No Load Loss and Component Separation for Induction Machines

被引：0

作者：

Germishuizen, Johannes ^{[1
]}

Stanton, Scott ^{[2
]}

机构：

[1] Loher A Siemens Co, Ruhstorf, Germany

[2] Ansoft Corp, Pittsburgh, PA USA

来源：

ICEM: 2008 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES, VOLS 1- 4 | 2009年

关键词：

MOTORS;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Core loss and excess rotor copper loss due to flux pulsations in the air gap are difficult to measure, and are present in every squirrel cage induction motor. These losses depend mainly on the geometric topology. This paper will explain the techniques used to measure the total no load loss and how this can be separated into individual components. Special attention is given to the calculated and measured iron loss components and how the difference could be accounted for in the design phase.

引用

页码：1392 / +

页数：2

共 50 条

[31] Additional losses in induction machines under synchronous no-load conditions
Bottauscio, O
Chiampi, M
Manzin, A
Zucca, M
IEEE TRANSACTIONS ON MAGNETICS, 2004, 40 (05) : 3254 - 3261
[32] Equivalent load test for large induction machines - The three step method
Portos, J
Turner, S
INDUSTRY APPLICATIONS SOCIETY 51ST ANNUAL PETROLEUM AND CHEMICAL INDUSTRY TECHNICAL CONFERENCE, 2004, : 319 - 323
[33] Equivalent load test for induction machines - The Forward Short Circuit Test
Plevin, DH
Glew, CN
Dymond, JH
IEEE TRANSACTIONS ON ENERGY CONVERSION, 1999, 14 (03) : 419 - 425
[34] Analysis of Electromagnetic Torque of Induction Machines with the Load Torque Changes Suddenly
Cai, Xinjian
Wu, Zhenxing
Sun, Le
2014 17TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2014, : 101 - 105
[35] Linear Induction Machines for Electrodynamic Separation of Non-Ferrous Metals
Obvintseva, Evgeniya Yu.
Konyaev, Andrey Yu.
PROCEEDINGS OF THE 2017 IEEE RUSSIA SECTION YOUNG RESEARCHERS IN ELECTRICAL AND ELECTRONIC ENGINEERING CONFERENCE (2017 ELCONRUS), 2017, : 1567 - 1570
[36] Rotor flux oriented control of induction machines considering the core loss
Levi, E
ELECTRIC MACHINES AND POWER SYSTEMS, 1996, 24 (01): : 37 - 50
[37] Operating Point Resolved Loss Calculation Approach in Saturated Induction Machines
Von Pfingsten, Georg
Steentjes, Simon
Hameyer, Kay
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2017, 64 (03) : 2538 - 2546
[38] Harmonic loss due to operation of induction machines from matrix converters
Wheeler, Patrick W.
Clare, Jon C.
Apap, Maurice
Bradley, Keith J.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2008, 55 (02) : 809 - 816
[39] Analytical and experimental study of electromagnetic loss and temperature rise in induction machines
Ban, Hwi-Rang
Yu, Kyeong-Tae
Lee, Ju-Hyeong
Choi, Jang-Young
Sung, Soyoung
Park, Jung-Hyung
Cho, Han-Wook
Shin, Kyung-Hun
AIP ADVANCES, 2024, 14 (03)
[40] Loss Minimizing and Saturation Dependent Control of Induction Machines in Vehicle Applications
Windisch, Thomas
Hofmann, Wilfried
IECON 2015 - 41ST ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2015, : 1530 - 1535

← 1 2 3 4 5 →