERING AND DESIGN, 2008, 83 (10-12) : 1578 - 1582
[2] FABRICATION OF A 1/6-SCALE MOCK-UP FOR THE KOREA TBM FIRST WALL IN ITER
Yoon, Jae Sung
Kim, Suk Kwon
Lee, Eo Hwak
Cho, Seungyon
Lee, Dong Won
[J]. FUSION SCIENCE AND TECHNOLOGY, 2012, 62 (01) : 29 - 33
[3] Development of a full scale ECRH mm-wave launching system mock-up for ITER
Elzendoorn, BSQ
van Asselen, MPA
Bongers, WA
Genuit, JW
Graswinckel, MF
Heidinger, R
Kruijt, OG
Lamers, B
Piosczyk, B
Plomp, TC
Ronden, DMS
Verhoeven, AGA
[J]. FUSION ENGINEERING AND DESIGN, 2005, 74 (1-4) : 449 - 454
[4] Fabrication of full-size mock-up for 10° section of ITER vacuum vessel thermal shield
Kang, Dong Kwon
Nam, Kwanwoo
Kang, Kyoung-O
Noh, Chang Hyun
Chung, Wooho
Lim, Kisuk
Kang, Youngkil
Hamlyn-Harris, Craig
Her, Namil
Robby, Hicks, III
[J]. FUSION ENGINEERING AND DESIGN, 2015, 98-99 : 1566 - 1570
[5] Fabrication of a full-size mock-up for inboard 10° section of ITER vacuum vessel thermal shield
Chung, W.
Nam, K.
Noh, C. H.
Kang, D. K.
Kang, S. M.
Oh, Y. G.
Choi, S. W.
Kang, S. H.
Utin, Y.
Ioki, K.
Her, N.
Yu, J.
[J]. FUSION ENGINEERING AND DESIGN, 2011, 86 (9-11) : 1928 - 1932
[6] Fabrication of an ITER middle-scaled shielding blanket module mock-up
Sato, Shinichi
Osaki, Toshio
Yamada, Hirokazu
Kobayashi, Takeshi
Sato, Satoshi
Furuya, Kazuyuki
Hatano, Toshihisa
Tokami, Ikuhide
Kuroda, Toshimasa
Takatsu, Hideyuki
[J]. Fusion Engineering and Design, 1998, 39-40 (Pt A): : 765 - 773
[7] Fabrication of an ITER middle-scaled shielding blanket module mock-up
Sato, S
Osaki, T
Yamada, H
Kobayashi, T
Sato, S
Furuya, K
Hatano, T
Tokami, I
Kuroda, T
Takatsu, H
[J]. FUSION ENGINEERING AND DESIGN, 1998, 39-40 : 765 - 773
[8] A mock-up of a tritium pellet injector for ITER
Viniar, I
Saksaganskii, G
Skoblikov, S
Krasilnikov, I
Pimanikhin, S
[J]. FUSION ENGINEERING AND DESIGN, 2001, 58-59 : 313 - 317
[9] Neutronics study of ITER shielding mock-up
Markovskij, DV
Kovalchuk, VD
Mostovoy, VV
Tereshkin, VI
Nekhai, VG
[J]. PLASMA DEVICES AND OPERATIONS, 1998, 6 (1-3): : 229 - 238
[10] Development of the ITER upper port stub extension assembly tool and its mock-up
Nam, Kyoungo
Park, Hyunki
Kim, Dongjin
Bae, Jinho
Ahn, Heejae
Kim, Kyoungkyu
Yoo, Yongsoo
Watson, Emma
[J]. FUSION ENGINEERING AND DESIGN, 2015, 98-99 : 1571 - 1575

← 1 2 3 4 5 →