Low temperature spark plasma sintering of Al2O3-TiC composites

被引：19

作者：

Meir, S. ^{[1
]}

Kalabukhov, S. ^{[1
]}

Hayun, S. ^{[1
]}

机构：

[1] Ben Gurion Univ Negev, Dept Mat Engn, IL-84105 Beer Sheva, Israel

来源：

CERAMICS INTERNATIONAL | 2014年 / 40卷 / 08期

关键词：

Aluminum oxide; Ceramic composite; Spark plasma sintering (SPS); Titanium carbide; MECHANICAL-PROPERTIES; MICROSTRUCTURE; TOOLS;

D O I：

10.1016/j.ceramint.2014.04.059

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Al2O3-TiC composites were fabricated using spark plasma sintering (SPS) technology between 1300 degrees C and 1500 degrees C. The composite densification process starts at 950 degrees C, with a maximum densification rate at 1170 degrees C. After thirty minutes soaking at 1400 degrees C, a relative density of 99.5% was achieved. Microstructure analysis reveals a submicron Al2O3 grain size and homogenous distribution of titanium carbide in the matrix. The fully dense Al2O3-20 wt% TiC composite exhibits high values of fracture toughness (8.3 MPa m(1/2)), Young's modulus (406 GPa), flexural strength (850 MPa) and hardness (21 GPa). (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：12187 / 12192

页数：6

共 50 条

[31] Spark plasma sintering of TiC-ZrC composites
Li, Ying
Katsui, Hirokazu
Goto, Takashi
CERAMICS INTERNATIONAL, 2015, 41 (05) : 7103 - 7108
[32] Fabrication of TiB2/TiC Composites by Spark Plasma Sintering
Ma Zhi-Qiang
Ji Ying-Hu
Wang Lian-Jun
JOURNAL OF INORGANIC MATERIALS, 2012, 27 (09) : 961 - 964
[33] Influence of TiC particle size on the load-independent hardness of Al2O3-TiC composites
Wan, Y
Gong, JH
MATERIALS LETTERS, 2003, 57 (22-23) : 3439 - 3443
[34] Spark plasma sintering of Nb/Ti3Al(Si)C2-TiC laminated composites
Kashkarov, E. B.
Krotkevich, D. G.
Abdulmenova, A. V.
Ivashutenko, A. S.
Perevislov, S. N.
Lider, A. M.
Travitzky, N.
MATERIALIA, 2023, 27
[35] Synthesis of Al2O3-TiC by reactive milling
Pallone, EMJA
Tomasi, R
Botta, WJ
METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, PTS 1 AND 2, 2000, 343-3 : 393 - 398
[36] Excimer laser machining of Al2O3-TiC
Oliveira, V
Vilar, R
Conde, O
ICALEO'96 - PROCEEDINGS OF THE LASER MATERIALS PROCESSING CONFERENCE, 1996, 81 : E99 - E104
[37] PREPARATION AND MICROSTRUCTURE OF AL2O3-TIC COMPOSITES BY SELF-PROPAGATED HIGH-TEMPERATURE SYNTHESIS
CHRYSANTHOU, A
SAIDI, A
AYLOTT, CEW
WOOD, JV
JOURNAL OF ALLOYS AND COMPOUNDS, 1994, 203 (1-2) : 127 - 132
[38] UV pulsed laser deposition from Al2O3-TiC ceramic composites
Conde, O
Champeaux, C
Paramês, ML
Catherinot, A
Vilar, R
APPLIED SURFACE SCIENCE, 2003, 208 : 522 - 526
[39] TiB2 composites fabricated by spark plasma sintering at low temperature
Liu, Luo-Jin
Zhang, Zhao-Hui
Jia, Xiao-Tong
Wang, Qiang
Xu, Tian-Hao
Hu, Jia-Zhao
Cheng, Xing-Wang
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2024, 132 (03) : 121 - 127
[40] Pressureless sintering of Al2O3-TiC powders produced from carbon coated precursors
Kaga, H
Newman, KB
Koc, R
ADVANCES IN CERAMIC MATRIX COMPOSITES VIII, 2002, 139 : 51 - 56

← 1 2 3 4 5 →