Complex Tooling for Hot Embossing and Injection Molding

被引：2
|
作者：
Stuck, A. [1 ]
Pugin, R. [1 ]
Schnieper, M. [1 ]
Zhurminsky, I. [1 ]
Luu-Dinh, A. [1 ]
Walter, H. [1 ]
机构：
[1] Ctr Suisse Elect & Microtech SA, Neuchatel, Switzerland
来源：
PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MULTI-MATERIAL MICRO MANUFACTURE (4M 2010) | 2011年
关键词：
D O I：
10.3850/978-981-08-65559_IN-002
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Combining Holographic and e-beam origination with UV-lithography allows to manufacture tools which contain in the same tool geometrical features of a few 10nm's, over a few 100nm's and microns with macroscopic, sub-mm features. The total achievable accuracies for the relative positioning of all these structures is in the range of micrometers. Using electroformed Ni it is possible to transfer all these geometries through hot embossing or injection molding into plastic parts with great accuracy. Examples of combinations of sub 100nm structures with sub micron structures and of sub micron structures with sub-mm features are discussed.
引用
收藏
页码：3 / 8
页数：6
相关论文
共 50 条
  • [1] Production of micro-molding tooling by hot embossing
    Dirckx, Matthew
    Mazzeo, Aaron D.
    Hardt, David E.
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND ENGINEERING - 2007, 2007, : 141 - 149
  • [2] Hot embossing and injection molding for microoptical components
    Heckele, M
    Bacher, W
    Hanemann, T
    Ulrich, H
    [J]. PRECISION PLASTIC OPTICS FOR OPTICAL STORAGE, DISPLAYS, IMAGING, AND COMMUNICATIONS, 1997, 3135 : 24 - 29
  • [3] Microfabrication by hot embossing and injection molding at LASTI
    Mekaru, H
    Yamada, T
    Yan, S
    Hattori, T
    [J]. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2004, 10 (10): : 682 - 688
  • [4] Microfabrication by hot embossing and injection molding at LASTI
    H. Mekaru
    T. Yamada
    S. Yan
    T. Hattori
    [J]. Microsystem Technologies, 2004, 10 : 682 - 688
  • [5] Nanoreplication in polymers using hot embossing and injection molding
    Schift, H
    David, C
    Gabriel, M
    Gobrecht, J
    Heyderman, LJ
    Kaiser, W
    Köppel, S
    Scandella, L
    [J]. MICROELECTRONIC ENGINEERING, 2000, 53 (1-4) : 171 - 174
  • [6] Parametric study of injection molding and hot embossing in polymer microfabrication
    Wu, Cheng-Hsien
    Ku, Hsien-Chang
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2007, 21 (10) : 1477 - 1482
  • [7] Parametric study of injection molding and hot embossing in polymer microfabrication
    Cheng -Hsien Wu
    Hsien -Chang Kuo
    [J]. Journal of Mechanical Science and Technology, 2007, 21 : 1477 - 1482
  • [8] TOOLING FOR INJECTION MOLDING Additive Bridge Tooling for Injection Molding of High Performance Materials
    Detjen, Soenke
    Kaysser, Simon T.
    Keun, Christian-Andre
    [J]. SAMPE JOURNAL, 2023, 59 (01) : 34 - 40
  • [9] LAMINATE TOOLING FOR INJECTION-MOLDING
    GLOZER, GR
    BREVICK, JR
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 1993, 207 (01) : 9 - 14
  • [10] Tooling project management of injection molding
    Yue, M
    [J]. ANTEC 2000: SOCIETY OF PLASTICS ENGINEERS TECHNICAL PAPERS, CONFERENCE PROCEEDINGS, VOLS I-III, 2000, : 907 - 910
12345