Development of front-end readout electronics for high time resolution measurements with UFSD

被引:0
|
作者
Olave, J. [1 ]
Fausti, F. [1 ]
Cartiglia, N. [1 ]
Ferrero, M. [1 ]
Arcidiacono, R. [1 ,2 ]
Mandurrino, M. [1 ]
Sola, V [1 ,3 ]
Staiano, A. [1 ]
Mazza, S. [4 ]
机构
[1] Ist Nazl Fis Nucl, Sect Torino, Turin, Italy
[2] Univ Piemonte Orientate, Vercelli, VC, Italy
[3] Univ Torino, Turin, Italy
[4] Univ Calif Santa Cruz, SCIPP, Santa Cruz, CA 95064 USA
基金
欧洲研究理事会;
关键词
ASIC; front-end electronics; UFSD sensors; timing measurements;
D O I
暂无
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
The research of a few tens of pico-seconds accuracy in timing measurements is currently a hot topic not only in the field of high energy physics but also in several applied physics branches. The Ultra Fast Silicon Detector group of the Turin section of the INFN is involved in this challenge, developing extremely fast silicon sensors. This group spent the recent years simulating and designing UFSD devices, which are essentially a particular type of Low Gain Avalanche Diodes optimized for timing application. These innovative devices for particle tracking are furthermore suitable for a very accurate time measure. The novelty improving the time tagging capability is enabled by the inclusion of a controlled low gain in the detector response, therefore increasing the detector output signal amplitude while keeping controlled the noise. A fast detecting system requires a high-performance front-end electronics to be coupled with the sensors. In cutting-edge experiments like the High-Luminosity LHC, both high spatial and time resolutions are strict constraints. Therefore, highly segmented sensors are employed, implying high density of channels and integrated VLSI electronics. Thanks to the experience gained with the development and the characterization of other timing ASICs, the group is currently exploring various design possibilities for low power front-end electronics to be coupled with UFSDs. The design approach is based on the study of different amplifier architectures, with a dedicated study on the delays introduced by parasitic components. Moreover, taking advantage of different scaled and ultra-scaled CMOS technology nodes, it will be possible to compare among various technology features changing with thThe research of a few tens of pico-seconds accuracy in timing measurements is currently a hot topic not only in the field of high energy physics but also in several applied physics branches. The Ultra Fast Silicon Detector group of the Turin section of the INFN is involved in this challenge, developing extremely fast silicon sensors. This group spent the recent years simulating and designing Ultra-Fast Silicon Detectors (UFSDs), pe of Low Gain Avalanche Diodes optimized for timing application. These innovative devices for particle tracking are furthermore suitable for a very accurate time measure. The novelty improving the time tagging capability is enabled by the inclusion of a controlled low gain in the detector response, therefore increasing the detector output signal amplitude while keeping controlled the noise. A fast detecting system requires a high-performance front-end electronics to be coupled with the sensors. In cutting-edge experiments like the High-Luminosity LHC, both high spatial and time resolutions are strict constraints. Therefore, highly segmented sensors are employed, implying high density of channels and integrated VLSI electronics. Thanks to the experience gained with the development and the characterization of other timing ASICs, the group is currently exploring various design possibilities for low power front-end electronics to be coupled with UFSDs. The design approach is based on the study of different amplifier architectures, with a dedicated study on the delays introduced by parasitic components. Moreover, taking advantage of different scaled and ultra-scaled CMOS technology nodes, it will be possible to compare among various technology features changing with the technology scaling. After an extensive phase of study and design simulation, our group is planning to develop a multichannel ASIC in a commercial 110 mu m technology. The planned prototype is a 2 mm x 5 mm chip consisting of 24 channels.
引用
收藏
页数:3
相关论文
共 50 条
  • [31] Front-end electronics for PHENIX time expansion chamber
    Barish, K
    Chang, WC
    Dietzsch, O
    Ferdousi, T
    Franz, A
    Fried, J
    Fung, SY
    Gannon, J
    Harder, J
    Kandasamy, A
    Kelley, MA
    Kotchetkov, D
    Lebedev, A
    Li, XH
    Mahon, J
    Mioduszewski, S
    Muniruzzamann, M
    Nandi, B
    O'Brien, E
    O'Connor, P
    Pisani, R
    Rankowitz, S
    Rosati, M
    Seto, R
    Takagui, EM
    Von Achen, W
    Wang, HQ
    Xie, W
    2001 IEEE NUCLEAR SCIENCE SYMPOSIUM, CONFERENCE RECORDS, VOLS 1-4, 2002, : 604 - 608
  • [32] LHC front-end electronics
    Hall, G
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2000, 453 (1-2): : 353 - 364
  • [33] Optimizing position readout circuits in positron emission tomography front-end electronics
    Zhang, N
    Thompson, CJ
    IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 2003, 50 (05) : 1398 - 1403
  • [34] Irradiation tests of the pixel front-end readout electronics for the ALICE experiment at LHC
    Badalà, A
    Barbera, R
    Lo Re, G
    Palmeri, A
    Pappalardo, GS
    Riggi, F
    Di Liberto, S
    Meddi, F
    Cavagnoli, A
    Morando, M
    Scarlassara, F
    Segato, G
    Soramel, F
    Vannucci, L
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2002, 476 (03): : 765 - 769
  • [35] Front-end electronics for PHENIX time expansion chamber
    Barish, K
    Chang, WC
    Dietzsch, O
    Ferdousi, T
    Franz, A
    Fried, J
    Fung, SY
    Gannon, J
    Harder, J
    Kandasamy, A
    Kelley, MA
    Kotchetkov, D
    Lebedev, A
    Li, XH
    Mahon, J
    Mioduszewski, S
    Muniruzzaman, M
    Nandi, B
    O'Brien, E
    O'Connor, P
    Pisani, R
    Rankowitz, S
    Rosati, M
    Seto, R
    Takagui, EM
    Von Achen, W
    Wang, HQ
    Xie, W
    IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 2002, 49 (03) : 1141 - 1146
  • [36] Development of a low-noise front-end electronics for a multi-channel APD readout system
    Hiraide, Katsuki
    Murakami, Takeshi
    Tanaka, Manobu
    Yokoyama, Masashi
    Nakaya, Tsuyoshi
    Nishikawa, Koichiro
    2005 IEEE NUCLEAR SCIENCE SYMPOSIUM CONFERENCE RECORD, VOLS 1-5, 2005, : 580 - 583
  • [37] The front-end readout electronics for the PANDA Focussing-Lightguide Disc DIRC
    Cowie, E.
    Foehl, K.
    Glazier, D.
    Hill, G.
    Hoek, M.
    Kaiser, R.
    Keri, T.
    Murray, M.
    Rosner, G.
    Seitz, B.
    JOURNAL OF INSTRUMENTATION, 2009, 4
  • [38] Front-end readout electronics considerations for Silicon Tracking System and Muon Chamber
    Kasinski, K.
    Kleczek, R.
    Szczygiel, R.
    JOURNAL OF INSTRUMENTATION, 2016, 11
  • [39] Comparative analysis of the readout front-end electronics implemented in deep submicron technologies
    Kleczek, R.
    Kmon, P.
    JOURNAL OF INSTRUMENTATION, 2018, 13
  • [40] Optimize position readout circuits in positron emission tomography front-end electronics
    Zhang, N
    Thompson, CJ
    Cayouette, F
    2002 IEEE NUCLEAR SCIENCE SYMPOSIUM, CONFERENCE RECORD, VOLS 1-3, 2003, : 1352 - 1356