Hydration properties of steel slag under different curing temperatures

被引：4
|
作者：
Zhang Bo [1 ]
Hu Jin [1 ]
Li Mengyuan [1 ]
机构：
[1] Tsinghua Univ, Dept Civil Engn, Beijing 100084, Peoples R China
来源：
SUSTAINABLE DEVELOPMENT OF URBAN AND RURAL AREAS | 2014年 / 507卷
关键词：
steel slag; non-evaporable water content; compressive strength; curing temperature; MECHANICAL-PROPERTIES; DURABILITY; CONCRETE;
D O I：
10.4028/www.scientific.net/AMM.507.295
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The non-evaporable water content, compressive strength, and pore distribution of steel slag paste cured under different curing temperature conditions were investigated in this paper. The non-evaporable water content of steel slag paste at early ages is obviously larger at higher curing temperature. At the age of 28 days, the non-evaporable water content of steel slag paste at normal curing temperature is close to that at high curing temperature, but the compressive strength of steel slag paste at normal curing temperature is much lower than that at high curing temperature. The pore structure of steel slag paste is much coarser than that of cement paste under the same conditions.
引用
收藏
页码：295 / 299
页数：5
相关论文
共 50 条
  • [31] Hydration heat of slag or fly ash in the composite binder at different temperatures
    Han, Fanghui
    He, Xuejiang
    Zhang, Zengqi
    Liu, Juanhong
    [J]. THERMOCHIMICA ACTA, 2017, 655 : 202 - 210
  • [32] Hydration mechanisms of composite binders containing copper slag at different temperatures
    Jin Liu
    Runhua Guo
    Pengcheng Shi
    Lei Huang
    [J]. Journal of Thermal Analysis and Calorimetry, 2019, 137 : 1919 - 1928
  • [33] Hydration mechanisms of composite binders containing copper slag at different temperatures
    Liu, Jin
    Guo, Runhua
    Shi, Pengcheng
    Huang, Lei
    [J]. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2019, 137 (06) : 1919 - 1928
  • [34] Hydration mechanisms of composite binders containing phosphorus slag at different temperatures
    Zhang, Zengqi
    Wang, Qiang
    Yang, Jun
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2017, 147 : 720 - 732
  • [35] Effect of direct electric curing on the mechanical properties, hydration process, and environmental benefits of cement-steel slag composite
    Wang, Jilin
    Ren, Xin
    Cai, Yuxin
    Xiang, Yu
    Umar, Hussaini Abdullahi
    Li, Yingjie
    Xiao, Qiyuan
    Long, Guangcheng
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2023, 406
  • [36] Alkali-Activated Phosphorous Slag Performance under Different Curing Conditions: Compressive Strength, Hydration Products, and Microstructure
    Maghsoodloorad, Hojjatollah
    Khalili, Hamidreza
    Allahverdi, Ali
    [J]. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2018, 30 (01)
  • [37] The influence of slag properties, mix parameters and curing temperature on hydration and strength development of slag/cement blends
    Bougara, Abdelkader
    Lynsdale, Cyril
    Milestone, Neil B.
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2018, 187 : 339 - 347
  • [38] Sulfate resistance of steel slag blended/GGBFS blended cement mortars under different curing conditions
    Li, Baoliang
    Huo, Binbin
    You, Nanqiao
    Zhu, Guorui
    Chen, Chun
    Zhang, Yamei
    [J]. Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition), 2019, 49 (06): : 1144 - 1152
  • [39] Curing of slag concretes at low temperatures: effect on selected durability properties
    Otieno, Mike
    Opeka, Riccardo
    [J]. MRS ADVANCES, 2020, 5 (25) : 1267 - 1275
  • [40] Early Hydration and Setting Process of Fly Ash-blended Cement Paste under Different Curing Temperatures
    Zhang, Wenhua
    Wu, Fan
    Zhang, Yunsheng
    [J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2020, 35 (03): : 551 - 560
12345