Equivalent electrical network for performance characterization of piezoelectric peristaltic micropump

Utilizing an electronic-hydraulic analogy, this study develops an equivalent electrical network of a piezoelectric peristaltic micropump which has not been modeled the whole system operation completely by computational fluid dynamics (CFD) or equivalent electrical network so far due to its excessive complicated structure. The validity of the proposed model is verified by comparing the simulation results obtained using the SPICE (simulation program with integrated circuit emphasis) software package for flow rate spectrum and its maximum state of a typical micropump with the experimental observations for two working fluids, namely DI water and blood. The simulation results predict a maximum flow rate frequency and flow rate of 280 Hz and 43.23 mu L/min, respectively, for water, and 210 Hz and 24.12 mu L/min for blood. The corresponding experimental results are found to be 300 Hz and 41.58 mu L/min for water and 250 Hz and 23.75 mu L/min for blood. The relatively poorer agreement between the two sets of results when using blood as the working fluid is thought to be the result of the non-Newtonian nature of blood, which induces a more complex, non-linear flow behavior within the micropump. Having validated the proposed model, the equivalent network is used to perform a systematic analysis of the correlation between the principal micropump design parameters and operating conditions and the micropump performance. The results confirm the validity of the equivalent electrical network model as the first microfluidic modeling tool for optimizing the design of peristaltic micropumps and for predicting their performance.