Turning particulate metal matrix composites: experimental study of the evolution of the cutting forces, tool wear and workpiece surface roughness with the cutting time

被引：28
|
作者：
Davim, JP [1 ]
机构：
[1] Univ Aveiro, Dept Mech Engn, P-3810193 Aveiro, Portugal
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2001年 / 215卷 / 03期
关键词：
turning; particulate metal matrix composites; polycrystalline diamond; tool wear; cutting forces; surface roughness;
D O I：
10.1243/0954405011515433
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an experimental study of the evolution of the cutting forces, tool wear and surface roughness during the turning of the particulate metal matrix composite A356/20/SiCp-T6. The experimental work was developed through the continuous measurement of the cutting forces with an appropriate piezoelectric dynamometer. The wear type was identified and its evolution with cutting time was measured. Inserts with polycrystalline diamond (PCD) were tested. The surface roughness was evaluated with a profilometer.
引用
收藏
页码：371 / 376
页数：6
相关论文
共 50 条
  • [1] Influence of sustainable cutting environments on cutting forces, surface roughness and tool wear in turning of Inconel 718
    Mehta, A.
    Hemakumar, S.
    Patil, A.
    Khandke, S. P.
    Kuppan, P.
    Oyyaravelu, R.
    Balan, A. S. S.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 6746 - 6754
  • [2] Experimental investigation on surface roughness, tool wear and cutting force in turning of hybrid (Al7075+SiC + Gr) metal matrix composites
    Kannan, A.
    Mohan, R.
    Viswanathan, R.
    Sivashankar, N.
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (06): : 16529 - 16540
  • [3] Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool
    Khamel, Samir
    Ouelaa, Nouredine
    Bouacha, Khaider
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (11) : 3605 - 3616
  • [4] Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool
    Samir Khamel
    Nouredine Ouelaa
    Khaider Bouacha
    [J]. Journal of Mechanical Science and Technology, 2012, 26 : 3605 - 3616
  • [5] Tool wear acceleration in relation to workpiece reinforcement percentage in cutting of metal matrix composites
    Li, XP
    Seah, WKH
    [J]. WEAR, 2001, 247 (02) : 161 - 171
  • [6] Experimental Investigations to Study the Cutting Force and Surface Roughness during Turning of Aluminium Metal Matrix Hybrid Composites
    Kumar, Siddesh N. G.
    Shankar, G. S. Shiva
    Ganesh, M. N.
    Vibudha, L. K.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2017, 4 (09) : 9371 - 9374
  • [7] The Effect of Cutting Tool Wear Behaviors on Feed Rates in Turning of Metal Matrix Composites
    Pul, Muharrem
    Seker, Ulvi
    [J]. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2014, 17 (03): : 99 - 106
  • [8] Influence of emulsifier content in cutting fluids on cutting forces, cutting temperatures, tool wear, and surface roughness
    Srikant, R. R.
    Rao, D. Nageswara
    Rao, P. N.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2009, 223 (J2) : 203 - 209
  • [9] Turning of aluminum metal matrix composites: influence of the reinforcement and the cutting condition on the surface layer of the workpiece
    Jan C. Aurich
    Marco Zimmermann
    Stefan Schindler
    Paul Steinmann
    [J]. Advances in Manufacturing, 2016, 4 : 225 - 236
  • [10] Turning of aluminum metal matrix composites: influence of the reinforcement and the cutting condition on the surface layer of the workpiece
    Aurich, Jan C.
    Zimmermann, Marco
    Schindler, Stefan
    Steinmann, Paul
    [J]. ADVANCES IN MANUFACTURING, 2016, 4 (03) : 225 - 236
12345