Masked and Unmasked Machining of Glass by Micro Abrasive Jet

被引：3
|
作者：
Qiu, Y. F. [1 ]
Wang, C. Y. [1 ]
Wang, J. [1 ]
Song, Y. X. [1 ]
机构：
[1] Guangdong Univ Technol, Fac Mech & Elect Engn, Guangzhou 510006, Guangdong, Peoples R China
来源：
ULTRA-PRECISION MACHINING TECHNOLOGIES | 2009年 / 69-70卷
关键词：
Micro abrasive; Jet machining; Masked; Structure profile;
D O I：
10.4028/www.scientific.net/AMR.69-70.182
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The micro abrasive jet machining is used to make the microfluidic channels on the glass substrate. Based on the tests with or without masks, the structure profile and erosion rate with different basic machining parameters, such as nozzle standoff distance, scanning speed, abrasive mass flow rate etc. are investigated. The optimum parameters for micro-structure machining of glass is discussed. The effect of the secondary rebounding particles in mask underetching was analyzed using oblique machining. And the flux effect was also studied comparing with the unmasked machining.
引用
收藏
页码：182 / +
页数：2
相关论文
共 50 条
  • [41] Development of rapid mask fabrication technology for micro-abrasive jet machining
    Seung Pyo Lee
    Hyun-Wook Kang
    Seung-Jae Lee
    In Hwan Lee
    Tae Jo Ko
    Dong-Woo Cho
    [J]. Journal of Mechanical Science and Technology, 2008, 22 : 2190 - 2196
  • [42] Fluidised Bed Hot Abrasive Jet Machining of Borosilicate Glass with Zircon Sand
    Nanda, B. K.
    Das, Diptikanta
    Nayak, R. K.
    Mishra, S. B.
    Routara, B. C.
    Dhupal, D.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 2993 - 3000
  • [43] Abrasive jet machining of channels on highly-curved glass and PMMA surfaces
    Nouhi, A.
    Kowsari, K.
    Spelt, J. K.
    Papini, M.
    [J]. WEAR, 2016, 356-357 : 30 - 39
  • [44] Prediction of machined surface evolution in the abrasive jet micro-machining of metals
    Ally, S.
    Spelt, J. K.
    Papini, M.
    [J]. WEAR, 2012, 292 : 89 - 99
  • [45] Development of rapid mask fabrication technology for micro-abrasive jet machining
    Lee, Seung Pyo
    Kang, Hyun-Wook
    Lee, Seung-Jae
    Lee, In Hwan
    Ko, Tae Jo
    Cho, Dong-Woo
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2008, 22 (11) : 2190 - 2196
  • [46] Abrasive slurry jet micro-machining of holes in brittle and ductile materials
    Kowsari, K.
    Nouraei, H.
    James, D. F.
    Spelt, J. K.
    Papini, M.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (09) : 1909 - 1920
  • [47] Implementation of a shadow mask for direct writing in abrasive jet micro-machining
    Nouhi, A.
    Lari, M. R. Sookhak
    Spelt, J. K.
    Papini, M.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 223 : 232 - 239
  • [48] Study on Pre-mixed Micro Abrasive Water Jet Machining System
    Liu, Z. W.
    Liu, R. Y.
    [J]. MATERIALS, MACHINES AND DEVELOPMENT OF TECHNOLOGIES FOR INDUSTRIAL PRODUCTION, 2014, 618 : 475 - +
  • [49] Dust reduction in abrasive jet micro-machining using liquid films
    Jafar, R. H. M.
    Hadavi, V.
    Spelt, J. K.
    Papini, M.
    [J]. POWDER TECHNOLOGY, 2016, 301 : 1270 - 1274
  • [50] Modeling the Material Removal Rate in Micro Abrasive Water Jet Machining of Glasses
    Fan, Jingming
    Fan, Changming
    Wang, Jun
    [J]. SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II, 2010, 135 : 370 - +
12345