Study on the mechanical properties of flax fiber-reinforced silty clay contaminated by zinc-ion solution

被引:14
|
作者
Ma, Qiang [1 ]
Xiang, Jun-chen [1 ]
Yang, Yi-cong [1 ]
Xiao, Heng-lin [1 ]
Wan, Juan [1 ]
机构
[1] Hubei Univ Technol, Sch Civil Engn & Architecture, Wuhan 430068, Hubei, Peoples R China
基金
中国国家自然科学基金;
关键词
Zinc-contaminated soil; fiber reinforcement; shear strength; compression properties; mechanical property; HEAVY-METAL; ENGINEERING PROPERTIES; SWELLING BEHAVIOR; SHEAR-STRENGTH; PERMEABILITY; SOILS; COMPRESSIBILITY; COMPACTION;
D O I
10.1080/09593330.2019.1652697
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Mechanical properties of fiber-reinforced soil after soaking in heavy metal ion solution have great influences on safety and stability of the reinforcement, herein the mechanical properties of optimum moisture content of different concentrations of zinc ions contaminated soil were studied through shear test, compression test and triaxial test. The compressive modulus, compression coefficient and porosity ratio of different concentrations of the zinc-ion contaminated soil under different pressure were studied, and the variation characteristics of internal friction angle and cohesion were also investigated, thereafter, the causes of the change of cohesion and internal friction angle were analyzed from the microscopic perspective. The results show that the shear strength of contaminated reinforced soil increases with the increase of confining pressure at the same zinc ions concentration. And at the same confining pressure, with the increase of zinc ions concentration, the shear strength of contaminated reinforced soil first increases and then decreases. With the increase of zinc ions concentration, the internal friction angle and compression coefficient increase, the cohesion and the modulus of compression decrease. With the increase of normal stress, the compression coefficient decreases firstly and then increases, and the compression modulus increases and then decreases. With the concentration of zinc ions increases at lower normal stress, the amount of shrinkage increases and the compression coefficient decreases. While at higher normal stress, the compressive modulus decreases and the compression coefficient increases.
引用
收藏
页码:1071 / 1083
页数:13
相关论文
共 50 条
  • [41] Mechanical Properties of Fiber-Reinforced Permeable Geopolymer Concrete
    Xu, Lina
    Liu, Qilong
    Ding, Xu
    Sun, Shuang
    Huang, Zhanfang
    MATERIALS, 2023, 16 (17)
  • [42] Dynamic mechanical properties of fiber-reinforced concrete: A review
    Wu, Hansong
    Shen, Aiqin
    Ren, Guiping
    Ma, Qiang
    Wang, Zhe
    Cheng, Qianqian
    Li, Yue
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 366
  • [43] THE MECHANICAL-PROPERTIES OF WOOD FIBER-REINFORCED POLYMETHYLMETHACRYLATE
    MALDAS, D
    KOKTA, BV
    DANEAULT, C
    INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS, 1989, 12 (04) : 297 - 323
  • [44] Mechanical and Thermophysical Properties of Carbon Fiber-Reinforced Polyethersulfone
    Torokhov, Valerii G.
    Chukov, Dilyus, I
    Tcherdyntsev, Victor V.
    Sherif, Galal
    Zadorozhnyy, Mikhail Y.
    Stepashkin, Andrey A.
    Larin, Ilya I.
    Medvedeva, Elena, V
    POLYMERS, 2022, 14 (14)
  • [45] MECHANICAL-PROPERTIES OF CARBON FIBER-REINFORCED GLASSES
    HEGELER, H
    BRUCKNER, R
    JOURNAL OF MATERIALS SCIENCE, 1992, 27 (07) : 1901 - 1907
  • [46] Mechanical properties of woven glass fiber-reinforced composites
    Kanie, Takahito
    Arikawa, Hiroyuki
    Fujii, Koichi
    Ban, Seiji
    DENTAL MATERIALS JOURNAL, 2006, 25 (02) : 377 - 381
  • [47] Development and mechanical properties of adaptive fiber-reinforced plastics
    Ashir, Moniruddoza
    Nocke, Andreas
    Cherif, Chokri
    JOURNAL OF INDUSTRIAL TEXTILES, 2019, 48 (06) : 1081 - 1096
  • [48] Study on the mechanical properties of hydrate-bearing silty clay
    Zhang, X. H.
    Lu, X. B.
    Shi, Y. H.
    Xia, Z.
    MARINE AND PETROLEUM GEOLOGY, 2015, 67 : 72 - 80
  • [49] Modeling elastic properties of short flax fiber-reinforced composites by orientation averaging
    Modniks, J.
    Andersons, J.
    COMPUTATIONAL MATERIALS SCIENCE, 2010, 50 (02) : 595 - 599
  • [50] The Mechanical Properties of Plant Fiber-Reinforced Geopolymers: A Review
    Lv, Chun
    Liu, Jie
    Guo, Guoliang
    Zhang, Yanming
    POLYMERS, 2022, 14 (19)