Microstructural evolution and mechanical properties of the AA2219/TiC nanocomposite manufactured by ultrasonic solidification

被引:45
|
作者
Yang, Yilong [1 ]
Liu, Zhilin [1 ,2 ]
Jiang, Ripeng [1 ]
Li, Ruiqing [1 ]
Li, Xiaoqian [1 ,2 ]
机构
[1] Cent South Univ, Light Alloy Res Inst, Changsha 410083, Hunan, Peoples R China
[2] Cent South Univ, Coll Mech & Elect Engn, State Key Lab High Performance Complex Mfg, Changsha 410083, Hunan, Peoples R China
基金
中国国家自然科学基金;
关键词
AA2219/TiC nanocomposite; Ultrasonic casting; Structure-property relationship; Strengthening mechanisms; Grain refinement; METAL-MATRIX COMPOSITES; GRAIN-REFINEMENT; PLASTIC RELAXATION; CAVITATION EROSION; TENSILE PROPERTIES; ALUMINUM-ALLOYS; BEHAVIOR; NANO; NUCLEATION; DISPERSION;
D O I
10.1016/j.jallcom.2019.151991
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The mechanical properties of metallic matrix composites can be tailored through the microstructural modification between metal matrix and reinforcing particles. In this work, the AA2219/TiC nano-composite containing 0, 0.5, 0.9, 1.3 and 1.7 wt.% TiC nanoparticles were individually manufactured using the ultrasound-assisted solidification technique. There existed an optimal addition level of TiC nanoparticles (0.9 wt.%) beyond which grain coarsening occurred. TiC nanoparticles were observed to reduce the average grain sizes of alpha-Al matrix alloy by 61%. Meanwhile, 0.9 wt.% TiC nanoparticles corresponded to the maximum tensile strength and hardness. When the addition level reached over 0.9 wt.% in the 2219 Al alloy matrix melt, the TiC nanoparticles tended to agglomerate in a form of condensed clusters, which cannot be well dispersed by ultrasonication due to the increasing viscosity. Such agglomerating TiC nanoparticles deteriorated the tensile strain and hardness of AA2219/TiC nanocomposite. Then, five major potential strengthening mechanisms in AA2219/TiC nanocomposite was quantitatively analysed, including grain refinement, Orowan strengthening, load transfer effect, mismatch of thermal expansion, and mismatch of elastic modulus. Analysis shows that Orowan strengthening acts as the most dominant strengthening mechanism, followed by another comparable strengthening mechanism from the mismatch between the thermal expansion of alpha-Al matrix and TiC nanoparticles. The other three strengthening mechanisms induced very limited improvement in mechanical properties. Besides acting as reinforcing agents, the TiC nanoparticles also possess very high potency as heterogeneous nucleation sites. The relevant nucleation potency was validated by crystallographic investigation using the edge-to-edge matching model. Finally, the grain refining mechanism of alpha-Al matrix alloy was unraveled in terms of the nucleation crystallography and the ultrasonic cavitation. (C) 2019 Elsevier B.V. All rights reserved.
引用
收藏
页数:12
相关论文
共 50 条
  • [41] Microstructural characterization and corrosion behavior of multipass friction stir processed AA2219 aluminium alloy
    Surekha, K.
    Murty, B. S.
    Rao, K. Prasad
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (17): : 4057 - 4068
  • [42] Effect of Quench Delay on Low-Temperature Mechanical Properties of Aluminium Alloy AA2219 Hand Forgings
    Arumugam, M.
    Narayanan, P. Ramesh
    Muthupandi, V.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (06) : 1475 - 1479
  • [43] Effect of Grain Size on the Mechanical Properties of Aluminum Alloy AA2219 Parent and Weldments at Ambient and Cryogenic Temperature
    Sushant K. Manwatkar
    M. Sunil
    Antony Prabhu
    S. V. S. Narayana Murty
    Reji Joseph
    P. Ramesh Narayanan
    Transactions of the Indian Institute of Metals, 2019, 72 : 1515 - 1519
  • [44] Pre-deformation effect on stress-relaxation ageing behavior and mechanical properties of AA2219 alloy
    Yang, Youliang
    Zhan, Lihua
    Liu, Chunhui
    International Journal of Lightweight Materials and Manufacture, 2020, 3 (01): : 73 - 76
  • [45] The effect of microstructure on corrosion behaviour and mechanical properties of friction stir welds of AA2519 and AA2219 Al-alloys
    Prasad, G. Siva
    Rao, K. Srinivasa
    Reddy, G. Madhusudhan
    MATERIALS TODAY COMMUNICATIONS, 2022, 33
  • [46] Microstructure and mechanical properties of Sc modified Al-Cu alloy (AA2219) electron beam welds
    Seshagiri, P. C.
    Reddy, G. Madhusudan
    Rao, K. Srinivasa
    Raju, M. Govinda
    Bhattacharya, S. S.
    Rao, K. Prasad
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2008, 13 (05) : 415 - 421
  • [47] Effect of Quench Delay on Low-Temperature Mechanical Properties of Aluminium Alloy AA2219 Hand Forgings
    M. Arumugam
    P. Ramesh Narayanan
    V. Muthupandi
    Transactions of the Indian Institute of Metals, 2019, 72 : 1475 - 1479
  • [48] The Influence of Process Parameters on the Mechanical Properties of Friction Stir-Welded Dissimilar Aluminium Alloys AA2219 and AA7068
    Refaai, Mohamad Reda A.
    Reddy, R. Meenakshi
    Radha, A.
    Christopher, David
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [49] Effect of Grain Size on the Mechanical Properties of Aluminum Alloy AA2219 Parent and Weldments at Ambient and Cryogenic Temperature
    Manwatkar, Sushant K.
    Sunil, M.
    Prabhu, Antony
    Murty, S. V. S. Narayana
    Joseph, Reji
    Narayanan, P. Ramesh
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (06) : 1515 - 1519
  • [50] Effect of pre-deformation on Creep age forming of AA2219 plate: Springback, microstructures and mechanical properties
    Yang, Youliang
    Zhan, Lihua
    Ma, Qiangqiang
    Feng, Jingwen
    Li, Xianmeng
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 229 : 697 - 702