Design and analysis of a novel six-degrees-of-freedom precision positioning table

被引:3
|
作者
Fung, R-F [1 ,2 ]
Fan, C-T [1 ]
Lin, W-C [1 ]
机构
[1] Natl Kaohsiung First Univ Sci & Technol, Dept Mech & Automat Engn, Kaohsiung 824, Taiwan
[2] Natl Kaohsiung First Univ Sci & Technol, Grad Inst Electroopt Engn, Kaohsiung 824, Taiwan
关键词
three-DOF; six-DOF; precision positioning tables; piezoelectric actuator; transfer matrix;
D O I
10.1243/09544062JMES1284
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The purpose of this study is to design and analyse a novel six-degrees-of-freedom (DOF) precision positioning table, which is assembled by two different kinds of three-DOF precision positioning tables: a plane-type three-DOF (X, Y, theta(z)) precision positioning table and a cylinder-type three-DOF (theta(x), theta(y), Z) one, and each table is driven by three piezoelectric actuators (PAs). In this paper, the Bouc-Wen model is employed to describe the hystereric phenomenon of the PAs. The transfer matrices with cross-coupling terms between the output displacements and input voltages are derived from the dynamic equations in the steady-state conditions. In order to obtain the best transfer matrix, experimental measurements of the whole six-DOF table are compared with those from the two individual three-DOF precision positioning tables. Finally, the transfer matrices with better performance for the two three-DOF tables and the novel six-DOF table are obtained.
引用
收藏
页码:1203 / 1212
页数:10
相关论文
共 50 条
  • [41] Workspace, Singularity, and Dexterity Analyses of a Six-Degrees-of-Freedom SDelta Robot With an Orthogonal Base Platform
    Toz, Metin
    Han, Hasiaoqier
    Angeles, Jorge
    JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2024, 16 (07):
  • [42] Evaluation of Binaural Reproduction Systems from Behavioral Patterns in a Six-Degrees-of-Freedom Wayfinding Task
    Rummukainen, Olli
    Schlecht, Sebastian
    Plinge, Axel
    Habets, Emanuel A. P.
    2017 NINTH INTERNATIONAL CONFERENCE ON QUALITY OF MULTIMEDIA EXPERIENCE (QOMEX), 2017,
  • [43] Analysis and optimization design of six degrees of freedom engine mount system
    Zhang H.-J.
    Hao H.-R.
    Guo Z.-P.
    Zhendong Gongcheng Xuebao/Journal of Vibration Engineering, 2019, 32 (05): : 801 - 810
  • [44] DISCRETE ELEMENT ANALYSIS OF ICE RESISTANCES AND SIX-DEGREES-OF-FREEDOM MOTION RESPONSE OF SHIPS IN ICE-COVERED REGIONS
    Wang X.
    Hu B.
    Liu L.
    Ji S.-Y.
    Gongcheng Lixue/Engineering Mechanics, 2023, 40 (04): : 243 - 256
  • [45] Six-degrees-of-freedom dynamic load identification of compressors for refrigeration system based on rigid body dynamics
    Long, Danfeng
    Zhong, Min
    Si, Weizheng
    Guo, Weike
    Zhang, Liang
    JOURNAL OF VIBRATION AND CONTROL, 2023, 29 (19-20) : 4706 - 4717
  • [46] The Stewart Hand: A Highly Dexterous, Six-Degrees-of-Freedom Manipulator Based on the Stewart-Gough Platform
    McCann C.
    Patel V.
    Dollar A.
    IEEE Robotics and Automation Magazine, 2021, 28 (02): : 23 - 36
  • [47] Object-Based Six-Degrees-of-Freedom Rendering of Sound Scenes Captured with Multiple Ambisonic Receivers
    McCormack L.
    Politis A.
    McKenzie T.
    Hold C.
    Pulkki V.
    AES: Journal of the Audio Engineering Society, 2022, 70 (05): : 355 - 372
  • [48] Six-Degrees-of-Freedom Test Mass Readout via Optical Phase-Locking Heterodyne Interferometry
    Xu, Xin
    Liu, Jinsong
    Mu, Henglin
    Li, Yan
    Tan, Yidong
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2024, 73
  • [49] Development of a robotic system with six-degrees-of-freedom robotic tool manipulators for single-port surgery
    Kobayashi, Yo
    Sekiguchi, Yuta
    Noguchi, Takehiko
    Takahashi, Yu
    Liu, Quanquan
    Oguri, Susumu
    Toyoda, Kazutaka
    Uemura, Munenori
    Ieiri, Satoshi
    Tomikawa, Morimasa
    Ohdaira, Takeshi
    Hashizume, Makoto
    Fujie, Masaktsu G.
    INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY, 2015, 11 (02): : 235 - 246
  • [50] Production of six-degrees-of-freedom (6DoF) navigable audio using 30 Ambisonic microphones
    Mroz, Bartlomiej
    Kabacinski, Marek
    Ciotucha, Tomasz
    Ruminski, Andrzej
    Zernicki, Tomasz
    2021 IMMERSIVE AND 3D AUDIO: FROM ARCHITECTURE TO AUTOMOTIVE (I3DA), 2021,