TRANSFORMATION KINETICS AND FERRITE-PEARLITE RATIOS IN A 65-45-12 DUCTILE IRON

被引:5
|
作者
Samuel, C. [1 ]
Viswanathan, S. [1 ]
机构
[1] Univ Alabama, Dept Met & Mat Engn, Tuscaloosa, AL 35487 USA
关键词
dilatometry; transformation kinetics; ductile iron; pearlite; ferrite; austenite;
D O I
10.1007/BF03355436
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Dilatometry has been extensively used to study the transformation behavior of steels. This paper outlines the use of Gleeble dilatometry to characterize the transformation kinetics and ferrite-pearlite ratios it? a 65-45-12 ductile iron. Samples were heated to 900(sic)C (1650(sic)F) and cooled at constant cooling rates ranging from 2 to 2000(sic)C/min (3.6 to 3600(sic)F/min). The dilatometer results were analyzed and transformation temperatures and the ferrite-pearlite ratio in the final microstructure were determined. The information was also used to estimate the continuous-cooling-transformation (CCT) curve for 65-45-12 ductile iron. The agreement between the ferrite-pearlite ratio predicted from the dilatometry results and metallographic analysis of dilatometry specimens was excellent.
引用
收藏
页码:55 / +
页数:10
相关论文
共 50 条
  • [41] In Situ Study of the Influence of Nickel on the Phase Transformation Kinetics in Austempered Ductile Iron
    Patrick Saal
    Leopold Meier
    Xiaohu Li
    Michael Hofmann
    Markus Hoelzel
    Julia N. Wagner
    Wolfram Volk
    Metallurgical and Materials Transactions A, 2016, 47 : 661 - 671
  • [42] In Situ Study of the Influence of Nickel on the Phase Transformation Kinetics in Austempered Ductile Iron
    Saal, Patrick
    Meier, Leopold
    Li, Xiaohu
    Hofmann, Michael
    Hoelzel, Markus
    Wagner, Julia N.
    Volk, Wolfram
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (02): : 661 - 671
  • [43] Role of Austenitization Temperature on Structure Homogeneity and Transformation Kinetics in Austempered Ductile Iron
    Gorny, M.
    Angella, G.
    Tyrala, E.
    Kawalec, M.
    Paz, S.
    Kmita, A.
    METALS AND MATERIALS INTERNATIONAL, 2019, 25 (04) : 956 - 965
  • [44] Role of Austenitization Temperature on Structure Homogeneity and Transformation Kinetics in Austempered Ductile Iron
    M. Górny
    G. Angella
    E. Tyrała
    M. Kawalec
    S. Paź
    A. Kmita
    Metals and Materials International, 2019, 25 : 956 - 965
  • [45] Influence of chemical composition and holding time on austenite (γ) → ferrite (α) transformation in ductile iron occurring within the intercritical interval
    Basso, A.
    Martinez, R.
    Sikora, J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (41) : 9884 - 9889
  • [46] Reflection of the Kinetics of Bainitic Transformtion of Ductile Cast Iron in Time-temperature Transformation Charts.
    Solncew, L.
    Pawljucenko, A.A.
    Giessereitechnik, 1981, 27 (03): : 73 - 75
  • [47] Effect of the section size, holding temperature and time on the kinetics of the ausferritic transformation and mechanical properties of as-cast ausferritic ductile iron
    de la Torre, Urko
    Gonzalez-Martinez, Rodolfo
    Mendez, Susana
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 788
  • [48] AN APPLICATION OF THE AVRAMI-EQUATION TO PREDICTING THE CONTINUOUS-COOLING AUSTENITE-]FERRITE+PEARLITE TRANSFORMATION KINETICS IN A 0.25-PERCENT-C PLAIN-CARBON STEEL
    CHAU, B
    HAWBOLT, EB
    BRIMACOMBE, JK
    CIM BULLETIN, 1984, 77 (866): : 56 - 56
  • [49] THE STUDY OF KINETICS OF TRANSFORMATION DURING THE AGING OF AUSTEMPERED DUCTILE IRON (ADI) BETWEEN 360-DEGREES-C AND 420-DEGREES-C
    LIU, YC
    SCHISSLER, JM
    MUNTEANU, A
    REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1994, 91 (05): : 815 - 826