Characteristics of 2024/3003 aluminium alloys bimetal prepared by direct chill casting

被引：2
|
作者：
Liu, N. [1 ]
Song, X. Y. [2 ]
Jie, J. C. [1 ]
Fu, Y. [1 ]
Li, T. J. [1 ]
机构：
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China
[2] China First Heavy Ind, Mat Res Inst Energy Equipments, Tianjin 300457, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2014年 / 30卷 / 11期
基金：
中国博士后科学基金; 中国国家自然科学基金;
关键词：
Clad slab; Direct chill casting; Aluminium alloy; Interface; MECHANICAL-PROPERTIES; PLASTIC-DEFORMATION; COMPOSITE INGOT; CLAD INGOT; MICROSTRUCTURE; HARDNESS; SHEET;
D O I：
10.1179/1743284713Y.0000000445
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A direct chill semicontinuous casting process to prepare 2024/3003 clad slab has been developed in the present study. Microstructure, solute distribution and bonding strength of the interfacial regions of clad slab were investigated by methods of metallographic examination, electron probe microanalysis and tensile tests. The results show that an excellent metallurgical bonding between the two different alloys can be achieved with optimal parameters. The 3003 alloy, which was poured into the mould earlier, serves as the substrate of heterogeneous nucleation of 2024 alloy. The Cu and Mg atoms diffuse from the 2024 side into the matrix of 3003 side, while Mn atoms diffuse in the opposite direction. The mean tensile strength of clad slab is 118 MPa, and the strength of the interface is higher than that of 3003 alloy.
引用
收藏
页码：1354 / 1358
页数：5
相关论文
共 50 条
  • [31] Surface Structure Formation in Direct Chill (DC) Casting of Al Alloys
    Nazlin Bayat
    Torbjörn Carlberg
    [J]. JOM, 2014, 66 : 700 - 710
  • [32] Mould thermal analysis in direct-chill casting of magnesium alloys
    Sediako, Dimitry
    MacDonald, William
    Hibbins, Stephen
    [J]. MAGNESIUM TECHNOLOGY 2008, 2008, : 215 - +
  • [33] Modeling of ingot distortions during direct chill casting of aluminum alloys
    Drezet, JM
    Rappaz, M
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (10): : 3214 - 3225
  • [34] Dilatometric study of the anisotropy of an aluminium alloy obtained by the "Direct Chill Casting" method.
    Hamamda, S
    Boubertakh, A
    Benabdoun, M
    Guemini, R
    [J]. ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2000, 25 (05): : 401 - 409
  • [35] Melt Conditioned Direct Chill (MC-DC) Casting of Al Alloys
    S. Jones
    A. K. Prasada Rao
    Z. Fan
    [J]. Transactions of the Indian Institute of Metals, 2013, 66 : 117 - 121
  • [36] Scale rules for macrosegregation during direct-chill casting of aluminum alloys
    Eskin, Dmitry G.
    Du, Qiang
    Katgerman, Laurens
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (05): : 1206 - 1212
  • [37] Macrosegregation Induced by Floating Grains in Direct-Chill Casting of Aluminum Alloys
    Dong, Qipeng
    Xia, Jun
    Chen, Xiaming
    Li, Xinzhong
    Zhang, Bo
    Nagaumi, Hiromi
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2021, 52 (04): : 1930 - 1936
  • [38] Modeling Macrosegregation during Direct-Chill Casting of Multicomponent Aluminum Alloys
    Q. Du
    D.G. Eskin
    L. Katgerman
    [J]. Metallurgical and Materials Transactions A, 2007, 38 : 180 - 189
  • [39] Effects of Casting Parameters on Macrosegregation in 2024 Alloy During Direct-chill Casting Based on Numerical Simulation
    Luo, Haijun
    Jie, Wanqi
    Gao, Zhiming
    Zheng, Yongjian
    [J]. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2019, 48 (09): : 2759 - 2767
  • [40] Effects of Casting Parameters on Macrosegregation in 2024 Alloy During Direct-chill Casting Based on Numerical Simulation
    Luo Haijun
    Jie Wanqi
    Gao Zhiming
    Zheng Yongjian
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (09) : 2759 - 2767
12345