Machining of NiTi based shape memory alloys

被引：205
|
作者：
Weinert, K [1 ]
Petzoldt, V [1 ]
机构：
[1] Univ Dortmund, Dept Machining Technol, ISF, D-44227 Dortmund, Germany
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2004年 / 378卷 / 1-2期
关键词：
NiTi; shape memory alloy; machining; turning; drilling; deep hole drilling;
D O I：
10.1016/j.msea.2003.10.344
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The machinability of NiTi based shape memory alloys has been examined. Starting with turning experiments, cutting parameters were varied within a wide range. In addition, the influence of the cooling lubricant concept was investigated. After reaching acceptable results for turning, the field of investigation was extended to the drilling process. Furthermore, first examinations regarding deep hole drilling of tubes from NiTi shape memory alloy were carried out. The machining process was optimised with respect to environmental and commercial aspects with minimal influence on the characteristics of the shape memory alloys. The machining process was evaluated in terms of tool wear, cutting forces and machining quality. The tool wear was analysed with a scanning electron microscope and the influence of the machining on the subsurface zone was investigated by micro hardness measurements. (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码：180 / 184
页数：5
相关论文
共 50 条
  • [11] Spherical indentation of NiTi-based shape memory alloys
    Li, Peizhen
    Karaca, Haluk E.
    Cheng, Yang-Tse
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 651 : 724 - 730
  • [12] MEMS applications of NiTi based shape memory alloys: A review
    Mehrpouya M.
    Bidsorkhi H.C.
    Micro and Nanosystems, 2016, 8 (02) : 79 - 91
  • [13] Fracture control parameters for NiTi based shape memory alloys
    Maletta, Carmine
    Furgiuele, Franco
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2011, 48 (11-12) : 1658 - 1664
  • [14] Spherical indentation of NiTi-based shape memory alloys
    20153601237831
    Karaca, Haluk E. (karacahaluk@uky.edu), 1600, Elsevier Ltd (651):
  • [15] The triple-shape memory effect in NiTi shape memory alloys
    Tang, C.
    Huang, W. M.
    Wang, C. C.
    Purnawali, H.
    SMART MATERIALS AND STRUCTURES, 2012, 21 (08)
  • [16] Experimental Investigations into Electro Discharge Machining of NiTi Shape Memory Alloys using Rotational Tool
    Daneshmand, Saeed
    Kahrizi, Ehsan Farahmand
    Neyestanak, Ali Akbar Lotfi
    Ghahi, Mehrdad Mortazavi
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2013, 8 (06): : 7484 - 7497
  • [17] Surface integrity characteristics of NiTi shape memory alloys resulting from dry and cryogenic machining
    Kaynak, Y.
    Karaca, E.
    Jawahir, I. S.
    2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2014, 13 : 393 - 398
  • [18] Effect of Deep Cryogenic Treatment on Machinability of NiTi Shape Memory Alloys in Electro Discharge Machining
    Jatti, Vijaykumar S.
    Singh, T. P.
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 197 - +
  • [19] Progress In The Understanding Of NiTi Shape Memory Alloys
    Bhaumik, S. K.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2008, 61 (05) : 435 - 445
  • [20] Electrolytic processing of NiTi shape memory alloys
    Pohl, M.
    Heßing, Ch.
    Frenzel, J.
    Materials and Corrosion, 2002, 53 (09) : 673 - 679
12345