Low cycle fatigue of T-tubular joints with in-plane bending loading

被引：0

作者：

Waallen, Jorn ^{[1
]}

Berge, Stig ^{[1
]}

机构：

[1] Norwegian Univ Sci & Technol, N-7034 Trondheim, Norway

来源：

Proceedings of the 24th International Conference on Offshore Mechanics and Arctic Engineering, Vol 3 | 2005年

关键词：

D O I：

暂无

中图分类号：

P75 [海洋工程];

学科分类号：

0814 ; 081505 ; 0824 ; 082401 ;

摘要：

Tubular T-joints were fatigue tested with in-plane bending loading. Six models were tested, three models with R-ratio of 0 and three with R = -1. Hot spot stress was measured for the brace and for the chord using the ECSC linear extrapolation procedure. Fatigue loading was applied in load control, to obtain through thickness cracking at a number of cycles in the range 3 000 - 64 000 cycles. The data were analysed and compared with the current fatigue design criteria for tubular joints.

引用

页码：211 / 219

页数：9

共 50 条

[31] The static behaviour of multiplanar tubular XX-joints loaded by in-plane bending moments on the in-plane and axial forces on the out-of-plane braces
vanderVegte, GJ
Wardenier, J
PROCEEDINGS OF THE SIXTH (1996) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL IV, 1996, 1996, : 94 - 100
[32] Parametric study and equations of the maximum SCF for concrete filled steel tubular T-joints under in-plane and out-of-plane bending
Musa, Idris A.
Mashiri, Fidelis R.
THIN-WALLED STRUCTURES, 2019, 135 : 245 - 268
[33] Effect of chord axial stresses on the static strength of cracked tubular T/Y-joints under out-of-plane and in-plane bending
Li, Tao
Lie, Seng-Tjhen
Cong, Peiwen
ADVANCES IN STRUCTURAL ENGINEERING, 2019, 22 (07) : 1698 - 1710
[34] Degree of bending (DoB) in offshore tubular KT-joints under the axial, in-plane bending (IPB), and out-of-plane bending (OPB) loads
Ahmadi, Hamid
Zavvar, Esmaeil
APPLIED OCEAN RESEARCH, 2020, 95
[35] Study on bearing capacity of circular tubular t-joints with collar-plate reinforcement loaded by in-plane bending load
1600, Editorial office of Ship Building of China, China (55):
[36] Analysis of Stress Concentration Factors due to in-Plane Bending and out-of-Plane Bending Loads on Tubular TY-Joints of Offshore Structures
Sambo, Mohamadou Aminou
Kol, Guy Richard
Betchewe, Gambo
JOURNAL OF MARINE SCIENCE AND APPLICATION, 2022, 21 (04) : 78 - 94
[37] Analysis of Stress Concentration Factors due to in-Plane Bending and out-of-Plane Bending Loads on Tubular TY-Joints of Offshore Structures
Mohamadou Aminou Sambo
Guy Richard Kol
Gambo Betchewe
Journal of Marine Science and Application, 2022, 21 : 78 - 94
[38] Nanoscopic t-tubular deformation during cardiac mechanical cycle
Rog-Zielinska, Eva
Kohl, Peter
EUROPEAN BIOPHYSICS JOURNAL WITH BIOPHYSICS LETTERS, 2021, 50 (SUPPL 1): : 45 - 45
[39] On the static strength of tubular T and Y joints under combined bending and axial loading
Fessler, H
Hyde, TH
Khalid, YA
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 1996, 116 (01) : 29 - 43
[40] Fatigue behaviour of welded thin cold-formed CHS-CHS T-joints under in-plane bending
Mashiri, FR
Zhao, XL
Grundy, P
TUBULAR STRUCTURES X, 2003, : 311 - 319

← 1 2 3 4 5 →