Evaluation of the electromechanical properties in GdBCO coated conductor tapes under low cyclic loading and bending

被引:16
|
作者
Shin, Hyung-Seop [1 ]
Gorospe, Alking [1 ]
Bautista, Zhierwinjay [1 ]
Dedicatoria, Marlon J. [1 ]
机构
[1] Andong Natl Univ, Dept Mech Design Engn, Andong 760749, South Korea
来源
SUPERCONDUCTOR SCIENCE & TECHNOLOGY | 2016年 / 29卷 / 01期
基金
新加坡国家研究基金会;
关键词
coated conductor; cyclic loading; cyclic bending; electromechanical property; transverse tension; STRAIN; BEHAVIOR; STRESS;
D O I
10.1088/0953-2048/29/1/014001
中图分类号
O59 [应用物理学];
学科分类号
摘要
The effects of low cyclic loading on the critical current, I-c, under uniaxial and transverse loadings, and bending deformations in GdBCO coated conductor (CC) tapes were evaluated. Under monotonic continuous bending deformation, CC tapes exhibit a high tolerance of I-c up to the lowest bending diameter of 12 mm using the Goldacker bending test rig. However, when the CC tape was subjected to alternate tension-compression bending, a lower irreversible bending strain limit was measured. This was also observed when cyclic bending was applied to the CC tapes which showed a significant decrease in I-c just after 10 cycles of alternate tension-compression bending at 20 mm bending diameter. Such different I-c degradation behavior under different bending deformation procedures gave insight into the proper handling of CC tapes from manufacturing, coiling and up to operating conditions. In the case of uniaxial tension, when electromechanical properties of CC tape were evaluated by repeated loading based on a critical stress level obtained under monotonic loading, I-c also did not show significant change in its degradation behavior up to the irreversible stress limit. The GdBCO CC tape adopted can allow cyclic loading up to 100 cycles without significant irreversible degradation below the monotonic irreversible limit. In the case of the transverse cyclic test, with regard to the large scattering of data especially in the tensile direction, a different cyclic loading procedure was established. For 10 repeated loadings, the mechanical and electromechanical properties of the GdBCO CC tapes showed similar values within the reversible range under the monotonic loading. I-c degraded abruptly indicating that no delamination occurred at the REBCO film during the subcritical cyclic loading. Different fracture morphologies were observed under cyclic loading depicting branch-like patterns of the remaining REBCO layer on the substrate of the CC tape.
引用
收藏
页数:12
相关论文
共 50 条
  • [31] Thermal Quench Behaviors of No-Insulation Coils Wound Using GdBCO Coated Conductor Tapes With Various Lamination Materials
    Choi, Yoon Hyuck
    Kwon, Oh Jun
    Kim, Young-Gyun
    Song, Jung-Bin
    Kim, Ji Hyung
    Kim, Ho-Min
    Lee, Haigun
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2014, 24 (03)
  • [32] Ic-Strain Performance of REBCO Coated-Conductor Tapes Under Low Magnetic Field
    Shin, Hyung-Seop
    Dedicatoria, Marlon James
    Gorospe, Alking
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2016, 26 (04)
  • [33] CYCLIC BENDING OF PLATES UNDER TRANSVERSE LOADING
    FUKUMOTO, Y
    KUSAMA, H
    JOURNAL OF THE ENGINEERING MECHANICS DIVISION-ASCE, 1982, 108 (03): : 477 - 492
  • [34] Effect of Mechanical Loading on Coated Conductor Tapes Due to Winding Onto Round Cables
    Pekarcikova, Marcela
    Michalcova, Eva
    Frolek, Lubomir
    Souc, Jan
    Gogola, Peter
    Drienovsky, Marian
    Skarba, Michal
    Misik, Jozef
    Gomory, Fedor
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2018, 28 (04)
  • [35] Evaluation of Mechanical Properties of Catheter Shafts under Cyclic Bending
    Hijikata, Ryojiro
    Shiraiwa, Takayuki
    Enoki, Manabu
    Matsubara, Kensuke
    Tokumoto, Kei
    MATERIALS TRANSACTIONS, 2017, 58 (07) : 1049 - 1054
  • [36] Establishing a test procedure for evaluating the electromechanical properties of practical REBCO coated conductor tapes by the uniaxial tension test at 77K
    Shin, Hyung-Seop
    Bautista, Zhierwinjay
    SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2019, 32 (06):
  • [37] Evaluation of dynamic properties of unsaturated soils under cyclic loading
    Showkat, Rakshanda
    Singh, Saket Kumar
    Babu, G. L. Sivakumar
    SOIL DYNAMICS AND EARTHQUAKE ENGINEERING, 2025, 190
  • [38] Bending and polarization switching of piezoelectric laminated actuators under electromechanical loading
    Narita, F
    Shindo, Y
    Hayashi, K
    COMPUTERS & STRUCTURES, 2005, 83 (15-16) : 1164 - 1170
  • [39] Bending behavior of fiber concrete under cyclic loading
    Boulekbache, Bensaid
    Hamrat, Mostefa
    Chemrouk, Mohamed
    Amziane, Sofiane
    INTERNATIONAL CONGRESS ON MATERIALS & STRUCTURAL STABILITY, 2014, 11
  • [40] Proof tests of REBCO coated conductor tapes for device applications through electromechanical property assessment at 77 K
    Diaz, Mark Angelo
    De Leon, Michael
    Shin, Hyung-Seop
    Jung, Ho-Sang
    Lee, Jaehun
    PROGRESS IN SUPERCONDUCTIVITY AND CRYOGENICS, 2023, 25 (03): : 34 - 37