No Load Loss and Component Separation for Induction Machines

被引：0

作者：

Germishuizen, Johannes ^{[1
]}

Stanton, Scott ^{[2
]}

机构：

[1] Loher A Siemens Co, Ruhstorf, Germany

[2] Ansoft Corp, Pittsburgh, PA USA

来源：

ICEM: 2008 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES, VOLS 1- 4 | 2009年

关键词：

MOTORS;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Core loss and excess rotor copper loss due to flux pulsations in the air gap are difficult to measure, and are present in every squirrel cage induction motor. These losses depend mainly on the geometric topology. This paper will explain the techniques used to measure the total no load loss and how this can be separated into individual components. Special attention is given to the calculated and measured iron loss components and how the difference could be accounted for in the design phase.

引用

页码：1392 / +

页数：2

共 50 条

[21] Enhanced harmonic injection for determination of harmonic loss in induction machines
Bradley, K.J
Clare, J.C
Ferrah, R.Magill A.
Wheeler, P.
Sewell, P.
Cao, W.
IEE Conference Publication, 2000, (475): : 212 - 217
[22] Sensorless DTC of induction machines with complete core loss compensation
Pham-Dinh, T
Levi, E
INTERNATIONAL CONFERENCE ON POWER ELECTRONICS, MACHINES AND DRIVES, 2002, (487): : 98 - 103
[23] Loss Evaluation on Induction Machines made with Soft Magnetic Composite
Inoue, S.
Shimomura, S.
Morimoto, M.
2012 15TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2012), 2012,
[24] Impact of iron loss on behavior of vector controlled induction machines
Levi, E
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1995, 31 (06) : 1287 - 1296
[25] Modified harmonic loss model in PWM fed induction machines
Kinnares, V
Potivejkul, S
Sawetsakulanond, B
APCCAS '98 - IEEE ASIA-PACIFIC CONFERENCE ON CIRCUITS AND SYSTEMS: MICROELECTRONICS AND INTEGRATING SYSTEMS, 1998, : 535 - 538
[26] A detailed modular approach for induction machines considering iron loss
Khaligh, A
Nagel, N
Emadi, A
IECON 2005: THIRTY-FIRST ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1-3, 2005, : 1593 - 1598
[27] Parameter identification of induction machines with consideration of rotor core loss
Chen, Woei-Luen
Cheng, Kai-Mou
International Journal of Electrical Engineering, 2014, 21 (01): : 13 - 20
[28] A Symmetrical Component Feature Extraction Method for Fault Detection in Induction Machines
St-Onge, Xavier F.
Cameron, James
Saleh, Saleh
Scheme, Erik J.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2019, 66 (09) : 7281 - 7289
[29] Fault diagnosis for induction machines using kernel principal component analysis
Park, Jang-Hwan
Lee, Dae-Jong
Chun, Myung-Geun
ADVANCES IN NEURAL NETWORKS - ISNN 2006, PT 3, PROCEEDINGS, 2006, 3973 : 406 - 413
[30] On-Line Identification of Winding Resistances and Load Torque in Induction Machines
Verrelli, Cristiano Maria
Savoia, Alberto
Mengoni, Michele
Marino, Riccardo
Tomei, Patrizio
Zarri, Luca
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 2014, 22 (04) : 1629 - 1637

← 1 2 3 4 5 →