Masked and Unmasked Machining of Glass by Micro Abrasive Jet

被引：3
|
作者：
Qiu, Y. F. [1 ]
Wang, C. Y. [1 ]
Wang, J. [1 ]
Song, Y. X. [1 ]
机构：
[1] Guangdong Univ Technol, Fac Mech & Elect Engn, Guangzhou 510006, Guangdong, Peoples R China
来源：
ULTRA-PRECISION MACHINING TECHNOLOGIES | 2009年 / 69-70卷
关键词：
Micro abrasive; Jet machining; Masked; Structure profile;
D O I：
10.4028/www.scientific.net/AMR.69-70.182
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The micro abrasive jet machining is used to make the microfluidic channels on the glass substrate. Based on the tests with or without masks, the structure profile and erosion rate with different basic machining parameters, such as nozzle standoff distance, scanning speed, abrasive mass flow rate etc. are investigated. The optimum parameters for micro-structure machining of glass is discussed. The effect of the secondary rebounding particles in mask underetching was analyzed using oblique machining. And the flux effect was also studied comparing with the unmasked machining.
引用
收藏
页码：182 / +
页数：2
相关论文
共 50 条
  • [1] Masked micro-channel machining in aluminum alloy and borosilicate glass using abrasive water jet micro-machining
    Haghbin, Naser
    Ahmadzadeh, Farbod
    Papini, Marcello
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2018, 35 : 307 - 316
  • [2] Micro-grooving of glass using micro-abrasive jet machining
    Park, DS
    Cho, MW
    Lee, H
    Cho, WS
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 146 (02) : 234 - 240
  • [3] Effect of nozzle type and abrasive on machinablity in micro abrasive air jet machining of glass
    Fan, Jingming
    Wang, Chengyong
    Wang, Jun
    Lu, Guosheng
    [J]. ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XIV, 2008, 359-360 : 404 - +
  • [4] Simulation of erosive smoothing in the abrasive jet micro-machining of glass
    Jafar, R. Haj Mohammad
    Papini, M.
    Spelt, J. K.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2013, 213 (12) : 2254 - 2261
  • [5] Characteristics of abrasive slurry jet micro-machining: A comparison with abrasive air jet micro-machining
    Nouraei, H.
    Wodoslawsky, A.
    Papini, M.
    Spelt, J. K.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2013, 213 (10) : 1711 - 1724
  • [6] Machining of Micro-channels on Brittle Glass Using an Abrasive Slurry Jet
    Pang, King Lun
    Nguyen, Thai
    Fan, Jingming
    Wang, Jun
    [J]. ADVANCES IN MATERIALS PROCESSING IX, 2010, 443 : 639 - +
  • [7] Abrasive Jet Machining for Micro-hole Drilling on Glass and GFRP Composites
    Suresh, R.
    Reddy, Sohit K.
    Shapur, Karthik
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 5757 - 5761
  • [8] Deterministic Process Modelling of Micro Air Abrasive Jet Machining of Glass Channel
    Wan, Stephen
    Fong, Weng Seng
    Leong, Qi Ying
    [J]. ADVANCED PRECISION ENGINEERING, 2010, 447-448 : 272 - +
  • [9] Investigation into micro abrasive intermittent jet machining
    Zhang, L
    Kuriyagawa, T
    Yasutomi, U
    Zhao, J
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2005, 45 (7-8): : 873 - 879
  • [10] Abrasive jet turning of glass and PMMA rods and the micro-machining of helical channels
    Nouhi, A.
    Spelt, J. K.
    Papini, M.
    [J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2018, 53 : 151 - 162
12345