Low cycle fatigue of T-tubular joints with in-plane bending loading

被引：0

作者：

Waallen, Jorn ^{[1
]}

Berge, Stig ^{[1
]}

机构：

[1] Norwegian Univ Sci & Technol, N-7034 Trondheim, Norway

来源：

Proceedings of the 24th International Conference on Offshore Mechanics and Arctic Engineering, Vol 3 | 2005年

关键词：

D O I：

暂无

中图分类号：

P75 [海洋工程];

学科分类号：

0814 ; 081505 ; 0824 ; 082401 ;

摘要：

Tubular T-joints were fatigue tested with in-plane bending loading. Six models were tested, three models with R-ratio of 0 and three with R = -1. Hot spot stress was measured for the brace and for the chord using the ECSC linear extrapolation procedure. Fatigue loading was applied in load control, to obtain through thickness cracking at a number of cycles in the range 3 000 - 64 000 cycles. The data were analysed and compared with the current fatigue design criteria for tubular joints.

引用

页码：211 / 219

页数：9

共 50 条

[41] Fatigue behavior of very high strength (VHS) circular steel tube to plate T-joints under in-plane bending
Jiao, Hui
Mashiri, Fidelis
Zhao, Xiao-Ling
THIN-WALLED STRUCTURES, 2013, 68 : 106 - 112
[42] Reinforced concrete members subjected to bending and in-plane loading
Polak, MA
Blackwell, KG
ACI STRUCTURAL JOURNAL, 1998, 95 (06) : 740 - 748
[43] Square hollow section (SHS) T-joints with concrete-filled chords subjected to in-plane fatigue loading in the brace
Mashiri, Fidelis Rutendo
Zhao, Xiao-Ling
THIN-WALLED STRUCTURES, 2010, 48 (02) : 150 - 158
[44] Experimental study on SCFs of welded CHS-to-concrete filled CHS T-joints under axial loading and in-plane bending
Shi, W. Z.
TUBULAR STRUCTURES XII, 2009, : 469 - 476
[45] Equilibrium of bolted joints subjected to in-plane external loading
Mathstat Ltd, Sunbury, United States
J Aircr, 5 (1124-1129):
[46] A toughness based deformation limit for fatigue-cracked X-joints under in-plane bending
Ahmed, Aziz
Qian, Xudong
MARINE STRUCTURES, 2015, 42 : 33 - 52
[47] Thin circular hollow section-to-plate T-joints: Stress concentration factors and fatigue failure under in-plane bending
Mashiri, FR
Zhao, XL
THIN-WALLED STRUCTURES, 2006, 44 (02) : 159 - 169
[48] Degree of bending (DoB) in jack-up unit tubular KK-joints under the axial, in-plane bending (IPB), and out-of-plane bending (OPB) loads
Gao, Jie
Duan, Menglan
Yuan, Ye
SHIPS AND OFFSHORE STRUCTURES, 2023, 18 (05) : 645 - 659
[49] Stress concentration factors of multi-planar tubular KT-joints subjected to in-plane bending moments
Zavvar, E.
Hectors, K.
De Waele, W.
MARINE STRUCTURES, 2021, 78 (78)
[50] Load levels for high-cycle fatigue response in welded thin cold-formed square hollow section (SHS) T-joints under in-plane bending
Mashiri, E
Zhao, XL
Grundy, P
ADVANCES IN STRUCTURES, VOLS 1 AND 2, 2003, : 131 - 136

← 1 2 3 4 5 →