Drilling Process on CFRP: Multi-Criteria Decision-Making with Entropy Weight Using Grey-TOPSIS Method

被引:17
|
作者
Tran, Quang-Phuoc [1 ]
Nguyen, Van-Nhat [2 ]
Huang, Shyh-Chour [1 ]
机构
[1] Natl Kaohsiung Univ Appl Sci, Dept Mech Engn, Kaohsiung 80778, Taiwan
[2] Hung Yen Univ Technol & Educ, Fac Mech Engn, Hung Yen 160000, Vietnam
来源
APPLIED SCIENCES-BASEL | 2020年 / 10卷 / 20期
关键词
CFRP; uncut fiber; delamination; entropy weight; TOPSIS; PROCESS PARAMETERS; MULTIOBJECTIVE OPTIMIZATION; MACHINING PARAMETERS; SELECTION; COMPOSITE; DELAMINATION; ALGORITHM; CRITERIA; COOLANT;
D O I
10.3390/app10207207
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Moisture strongly affects the quality and mechanical specificity of carbon fiber reinforced plastic (CFRP) when using lubrication fluids during machining, and the significant impact of the cutting tool geometry and cryogenic gas cooling on CFRP machining capabilities are observed. The main body of this paper aims at making decisions about the optimum parameter of the drilling process while machining on CFRP base on the grey relational coefficient embed to the technique for order of preference by similarity to an ideal solution (Grey-TOPSIS). The entropy method was used to determine the weight of decision-making for handling a multiple measure decision-making response. The twist angle of the tool drill, lubrication, and feed rate were used as the input variables, and were analyzed while taking into account several multi-response outputs, such as the surface roughness, uncut fiber, and delamination. The result showed that a feed rate of 228 mm/min, the high-helix twist angle, and cryogenic CO2 lubrication leads the calculated value to close the relative value, which minimizes the value of the surface roughness, the uncut fiber, and the delamination. Finally, verification of the valid effect of each parameter process was conducted using analysis of variance. The results indicated that the lubrication was the highest remarkable criterion on the uncut fiber, the delamination, and the surface roughness. By integrating the advantage of grey systems theory, and the technique for order preference by similarity to an ideal solution, to evaluate and optimize the machining parameter, the results indicate that the proposed model is useful to facilitate the multi-criteria decision-making problem under the environment of uncertainty and vagueness. This relatively advanced approach is very effectual in rejecting process variation and a great assistive strategy than other multi-criteria decision-making approaches.
引用
收藏
页码:1 / 18
页数:18
相关论文
共 50 条
  • [1] Grey stochastic multi-criteria decision-making based on regret theory and TOPSIS
    Zhou, Huan
    Wang, Jian-qiang
    Zhang, Hong-yu
    INTERNATIONAL JOURNAL OF MACHINE LEARNING AND CYBERNETICS, 2017, 8 (02) : 651 - 664
  • [2] Grey stochastic multi-criteria decision-making based on regret theory and TOPSIS
    Huan Zhou
    Jian-qiang Wang
    Hong-yu Zhang
    International Journal of Machine Learning and Cybernetics, 2017, 8 : 651 - 664
  • [3] Multi-criteria decision-making process for buildings
    Barcomb, JD
    Curtner, A
    35TH INTERSOCIETY ENERGY CONVERSION ENGINEERING CONFERENCE & EXHIBIT (IECEC), VOLS 1 AND 2, TECHNICAL PAPERS, 2000, : 528 - 535
  • [4] The stratified multi-criteria decision-making method
    Asadabadi, Mehdi Rajabi
    KNOWLEDGE-BASED SYSTEMS, 2018, 162 : 115 - 123
  • [5] Neutrosophic-simplified-TOPSIS Multi-Criteria Decision-Making using combined Simplified-TOPSIS method and Neutrosophics
    Elhassouny, Azeddine
    Smarandache, Florentin
    2016 IEEE INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS (FUZZ-IEEE), 2016, : 2468 - 2474
  • [6] A Novel Method for Clustering in WSNs via TOPSIS Multi-criteria Decision-Making Algorithm
    Ahmad Shelebaf
    Shayesteh Tabatabaei
    Wireless Personal Communications, 2020, 112 : 985 - 1001
  • [7] Assessment of TEOG Examination Success: Topsis Multi-Criteria Decision-Making Method Practice
    Kazan, Halim
    Karaman, Engin
    Akcali, Burcay Yasar
    Sismanoglu, Elcin
    WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP, 2015, : 915 - 924
  • [8] A Novel Method for Clustering in WSNs via TOPSIS Multi-criteria Decision-Making Algorithm
    Shelebaf, Ahmad
    Tabatabaei, Shayesteh
    WIRELESS PERSONAL COMMUNICATIONS, 2020, 112 (02) : 985 - 1001
  • [9] Catchment-wide wetland assessment and prioritization using the multi-criteria decision-making method TOPSIS
    Liu, CR
    Frazier, P
    Kumar, L
    MacGregor, C
    Blake, N
    ENVIRONMENTAL MANAGEMENT, 2006, 38 (02) : 316 - 326
  • [10] Characteristics of the Analytic Network Process, a Multi-Criteria Decision-Making Method
    Kadoic, Nikola
    CROATIAN OPERATIONAL RESEARCH REVIEW, 2018, 9 (02) : 235 - 244