High Cycle Fatigue Damage Mechanisms of MAR-M 247 Superalloy at High Temperatures

被引：18
|
作者：
Smid, M. [1 ,2 ]
Hornik, V. [1 ,3 ]
Hutar, P. [1 ]
Hrbacek, K. [4 ]
Kunz, L. [1 ]
机构：
[1] Acad Sci Czech Republic, Inst Phys Mat, Brno 61662, Czech Republic
[2] CEITEC IPM, Brno 61662, Czech Republic
[3] Brno Univ Technol, Tech 2, Brno 61669, Czech Republic
[4] Prvni Brnenska Strojirna Velka Bites As, Velka Bites 59512, Czech Republic
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2016年 / 69卷 / 02期
关键词：
High cycle fatigue; S-N curves; Fractography; High temperature; EBSD analysis; ELEVATED-TEMPERATURES; BASE SUPERALLOY; MAR-M247; BEHAVIOR; LC;
D O I：
10.1007/s12666-015-0817-0
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
High cycle fatigue tests of the MAR-M 247 superalloy under constant load were conducted with the aim to determine S-N curves at temperatures 650, 800, 900 and 950 A degrees C. It has been found that the slope of the S-N curves reflects changes of the cyclic deformation mechanism with temperature. At temperatures 650 and partly at 800 A degrees C, fatigue crack propagation exhibits crystallographic character (propagation along the {111} system) in early stages of the fatigue life. The crystallographic mode of the fatigue crack propagation was found to disappear at temperatures 900 and 950 A degrees C.
引用
收藏
页码：393 / 397
页数：5
相关论文
共 50 条
  • [31] Very high cycle fatigue behaviors of GH4169 superalloy at room and high temperatures
    Zhang, Zhen
    Teng, Zhenjie
    Wang, Jingyu
    Huang, Zhiyong
    Muenstermann, Sebastian
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2022, 45 (06) : 1796 - 1806
  • [32] EFFECT OF HIP ON LOW CYCLE FATIGUE OF MAR-M247 AT 900°C
    Sulak, Ivo
    Obrtlik, Karel
    Skorik, Viktor
    Hrbacek, Karel
    METAL 2014: 23RD INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2014, : 1381 - 1386
  • [33] LOW CYCLE FATIGUE BEHAVIOR OF CONVENTIONALLY CAST MAR-M 200 AT 1000 degree C.
    Milligan, Walter W.
    Bill, Robert C.
    NASA Technical Memorandum, 1984,
  • [34] LOW CYCLE FATIGUE BEHAVIOUR AND FATIGUE CRACK INITIATION IN MAR-M247 AT 700 °C
    Sulak, Ivo
    Obrtlik, Karel
    Hrbacek, Karel
    METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, : 1580 - 1586
  • [35] Numerical simulation and high cycle fatigue behaviour study on shot peening of MAR-M247 nickel-based alloy
    Jiang, Yunqing
    Liu, Meng
    Zou, Tongfei
    Wang, Quanyi
    Wu, Hao
    Pei, Yubing
    Zhang, Hong
    Liu, Yongjie
    Wang, Qingyuan
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 182
  • [36] Accelerated damage mechanisms of aluminized superalloy turbine blades regarding combined high-and-low cycle fatigue
    Wen, Jiongran
    Fei, Chengwei
    Ahn, Soung Yeoul
    Han, Lei
    Huang, Bo
    Liu, Yong
    Kim, Hyoung Seop
    SURFACE & COATINGS TECHNOLOGY, 2022, 451
  • [37] Microstructure Evolution of MAR-M302 Superalloy During Heat Treatment at High Temperatures
    Jafari, A.
    Khorram, A.
    Boutorabi, S. M. A.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (03) : 685 - 695
  • [38] Microstructure Evolution of MAR-M302 Superalloy During Heat Treatment at High Temperatures
    A. Jafari
    A. Khorram
    S. M. A. Boutorabi
    Transactions of the Indian Institute of Metals, 2018, 71 : 685 - 695
  • [39] The effects of Mg microaddition on the mechanical behavior and fracture mechanism of MAR-M247 superalloy at elevated temperatures
    Bor, HY
    Chao, CG
    Ma, CY
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (03): : 551 - 561
  • [40] STRUCTURAL PHASE ANALYSIS OF NICKEL SUPERALLOY MAR-M247
    Jonsta, Petr
    Konecna, Katerina
    Jonsta, Zdenek
    Gabcova, Miriam
    Hrbacek, Karel
    21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012), 2012, : 1511 - 1516
12345