Physical, Mechanical and Electrical Properties of W-20 wt.% Cu Composite Produced by Liquid Phase Sintering Process

被引：0

作者：

Ismail, Fauzi ^{[1
]}

Selamat, Mohd Asri ^{[1
]}

Muhamad, Norhamidi ^{[2
]}

Sulong, Abu Bakar ^{[2
]}

Majid, Nurzirah Abdul ^{[1
]}

机构：

[1] SIRIM Berhad, Adv Mat Res Ctr AMREC, Struct Mat Program, Lot 34,Jalan Hitech 2-3,Kulim Hitech Pk, Kulim 09000, Kedah, Malaysia

[2] Univ Kebangsaan Malaysia, Dept Mech & Mat Engn, Bangi 43600, Selangor, Malaysia

来源：

ADVANCED MATERIALS CONFERENCE (AMC 2012) | 2014年 / 879卷

关键词：

compaction; liquid phase sintering; microstructure; porosity; densification;

D O I：

10.4028/www.scientific.net/AMR.879.21

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, the effect of sintering temperature on the properties of tungsten-copper (W-Cu) composite produced by liquid phase sintering (LPS) process has been investigated. W-20 wt.% Cu composite powders with particle size less than 1 mu m was prepared by cold compaction and followed by cold isostatic pressing. The green specimens were then sintered under nitrogen based atmosphere in the temperature range of 1100 degrees C to 1300 degrees C. The sintering studies were conducted to determine the extent of densification and corresponding to microstructure changes. In addition, the properties of the sintered specimens such as physical appearance, microstructure evolution, mechanical and electrical properties were presented and discussed.

引用

页码：21 / +

页数：3

共 50 条

[21] Densification, Microstructure and Mechanical Properties of Al-4.5 wt.% Cu Alloy Powder Sintered Through Spark Plasma Sintering Process
Devaraj, S.
Mohan, H. K. Chandra
Swamy, K. S. Narayana
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2023, 12 (05) : 779 - 787
[22] Activated sintering and thermal properties of 1 wt. %Ag-W/Cu thermal-management composites
Luo, Guoqiang
Li, Yuan
Zhang, Jian
Dai, Yang
Shen, Qiang
Zhang, Lianmeng
2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2016, : 1155 - 1158
[23] Preparation by mechanical alloying, characterization and sintering of Cu-20 wt.% Al2O3 nanocomposites
Zawrah, M. F.
Zayed, Hamdia A.
Essawy, Raghieba A.
Nassar, Amira H.
Taha, Mohammed A.
MATERIALS & DESIGN, 2013, 46 : 485 - 490
[24] W-2 wt.%Y2O3 composite: Microstructure and mechanical properties
Battabyal, M.
Schaeublin, R.
Spaetig, P.
Baluc, N.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 538 : 53 - 57
[25] Microstructure and mechanical properties of a W-2wt.%Y2O3 composite produced by sintering and hot forging
Battabyal, M.
Schaeublin, R.
Spaetig, P.
Walter, M.
Rieth, M.
Baluc, N.
JOURNAL OF NUCLEAR MATERIALS, 2013, 442 (1-3) : S225 - S228
[26] Effect of Zr additions on the microstructure, and the mechanical and electrical properties of Cu-7 wt.%Ag alloys
Gaganov, A.
Freudenberger, J.
Botcharova, E.
Schultz, L.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 437 (02): : 313 - 322
[27] Effect of spark plasma sintering temperature on structure and performance characteristics of Cu-20wt%W composite
Li, Xiuqing
Zhang, Minjie
Zhang, Guoshang
Wei, Shizhong
Xu, Liujie
Zhou, Yucheng
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 912
[28] The effect of sintering temperature on densification of nanoscale dispersed W-20-40%wt Cu composite powders
Ardestani, M.
Rezaie, H. R.
Arabi, H.
Razavizadeh, H.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (05): : 862 - 867
[29] Kinetic characteristics of liquid phase sintering of mechanically activated W-15wt%Cu powder
Li, Zhigang
Jia, Chengchang
He, Yuntao
Chen, Liliang
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2006, 13 (04): : 338 - 345
[30] Kinetic characteristics of liquid phase sintering of mechanically activated W-15wt%Cu powder
Zhigang Li
Journal of University of Science and Technology Beijing(English Edition), 2006, (04) : 338 - 345

← 1 2 3 4 5 →