High Cycle Fatigue Damage Mechanisms of MAR-M 247 Superalloy at High Temperatures

被引:18
|
作者
Smid, M. [1 ,2 ]
Hornik, V. [1 ,3 ]
Hutar, P. [1 ]
Hrbacek, K. [4 ]
Kunz, L. [1 ]
机构
[1] Acad Sci Czech Republic, Inst Phys Mat, Brno 61662, Czech Republic
[2] CEITEC IPM, Brno 61662, Czech Republic
[3] Brno Univ Technol, Tech 2, Brno 61669, Czech Republic
[4] Prvni Brnenska Strojirna Velka Bites As, Velka Bites 59512, Czech Republic
关键词
High cycle fatigue; S-N curves; Fractography; High temperature; EBSD analysis; ELEVATED-TEMPERATURES; BASE SUPERALLOY; MAR-M247; BEHAVIOR; LC;
D O I
10.1007/s12666-015-0817-0
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
High cycle fatigue tests of the MAR-M 247 superalloy under constant load were conducted with the aim to determine S-N curves at temperatures 650, 800, 900 and 950 A degrees C. It has been found that the slope of the S-N curves reflects changes of the cyclic deformation mechanism with temperature. At temperatures 650 and partly at 800 A degrees C, fatigue crack propagation exhibits crystallographic character (propagation along the {111} system) in early stages of the fatigue life. The crystallographic mode of the fatigue crack propagation was found to disappear at temperatures 900 and 950 A degrees C.
引用
收藏
页码:393 / 397
页数:5
相关论文
共 50 条
  • [21] The low cycle fatigue behaviour of MAR-M247 superalloy under different strain rates and cycle shapes at 750?C
    Sulak, I.
    Obrtlik, K.
    Babinsky, T.
    Guth, S.
    INTERNATIONAL JOURNAL OF FATIGUE, 2022, 164
  • [22] Effect of Aluminide Coating Thickness on High-Temperature Fatigue Response of MAR-M247 Nickel-Based Superalloy
    Kopec, Mateusz
    COATINGS, 2024, 14 (08)
  • [23] Creep behavior of MAR-M 302 Co-base superalloy
    M. Aghaie-Khafri
    B. Binesh
    Journal of Materials Science, 2010, 45 : 3990 - 3997
  • [24] Creep behavior of MAR-M 302 Co-base superalloy
    Aghaie-Khafri, M.
    Binesh, B.
    JOURNAL OF MATERIALS SCIENCE, 2010, 45 (15) : 3990 - 3997
  • [25] High-cycle fatigue behavior of IN 738LC superalloy at high temperatures
    Hornik, Vit
    Baca, Adrian
    Smid, Miroslav
    Hrbacek, Karel
    Hutar, Pavel
    10TH INTERNATIONAL CONFERENCE ON MATERIALS STRUCTURE AND MICROMECHANICS OF FRACTURE, MSMF, 2023, 43 : 136 - 141
  • [26] High cycle fatigue behavior of a single crystal superalloy at elevated temperatures
    Liu, Y.
    Yu, J. J.
    Xu, Y.
    Sun, X. F.
    Guan, H. R.
    Hu, Z. Q.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 454 : 357 - 366
  • [27] Tension torsion multiaxial low cycle fatigue of Mar-M247LC directionally solidified superalloy at elevated temperature
    Shirafuji, N
    Shimomizuki, K
    Sakane, M
    Ohnami, M
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1998, 120 (01): : 57 - 63
  • [28] Milling of MAR-M247 nickel-based superalloy with high temperature and ultrasonic aiding
    Hsu, C. Y.
    Huang, C. K.
    Wu, C. Y.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 34 (9-10): : 857 - 866
  • [29] Milling of MAR-M247 nickel-based superalloy with high temperature and ultrasonic aiding
    C. Y. Hsu
    C. K. Huang
    C. Y. Wu
    The International Journal of Advanced Manufacturing Technology, 2007, 34 : 857 - 866
  • [30] THERMAL CONDUCTIVITY OF NICKEL SUPERALLOY MAR-M247
    Jonsta, P.
    Kostial, P.
    Jonsta, Z.
    Vlckova, I.
    Kulova, T.
    METALURGIJA, 2016, 55 (03): : 420 - 422