Experimental Study of Surface Roughness of Wood Plastic Composites after Turning

被引：13

作者：

Hutyrova, Zuzana ^{[1
]}

Harnicarova, Marta ^{[2
,3
]}

Zajac, Jozef

Valicek, Jan ^{[2
,4
]}

Mihok, Jozef ^{[5
]}

机构：

[1] Tech Univ Kosice Seat Presov, Fac Mfg Technol, Sturova 31, Presov 08001, Slovakia

[2] Tech Univ Ostrava, Inst Phys, Fac Min & Geol, Ostrava 70833, Czech Republic

[3] VSB Tech Univ Ostrava, Nanotechnol Ctr, Ostrava 70833, Czech Republic

[4] VSB Tech Univ Ostrava, Fac Met & Mat Engn, Ostrava 70833, Czech Republic

[5] Tech Univ Kosice, Fac Mech Engn, Kace 04200, Slovakia

来源：

MATERIAL SCIENCE AND ENGINEERING TECHNOLOGY II | 2014年 / 856卷

关键词：

surface roughness; turning; wood-plastic composite;

D O I：

10.4028/www.scientific.net/AMR.856.108

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, surface characteristics of the samples of experimentally manufactured wood plastic composites (WPC) were determined. Turning process was used to produce surfaces by removing material from a rotating workpiece. For turning, the rotation speed, feed, and depth of cut determine the rate of material removal and resulting surface quality. The surface roughness is one of the most important factor affecting coating performance of the WPCs. Parameters of surface roughness (final micro-geometric characteristics - Ra, Rz) of the samples was determined using a stylus-type profilometer Surftest SJ 401. This information will provide baseline data on the quality of WPC samples after turning.

引用

页码：108 / +

页数：2

共 50 条

[21] Surface Roughness and Chip Morphology of Wood-plastic Composites Manufactured via High-speed Milling
Wei, Weihua
Cong, Rui
Xue, Tongming
Abraham, Ayodele Daniel
Yang, Changyong
[J]. BIORESOURCES, 2021, 16 (03) : 5733 - 5745
[22] Effect of raw material composition of wood plastic composites on surface roughness parameters evaluated with a robust filtering method
Gurau, Lidia
Ayrilmis, Nadir
[J]. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2019, 32 (04) : 427 - 441
[23] Experimental Study of Surface Roughness of Pine Wood by High-Speed Milling
Yang, Chunmei
Ma, Yaqiang
Liu, Tongbin
Ding, Yucheng
Qu, Wen
[J]. FORESTS, 2023, 14 (06):
[24] An experimental study on the effect of tool geometry on tool wear and surface roughness in hard turning
Pham Minh Duc
Le Hieu Giang
Mai Duc Dai
Do Tien Sy
[J]. ADVANCES IN MECHANICAL ENGINEERING, 2020, 12 (09)
[25] Theoretical and Experimental Study on the Surface Roughness of Quenched Steel in Ultrasonic Turning with PCBN Tool
Jiao, Feng
Jian, Jinhui
Liu, Xiang
[J]. HISTORY OF MECHANICAL TECHNOLOGY AND MECHANICAL DESIGN, 2011, 42 : 1 - 4
[26] Analytical and Experimental Determination of the Ra Surface Roughness during Turning
Stahl, J-E.
Schultheiss, F.
Hagglund, S.
[J]. 1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
[27] Experimental Investigation of Surface Roughness in Electrical Discharge Turning Process
Gohil, Vikas
Puri, Y. M.
[J]. PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 2016, 1769
[28] Effect of Machining Parameters on the Surface Roughness while Turning Particulate Composites
Rao, Prakash C. R.
Bhagyashekar, M. S.
Narendraviswanath
[J]. 12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 421 - 431
[29] Turning particulate metal matrix composites: experimental study of the evolution of the cutting forces, tool wear and workpiece surface roughness with the cutting time
Davim, JP
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2001, 215 (03) : 371 - 376
[30] Roughness Level Analysis of the Surface of Plastic Material from Turning Machinery Process
Haris, Oscar
Koesmawan
Usman, R.
Mawardi, I.
Sugara, Ria Dewi Hudayani
Cebro, Irwin Syahri
Sitorus, Agustami
[J]. 2017 INTERNATIONAL CONFERENCE ON COMPUTING, ENGINEERING, AND DESIGN (ICCED), 2017,

← 1 2 3 4 5 →