An Investigation on Slab Milling Operation to Find Out Optimum Cutting Parameters

被引：1
|
作者：
Guha, Spandan [1 ]
Banerjee, Tapas [2 ]
Bandyopadhyay, Asish [2 ]
Das, Santanu [3 ]
机构：
[1] Sikkim Manipal Inst Technol, Dept Mech Engn, Majitar 737136, Sikkim, India
[2] Jadavpur Univ, Dept Mech Engn, Kolkata 700032, India
[3] Kalyani Govt Engn Coll, Dept Mech Engn, Kalyani 741235, W Bengal, India
来源：
CAD/CAM, ROBOTICS AND FACTORIES OF THE FUTURE | 2016年
关键词：
Slab milling; Low alloy steel; Taguchi method; Composite desirability; Optimisation; SURFACE-ROUGHNESS; TOOL VIBRATION; PERFORMANCE; FINISH; OPTIMIZATION; REDUCTION;
D O I：
10.1007/978-81-322-2740-3_33
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Milling is a widely used machining operation. For generating a flat wide surface, slab milling is usually employed in industry. In this experimental work, slab milling operation has been performed on low alloy steel to obtain appropriate cutting parameters in order to get low surface roughness, low vibration and high material removal rate. Taguchi method and composite desirability function of response surface methodology have been used to get required cutting parameters. It has been observed from Taguchi's methodology that surface roughness is affected mostly by variation of cutting velocity or speed; in case of material removal rate, effect of feed is quite high, and speed also has sufficient effect on it.
引用
收藏
页码：345 / 356
页数：12
相关论文
共 50 条
  • [1] ANALYTICAL PREDICTION OF CUTTING FORCES IN SLAB MILLING OPERATION
    HIROTA, A
    USUI, E
    [J]. BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1981, 15 (01): : 40 - 46
  • [2] An Investigation to Reduce the Cutting Force in CNC Slot Milling Operation by Forecasting Optimum Process Parameters and Develop Precise Mathematical Model for It
    Patel, L. S.
    Parekhb, V. P.
    Vagh, A. S.
    [J]. INTERNATIONAL JOURNAL OF ENGINEERING, 2024, 37 (03): : 556 - 566
  • [3] Intelligent selection of cutting parameters in milling operation
    Ko, K
    Langari, R
    [J]. INTELLIGENT MANUFACTURING SYSTEMS 1997 (IMS'97), 1997, : 205 - 210
  • [4] The influence of purr formation in milling on the optimum selection of cutting parameters
    Olvera, O
    Peligrad, I
    Barrow, G
    [J]. ADVANCED DESIGN AND MANUFACTURE IN THE GLOBAL MANUFACTURING ERA, VOL 2, 1997, : 597 - 604
  • [5] INVESTIGATION OF CUTTING PARAMETERS IN MILLING OF DIN 1.2379 AND SLEIPNER MATERIALS
    Girit, Oguz
    [J]. THERMAL SCIENCE, 2022, 26 (04): : 2963 - 2971
  • [6] SLAB MILLING WITHOUT CUTTING FORCE FLUCTUATION
    HORNUNG, A
    [J]. ACTA TECHNICA ACADEMIAE SCIENTIARUM HUNGARICAE, 1969, 64 (3-4): : 407 - &
  • [7] Cutting forces and vibration interactions in slab milling
    Estrems, Manuel
    Germa, Shemeles
    Sanchez, Horacio T.
    Franco, Patricio
    [J]. IMETI 2008: INTERNATIONAL MULTI-CONFERENCE ON ENGINEERING AND TECHNOLOGICAL INNOVATION, VOL I, PROCEEDINGS, 2008, : 24 - 28
  • [8] OPTIMUM CUTTING OUT OF METAL BLANKS
    ZAVELSKI.MG
    KOROBOV, VA
    [J]. RUSSIAN ENGINEERING JOURNAL-USSR, 1966, 46 (10): : 60 - &
  • [9] Cutting parameters for optimum surface roughness during end milling of carbon fiber reinforced composites
    Uysal, Alper
    [J]. MATERIALS TESTING, 2016, 58 (06) : 588 - 593
  • [10] Determination of Cutting Parameters in End Milling Operation based on the Optical Surface Roughness Measurement
    Taga, Ozer
    Kiral, Zeki
    Yaman, Kemal
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2016, 17 (05) : 579 - 589
12345