Modeling of ingot distortions during direct chill casting of aluminum alloys

被引：103
|
作者：
Drezet, JM
Rappaz, M
机构：
[1] Laboratoire de Metallurgie Physique, Ecole Polytechnique Federale de Lausanne
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 1996年 / 27卷 / 10期
关键词：
D O I：
10.1007/BF02663872
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A comprehensive three-dimensional (3-D) mathematical model based upon the ABAQUS software has been developed for the computation of the thermomechanical state of the solidifying strand during direct chill (DC) casting of rolling sheet ingots and during subsequent cooling. Based upon a finite-element formulation, the model determines the temperature distribution, the stresses, and the associated deformations in the metal. For that purpose, the thermomechanical properties of the alloy have been measured up to the coherency temperature using creep and indentation tests. The thermophysical properties as well as the boundary conditions associated with the lateral water spray have been determined using inverse modeling. The predicted ingot distortions, mainly, ''butt curl,'' ''butt swell,'' and lateral faces pull-in, are compared with experimental measurements performed during solidification and after complete cooling of the ingot. particular emphasis is placed on the nonuniform contraction of the lateral faces, The influence of the mold shape and the contributions to this contraction are assessed as a function of the casting conditions.
引用
收藏
页码：3214 / 3225
页数：12
相关论文
共 50 条
  • [1] Modeling of ingot distortions during direct chill casting of aluminum alloys
    Ecole Polytechnique Federale de, Laussane, Laussane, Switzerland
    [J]. Metall Mat Trans A Phys Metall Mat Sci, 10 (3214-3225):
  • [2] Direct chill casting of aluminum alloys: Ingot distortions and mold design optimization
    Drezet, JM
    Rappaz, M
    [J]. LIGHT METALS 1997, 1997, : 1071 - 1080
  • [3] Hot tearing in direct chill casting ingot of 7000 series aluminum alloys
    Sakaguchi, Nobuhito
    [J]. Keikinzoku/Journal of Japan Institute of Light Metals, 2015, 65 (10): : 492 - 497
  • [4] Modeling Macrosegregation during Direct-Chill Casting of Multicomponent Aluminum Alloys
    Q. Du
    D.G. Eskin
    L. Katgerman
    [J]. Metallurgical and Materials Transactions A, 2007, 38 : 180 - 189
  • [5] Modeling macrosegregation during direct-chill casting of multicomponent aluminum alloys
    Du, Q.
    Eskin, D. G.
    Katgerman, L.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2007, 38A (01): : 180 - 189
  • [6] Direct chill casting of CLAD ingot
    Wagstaff, Robert B.
    Lloyd, D. J.
    Bischoff, Todd F.
    [J]. ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 1809 - 1814
  • [7] Modeling of ingot development during the start-up phase of direct chill casting
    Williams, AJ
    Croft, TN
    Cross, M
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2003, 34 (05): : 727 - 734
  • [8] Modeling of ingot development during the start-up phase of direct chill casting
    A. J. Williams
    T. N. Croft
    M. Cross
    [J]. Metallurgical and Materials Transactions B, 2003, 34 : 727 - 734
  • [9] Direct chill casting of aluminum alloys: Modeling and experiments on industrial scale ingots
    Vreeman, CJ
    Schloz, JD
    Krane, MJM
    [J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2002, 124 (05): : 947 - 953
  • [10] Scale rules for macrosegregation during direct-chill casting of aluminum alloys
    Eskin, Dmitry G.
    Du, Qiang
    Katgerman, Laurens
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (05): : 1206 - 1212
12345