A 2D μ-Raman analysis of low repetition rate femto-waveguides in lithium niobate by using a finite element model

被引：8

作者：

Tejerina, M. R. ^{[1
]}

Jaque, D. ^{[2
]}

Torchia, G. A. ^{[1
]}

机构：

[1] CONICET La Plata CIC, Ctr Invest Opt, RA-1897 Pcia Buenos Aires, Argentina

[2] Univ Autonoma Madrid, Fac Ciencias C4, Dept Fis Mat, E-28049 Madrid, Spain

来源：

OPTICAL MATERIALS | 2014年 / 36卷 / 05期

关键词：

Lithium niobate; Femtosecond laser written optical; waveguides; Raman shift mapping; Refractive index field; Residual strain field; LASER; STRAIN;

D O I：

10.1016/j.optmat.2013.12.040

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

We present a mu-Raman two-dimensional analysis of 1 kHz femtosecond laser written waveguides in an x-cut lithium niobate crystal. At first, the fitting between a two-dimensional elastic model and experimental micro Raman spectroscopy data (MR) were examined to validate the numerical model. In this, the Raman Potential Deformation Theory (RPDT) was employed to fit the wavenumber shift of the A(1)(TO)(4) phonon. Then, the adequate values for geometrical parameters of the numerical model (horizontal and vertical ellipse radius) were estimated. Finally, using these parameter values, the guided modes were computed for different ellipse expansions and compared with experimental guided modes. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：936 / 940

页数：5

共 50 条

[1] On the convergence of 2D and 3D finite element/boundary element analysis for periodic acoustic waveguides
Daniau, William
Lenczner, Michel
Laroche, Thierry
Garcia, Julien
Carry, Emile
Ballandras, Sylvain
2009 JOINT MEETING OF THE EUROPEAN FREQUENCY AND TIME FORUM AND THE IEEE INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM, VOLS 1 AND 2, 2009, : 430 - 434
[2] 2D Model Design and Finite Element Analysis on Wrench
Wei, Ye-Qing
Shi, Jie
Ruan, Jie-Qiong
Guo, Zhi-Qun
Li, Huan
International Conference on Mechanics, Building Material and Civil Engineering (MBMCE 2015), 2015, : 18 - 23
[3] High-repetition-rate femtosecond-laser inscription of low-loss thermally stable waveguides in lithium niobate
Piromjitpong, Teerawat
Dubov, Mykhaylo
Boscolo, Sonia
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2019, 125 (05):
[4] High-repetition-rate femtosecond-laser inscription of low-loss thermally stable waveguides in lithium niobate
Teerawat Piromjitpong
Mykhaylo Dubov
Sonia Boscolo
Applied Physics A, 2019, 125
[5] Analysis of the Propagation Properties of 900-bend Periodic Segmented Waveguides Using the 2D Finite Element Method
Rubio-Mercedes C.E.
Rodríguez-Esquerre V.F.
Lima I.T.
Hernández-Figueroa H.E.
Journal of Microwaves, Optoelectronics and Electromagnetic Applications, 2018, 17 (01): : 32 - 43
[6] GAIT ANALYSIS DRIVEN 2D FINITE ELEMENT MODEL OF THE NEUROPATHIC HINDFOOT
Guiotto, Annamaria
Scarton, Alessandra
Sawacha, Zimi
Guarneri, Gabriella
Avogaro, Angelo
Cobelli, Claudio
JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY, 2016, 16 (02)
[7] Modal Analysis of Stiffened Plates with Advanced 2D Finite Element Model
Alaimo, Andrea
Valvano, Stefano
INTERNATIONAL CONFERENCE ON NUMERICAL ANALYSIS AND APPLIED MATHEMATICS ICNAAM 2019, 2020, 2293
[8] Analysis of pollutant transport in the Han River with tidal current using a 2D finite element model
Lee, Myung Eun
Seo, Il Won
JOURNAL OF HYDRO-ENVIRONMENT RESEARCH, 2007, 1 (01) : 30 - 42
[9] Finite element analysis of 2D turbulent flows using the logarithmic form of the k-ε model
Hasebe, Hiroshi
Nomura, Takashi
WIND AND STRUCTURES, 2009, 12 (01) : 21 - 47
[10] Topographic Amplification Factors for Japan Using 2D Finite Element Analysis
Kim, Byungmin
Park, Kyoungsoo
Baek, Hyunil
GEOTECHNICAL EARTHQUAKE ENGINEERING AND SOIL DYNAMICS V: SEISMIC HAZARD ANALYSIS, EARTHQUAKE GROUND MOTIONS, AND REGIONAL-SCALE ASSESSMENT, 2018, (291): : 630 - 637

← 1 2 3 4 5 →