A 2D μ-Raman analysis of low repetition rate femto-waveguides in lithium niobate by using a finite element model

被引：8

作者：

Tejerina, M. R. ^{[1
]}

Jaque, D. ^{[2
]}

Torchia, G. A. ^{[1
]}

机构：

[1] CONICET La Plata CIC, Ctr Invest Opt, RA-1897 Pcia Buenos Aires, Argentina

[2] Univ Autonoma Madrid, Fac Ciencias C4, Dept Fis Mat, E-28049 Madrid, Spain

来源：

OPTICAL MATERIALS | 2014年 / 36卷 / 05期

关键词：

Lithium niobate; Femtosecond laser written optical; waveguides; Raman shift mapping; Refractive index field; Residual strain field; LASER; STRAIN;

D O I：

10.1016/j.optmat.2013.12.040

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

We present a mu-Raman two-dimensional analysis of 1 kHz femtosecond laser written waveguides in an x-cut lithium niobate crystal. At first, the fitting between a two-dimensional elastic model and experimental micro Raman spectroscopy data (MR) were examined to validate the numerical model. In this, the Raman Potential Deformation Theory (RPDT) was employed to fit the wavenumber shift of the A(1)(TO)(4) phonon. Then, the adequate values for geometrical parameters of the numerical model (horizontal and vertical ellipse radius) were estimated. Finally, using these parameter values, the guided modes were computed for different ellipse expansions and compared with experimental guided modes. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：936 / 940

页数：5

共 50 条

[31] Effect of conductivity uncertainties on EEG source localization using a 2D finite element model
Awada, KA
Baumann, SB
Jackson, DR
PROCEEDINGS OF THE 19TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY, VOL 19, PTS 1-6: MAGNIFICENT MILESTONES AND EMERGING OPPORTUNITIES IN MEDICAL ENGINEERING, 1997, 19 : 2124 - 2127
[32] In-silico simulation of nanoindentation on bone using a 2D cohesive finite element model
Xiao, Pengwei
Roy, Anuradha
Wang, Xiaodu
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2024, 151
[33] Application of 2D finite element model for nonlinear dynamic analysis of clamp band joint
Qin, Zhaoye
Cui, Delin
Yan, Shaoze
Chu, Fulei
JOURNAL OF VIBRATION AND CONTROL, 2017, 23 (09) : 1480 - 1494
[34] Analysis of HEMT Multilayered Structures using a 2D Finite Volume Model
Aminfar, AmirHossein
Grayeli, Elah Bozorg
Asheghi, Mehdi
Goodson, Kenneth E.
2012 13TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM), 2012, : 224 - 234
[35] Establishing size effects in discontinuous fibre composites using 2D finite element analysis
Qian, C.
Harper, L. T.
Turner, T. A.
Li, S.
Warrior, N. A.
COMPUTATIONAL MATERIALS SCIENCE, 2012, 64 : 106 - 111
[36] Upscaling 2D finite element analysis stress results using radial basis functions
Chiappa, Andrea
Salvini, Pietro
Brutti, Carlo
Biancolini, Marco Evangelos
COMPUTERS & STRUCTURES, 2019, 220 : 131 - 143
[37] A comparison of mesh termination schemes for 2D scattering analysis using the finite element method
Young, Andre
Davidson, David B.
2007 AFRICON, VOLS 1-3, 2007, : 430 - 434
[38] NOVEL SOLUTION OF 2-D WAVEGUIDES USING THE FINITE-ELEMENT METHOD
KATZ, J
APPLIED OPTICS, 1982, 21 (15): : 2747 - 2750
[39] 2D finite-element analysis of calcium distribution in oocytes
Naik P.A.
Pardasani K.R.
Network Modeling Analysis in Health Informatics and Bioinformatics, 2018, 7 (1)
[40] A symmetric finite element scheme with high-order absorbing boundary conditions for 2D waveguides
Rabinovich, Daniel
Givoli, Dan
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2025, 435

← 1 2 3 4 5 →