Low temperature spark plasma sintering of Al2O3-TiC composites

被引：19
|
作者：
Meir, S. [1 ]
Kalabukhov, S. [1 ]
Hayun, S. [1 ]
机构：
[1] Ben Gurion Univ Negev, Dept Mat Engn, IL-84105 Beer Sheva, Israel
来源：
CERAMICS INTERNATIONAL | 2014年 / 40卷 / 08期
关键词：
Aluminum oxide; Ceramic composite; Spark plasma sintering (SPS); Titanium carbide; MECHANICAL-PROPERTIES; MICROSTRUCTURE; TOOLS;
D O I：
10.1016/j.ceramint.2014.04.059
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Al2O3-TiC composites were fabricated using spark plasma sintering (SPS) technology between 1300 degrees C and 1500 degrees C. The composite densification process starts at 950 degrees C, with a maximum densification rate at 1170 degrees C. After thirty minutes soaking at 1400 degrees C, a relative density of 99.5% was achieved. Microstructure analysis reveals a submicron Al2O3 grain size and homogenous distribution of titanium carbide in the matrix. The fully dense Al2O3-20 wt% TiC composite exhibits high values of fracture toughness (8.3 MPa m(1/2)), Young's modulus (406 GPa), flexural strength (850 MPa) and hardness (21 GPa). (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码：12187 / 12192
页数：6
相关论文
共 50 条
  • [41] Mechanochemically synthesized Al2O3-TiC nanocomposite
    Sharifi, E. Mohammad
    Karimzadeh, F.
    Enayati, M. H.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 491 (1-2) : 411 - 415
  • [42] Laser micromachining of Al2O3-TiC ceramics
    Oliveira, V
    Vilar, R
    Conde, O
    Freitas, P
    JOURNAL OF MATERIALS RESEARCH, 1997, 12 (12) : 3206 - 3209
  • [43] Preparation and reparation and mechanical properties of nanocobalt coated Al2O3-TIC composites
    Yin, Yansheng
    Chen, Shougang
    Chang, Xueting
    Lau, Kin-tak
    ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2, 2007, 334-335 : 913 - +
  • [44] Photo- and cathodoluminescence of combustion-synthesized Al2O3-TiC composites
    Xia, TD
    Wang, TM
    Ma, BY
    Liu, TZ
    Zhao, WJ
    PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1999, 174 (01): : 291 - 299
  • [45] Densification and microstructure of Al2O3-cBN composites prepared by spark plasma sintering
    Hotta, Mikinori
    Goto, Takashi
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2008, 116 (1354) : 744 - 748
  • [46] Production of Al2O3-SiC nano-composites by spark plasma sintering
    Razavi, Mansour
    Farajipour, Ali Reza
    Zakeri, Mohammad
    Rahimipour, Mohammad Reza
    Firouzbakht, Ali Reza
    BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2017, 56 (04): : 186 - 194
  • [47] Mechanical properties of Al2O3\Ti composites fabricated by spark plasma sintering
    Meir, S.
    Kalabukhov, S.
    Frage, N.
    Hayun, S.
    CERAMICS INTERNATIONAL, 2015, 41 (03) : 4637 - 4643
  • [48] Mechanism and Properties of Ti/Al2O3 Composites by Spark Plasma Sintering Technique
    Wang Zhi
    Shi Guopu
    Zhao Jun
    Xing Guohong
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 : 450 - 453
  • [49] Synthesis and characterization of Al2O3-TiC-ZrO2 ceramics with intragranular nanostructure by spark plasma sintering
    Wang, Zhiyong
    Yi, Mingdong
    Zheng, Kai
    Chen, Zhaoqiang
    Xiao, Guangchun
    Xu, Chonghai
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2023, 20 (04) : 2281 - 2288
  • [50] Mechanical and Friction Properties of Al2O3-ZrO2-TiC Composite with Varying TiC Contents Fabricated by Spark Plasma Sintering
    Zhu, Yabin
    Chai, Jianlong
    Shen, Tielong
    Wang, Zhiguang
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2021, 52 (02): : 767 - 775
12345