J-integral and plastic limit load of hole-edge crack in plate under biaxial loadings

被引：0
|
作者：
Zhang Yan-qing [1 ]
Wang Zhong-xian [1 ]
Xu Wei [1 ]
机构：
[1] Jiangsu Univ, Fac Civil Engn & Mech, Zhenjiang 212013, Jiangsu, Peoples R China
来源：
CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING III, PTS 1-3 | 2014年 / 881-883卷
关键词：
Hole-edge crack; elastic-plastic J-integral; Biaxial loading; Plastic limit load; SEMIELLIPTIC SURFACE CRACKS;
D O I：
10.4028/www.scientific.net/AMR.881.883.1412
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Elastic-plastic J-integral and plastic limit load were described by finite element (FE) analysis for single hole-edge crack in plate under far field biaxial load. In this paper, the effect of biaxial load ratio (from -1 to 1) on elastic-plastic J-integral and plastic limit load was studied, the values of coefficient h(1) for J-integral engineering estimation formulas were given and the effect of material hardening on plastic limit load was discussed. The result obtained from this work provides reference for fracture evaluation, so it can be used in engineering accurately and expediently.
引用
收藏
页码：1412 / 1415
页数：4
相关论文
共 50 条
  • [21] Numerical Estimation of Plastic J-Integral by the Load Separation Method for Inclined Cracks Under Tension
    Matvienko, Yu G.
    Muravin, E. L.
    INTERNATIONAL JOURNAL OF FRACTURE, 2011, 168 (02) : 251 - 257
  • [22] Numerical Estimation of Plastic J-Integral by the Load Separation Method for Inclined Cracks Under Tension
    Yu. G. Matvienko
    E. L. Muravin
    International Journal of Fracture, 2011, 168 : 251 - 257
  • [23] An investigation of T-stresses in a plate with an inclined crack under biaxial loadings
    Miao, X. -T.
    Zhou, C. -Y
    Lv, F.
    Li, J.
    He, X. -H.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2017, 40 (03) : 435 - 447
  • [24] Mis-Match Limit Load Analyses and Approximate J-Integral Estimates for Similar Metal Weld with Weld-Center Crack Under Tension Load
    Song, Tae-Kwang
    Kim, Yun-Jae
    Kim, Jong-Sung
    Jin, Tae-Eun
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2008, 32 (05) : 411 - 418
  • [25] J-Integral Analysis of Surface Cracks in Round Bars under Combined Loadings
    Ismail, A. E.
    Ariffin, A. K.
    Abdullah, S.
    Ghazali, M. J.
    Daud, R.
    ADVANCES IN KEY ENGINEERING MATERIALS, 2011, 214 : 187 - +
  • [26] J-Integral Analysis of Surface Cracks in Round Bars under Tension Loadings
    Ismail, A. E.
    Ariffin, A. K.
    Abdullah, S.
    Ghazali, M. J.
    Daud, R.
    AbdulRazzaq, M.
    Zulkifli, A.
    ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 37 - +
  • [27] Effect of local plastic component on crack opening displacement and on J-integral of a circumferential penetrated crack
    Machida, Hideo
    Arakawa, Manabu
    Wakai, Takashi
    MECHANICAL ENGINEERING JOURNAL, 2020, 7 (03):
  • [28] Effect of local plastic component on crack opening displacement and on J-integral of a circumferential penetrated crack
    Machida, Hideo H.
    Arakawa, Manabu
    Wakai, Takashi
    International Conference on Nuclear Engineering, Proceedings, ICONE, 2019, 2019-May
  • [29] J-integral and limit load analysis of semi-elliptical surface cracks in plates under tension
    Lei, Y
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2004, 81 (01) : 21 - 30
  • [30] J-integral and limit load analysis of semi-elliptical surface cracks in plates under bending
    Lei, Y
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2004, 81 (01) : 31 - 41
12345