Machining of NiTi based shape memory alloys

被引：205
|
作者：
Weinert, K [1 ]
Petzoldt, V [1 ]
机构：
[1] Univ Dortmund, Dept Machining Technol, ISF, D-44227 Dortmund, Germany
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2004年 / 378卷 / 1-2期
关键词：
NiTi; shape memory alloy; machining; turning; drilling; deep hole drilling;
D O I：
10.1016/j.msea.2003.10.344
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The machinability of NiTi based shape memory alloys has been examined. Starting with turning experiments, cutting parameters were varied within a wide range. In addition, the influence of the cooling lubricant concept was investigated. After reaching acceptable results for turning, the field of investigation was extended to the drilling process. Furthermore, first examinations regarding deep hole drilling of tubes from NiTi shape memory alloy were carried out. The machining process was optimised with respect to environmental and commercial aspects with minimal influence on the characteristics of the shape memory alloys. The machining process was evaluated in terms of tool wear, cutting forces and machining quality. The tool wear was analysed with a scanning electron microscope and the influence of the machining on the subsurface zone was investigated by micro hardness measurements. (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码：180 / 184
页数：5
相关论文
共 50 条
  • [31] Elastic fields in NiTi shape memory alloys
    Breczko, T
    Kus, K
    FOURTH INTERNATIONAL WORKSHOP ON NONDESTRUCTIVE TESTING AND COMPUTER SIMULATIONS IN SCIENCE AND ENGINEERING, 2001, 4348 : 178 - 184
  • [32] Electrolytic processing of NiTi shape memory alloys
    Pohl, M
    Hessing, C
    Frenzel, J
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2002, 53 (09): : 673 - 679
  • [33] Characterization of NiTi and CuAlNi shape memory alloys
    Kneissl, AC
    Scherngell, H
    Schnabl, A
    ANALYSIS OF IN-SERVICE FAILURES AND ADVANCES IN MICROSTRUCTURAL CHARACTERIZATION, 1999, 26 : 441 - 446
  • [34] Engineering applications of NiTi shape memory alloys
    Predki, Wolfgang
    Knopik, Adam
    Bauer, Bjoern
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 481 (598-601): : 598 - 601
  • [35] Laser-Machining of Microchannels in NiTi-Based Shape-Memory Alloys: Experimental Analysis and Process Optimization
    Mohammed, Muneer Khan
    Al-Ahmari, Abdulrahman
    MATERIALS, 2020, 13 (13)
  • [36] Intelligent Machining of Shape Memory Alloys
    Gupta, Kapil
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2021, 15 (03) : 43 - 53
  • [37] An Experimental Investigation on Training of NiTi-Based Shape Memory Alloys
    Ansari, Mehdi
    Fahimi, Pouya
    Baghani, Mostafa
    Golzar, Mohammad
    INTERNATIONAL JOURNAL OF APPLIED MECHANICS, 2018, 10 (04)
  • [38] THE MECHANICAL-PROPERTIES OF NITI-BASED SHAPE MEMORY ALLOYS
    MELTON, KN
    MERCIER, O
    ACTA METALLURGICA, 1981, 29 (02): : 393 - 398
  • [39] Surface integrity aspects for NiTi shape memory alloys during wire electric discharge machining: A review
    Bisaria, Himanshu
    Shandilya, Pragya
    JOURNAL OF MATERIALS RESEARCH, 2020, 35 (06) : 537 - 558
  • [40] Challenges in using waterjet machining of NiTi shape memory alloys: An analysis of controlled-depth milling
    Kong, M. C.
    Axinte, D.
    Voice, W.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (06) : 959 - 971
12345