A CASD/CASM method for prosthetic socket fabrication using the FDM technology

被引：24

作者：

Tay, FEH ^{[1
]}

Manna, MA ^{[1
]}

Liu, LX ^{[1
]}

机构：

[1] Natl Univ Singapore, Dept Mech Engn, Singapore 117548, Singapore

来源：

RAPID PROTOTYPING JOURNAL | 2002年 / 8卷 / 04期

关键词：

fused deposition modeling; CAD/CAM; disabled people; rapid prototyping;

D O I：

10.1108/13552540210441175

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

As an application of the computer aided design and computer aided manufacturing (CAD/CAM) technology in prosthetics, computer aided socket design and computer aided socket manufacturing (CASD/CASM) is becoming an active field in the prosthetics research. In this paper, a CASD/CASM method for prosthetic socket fabrication is described in detail. This is different from other fabrication methods in its novel combination of the CAD/CAM technology with fused deposition modeling (FDM) technology. Prosthetic sockets for volunteer amputees have been designed and fabricated in a FDM machine. In order to test the fabrication result, a final product was used to perform a clinical trial and some results are reported. In addition, the deficiency of the long fabrication time is addressed and some feasible solutions are discussed.

引用

页码：258 / 262

页数：5

共 50 条

[1] Preparation of base materials for prosthetic socket fabrication
Ma, Lifang
Chen, Yu
Tao, Chunjing
Yan, Heping
Cui, Guoliang
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2014, 8 (11-12): : 1195 - 1199
[2] Fabrication and application of an adjustable myoelectric transhumeral prosthetic socket
Schofield, Jonathon S.
Schoepp, Katherine R.
Stobbe, Michael
Marasco, Paul D.
Hebert, Jacqueline S.
PROSTHETICS AND ORTHOTICS INTERNATIONAL, 2019, 43 (05) : 564 - 567
[3] Prosthetic sockets fabrication using rapid prototyping technology
Ng, P
Lee, PSV
Goh, JCH
RAPID PROTOTYPING JOURNAL, 2002, 8 (01) : 53 - 59
[4] Automated Technology of Manufacturing the Below Knee Prosthetic Socket
Golovin, Mikhail A.
Fogt, Elizaveta, V
Petrauskas, Marina, V
Kaplun, Dmitrii, I
Sufelfa, Alisa R.
PROCEEDINGS OF THE 2021 IEEE CONFERENCE OF RUSSIAN YOUNG RESEARCHERS IN ELECTRICAL AND ELECTRONIC ENGINEERING (ELCONRUS), 2021, : 1752 - 1755
[5] Preliminary Material Evaluation of Flax Fibers for Prosthetic Socket Fabrication
Monette, Dominic
Dumond, Patrick
Chikhaoui, Ines
Nichols, Paul
Lemaire, Edward D.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 2021, 143 (02):
[6] Fabrication of a flexible inner prosthetic socket via the FGM technique
Al-Araji, Inas Zaki Hadi
Satgunam, Meenaloshini A. P.
Abd Manap, Abreeza Noorlina Bt
Resan, Kadhim K.
Muhammad, Ahmed K.
PIGMENT & RESIN TECHNOLOGY, 2024,
[7] A smartphone photogrammetry method for digitizing prosthetic socket interiors
Hernandez, Amaia
Lemaire, Edward
PROSTHETICS AND ORTHOTICS INTERNATIONAL, 2017, 41 (02) : 210 - 214
[8] Variable stiffness and shape prosthetic socket based on layer jamming technology
Paterno, L.
Ibrahimi, M.
Gruppioni, E.
Menciassi, A.
2022 IEEE 5TH INTERNATIONAL CONFERENCE ON SOFT ROBOTICS (ROBOSOFT), 2022, : 729 - 734
[9] Using magnetic panels to enlarge a transtibial prosthetic socket
Coburn, Kendrick A.
DeGrasse, Nicholas S.
Allyn, Katheryn J.
Larsen, Brian G.
Garbini, Joseph L.
Sanders, Joan E.
MEDICAL ENGINEERING & PHYSICS, 2022, 110
[10] A review paper on rapid prototyping and rapid tooling techniques for fabrication of prosthetic socket
Aherwar, Amit
Singh, Amit
Patnaik, Amar
HIGH VALUE MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2014, : 345 - 353

← 1 2 3 4 5 →