An Investigation on Slab Milling Operation to Find Out Optimum Cutting Parameters

被引：1
|
作者：
Guha, Spandan [1 ]
Banerjee, Tapas [2 ]
Bandyopadhyay, Asish [2 ]
Das, Santanu [3 ]
机构：
[1] Sikkim Manipal Inst Technol, Dept Mech Engn, Majitar 737136, Sikkim, India
[2] Jadavpur Univ, Dept Mech Engn, Kolkata 700032, India
[3] Kalyani Govt Engn Coll, Dept Mech Engn, Kalyani 741235, W Bengal, India
来源：
CAD/CAM, ROBOTICS AND FACTORIES OF THE FUTURE | 2016年
关键词：
Slab milling; Low alloy steel; Taguchi method; Composite desirability; Optimisation; SURFACE-ROUGHNESS; TOOL VIBRATION; PERFORMANCE; FINISH; OPTIMIZATION; REDUCTION;
D O I：
10.1007/978-81-322-2740-3_33
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Milling is a widely used machining operation. For generating a flat wide surface, slab milling is usually employed in industry. In this experimental work, slab milling operation has been performed on low alloy steel to obtain appropriate cutting parameters in order to get low surface roughness, low vibration and high material removal rate. Taguchi method and composite desirability function of response surface methodology have been used to get required cutting parameters. It has been observed from Taguchi's methodology that surface roughness is affected mostly by variation of cutting velocity or speed; in case of material removal rate, effect of feed is quite high, and speed also has sufficient effect on it.
引用
收藏
页码：345 / 356
页数：12
相关论文
共 50 条
  • [31] CUTTING FORCE COMPONENTS AND THEIR PARAMETERS DURING MILLING
    MULLER, M
    [J]. WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1984, 74 (02): : 73 - 76
  • [32] The Effect of Cutting Process Parameters on the Stability in Milling
    Hsiao, Te-Ching
    Huang, Shyh-Chour
    [J]. ADVANCES IN MATERIALS AND MATERIALS PROCESSING IV, PTS 1 AND 2, 2014, 887-888 : 1200 - 1204
  • [33] Effect of Machining Parameters on Cutting Performance of DSS 2205 and SDSS 2507 Materials During Milling Operation
    George, Pradeep
    Wins, K. Leo Dev
    Dhas, D. S. Ebenezer Jacob
    Beatrice, B. Anuja
    [J]. JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2022, 21 (04) : 711 - 726
  • [34] DETERMINATION OF OPTIMUM CUTTING SPEED IN TURNING OPERATION.
    Goyal, S.K.
    [J]. Journal of the Institution of Engineers (India): Mechanical Engineering Division, 1979, 60 (pt ME 1): : 15 - 16
  • [35] Cutting power modelling in milling based on cutting parameters and tool condition
    [J]. Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 1997, 31 (03): : 79 - 82
  • [36] EFFECT OF THE CUTTING PARAMETERS ON CUTTING FORCES IN HIGH SPEED FACE MILLING
    Cekic, Ahmet
    Begic-Hajdarevic, Derzija
    Kulenovic, Malik
    [J]. TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2013, 20 (05): : 775 - 780
  • [37] Relationship between cutting temperature and cutting parameters of micro-milling
    Zhou, Xuance
    Bai, Qingshun
    Yang, Kai
    Luo, Zhi
    [J]. World Academy of Science, Engineering and Technology, 2010, 46 : 568 - 571
  • [38] An investigation on the cutting force of milling Inconel 718
    Tsai, Jhy-Cherng
    Kuo, Chung-Yu
    Liu, Zing-Ping
    Hsiao, Kelvin Hsi-Hung
    [J]. SIXTH INTERNATIONAL MULTI-CONFERENCE ON ENGINEERING AND TECHNOLOGY INNOVATION 2017 (IMETI 2017), 2018, 169
  • [39] Parameters Optimum for the Face Milling Cutter to Cut the Acrylic
    Juan, Dai-Jia
    [J]. PROCEEDINGS OF THE 2018 IEEE INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING (IEEE ICAM), 2018, : 306 - 309
  • [40] Prediction of the cutting forces in milling operation based on multi-objective optimization of the time series analysis parameters
    Pour, Masoud
    Fallah, Mohsen
    [J]. MACHINING SCIENCE AND TECHNOLOGY, 2024,
12345