Structure of 3D Printed Ti-6Al-4V Alloy after Low-frequency Processing

被引：0
|
作者：
Kazantseva, N. [1 ,2 ,3 ]
Rumyantsev, S. [3 ]
Merkushev, A. [4 ]
Ezhov, I [1 ]
Davydov, D. [1 ]
Vinogradova, N. [1 ]
机构：
[1] Russian Acad Sci, Inst Met Phys, Ekaterinburg, Russia
[2] Ural Fed Univ, Ekaterinburg, Russia
[3] Ural State Univ Railway Transport, Ekaterinburg, Russia
[4] Ural Fed Univ, Reg Engn Ctr Laser & Addit Technol, Ekaterinburg, Russia
来源：
INTERNATIONAL CONFERENCE ON APPLIED PHYSICS, POWER AND MATERIAL SCIENCE | 2019年 / 1172卷
关键词：
D O I：
10.1088/1742-6596/1172/1/012084
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The structure and residual elastic stresses in 3D printed (Selective laser melting) Ti-6Al-4V samples after the low-frequency vibration processing were investigated. The studied samples were manufactured horizontally in respect to the building platform. Different vibration oscillations modes (vertical, horizontal, and elliptical) were chosen for study. The oscillations were done with frequency of 16 Hz, and a processing time was 20 minutes. Studies shown that 3D printed samples had a high level of residual elastic stresses, which were changed after vibration treatment. The influence of the low-frequency processing on the phase composition of the alloy was found.
引用
收藏
页数：5
相关论文
共 50 条
  • [21] Surface modification of 3 D-printed alloy Ti-6Al-4V by ultrasonic impact treatment
    Voloshko, S. M.
    Mordyuk, B. M.
    Vasylyev, M. O.
    Zakiev, V. I.
    Burmak, A. P.
    Franchik, N. V.
    METALLOPHYSICS AND ADVANCED TECHNOLOGIES, 2023, 45 (02) : 217 - 237
  • [22] High susceptibility of 3D-printed Ti-6Al-4V alloy to hydrogen trapping and embrittlement
    Kacenka, Zdenek
    Roudnicka, Michaela
    Ekrt, Ondrej
    Vojtech, Dalibor
    MATERIALS LETTERS, 2021, 301
  • [23] Bioceramics coating on Ti-6Al-4V alloy by microwave processing
    Siddharthan, A.
    Kumar, T. S. Sampath
    Seshadri, S. K.
    SURFACE ENGINEERING, 2007, 23 (06) : 401 - 405
  • [24] Microstructural features of thermochemical processing in a Ti-6Al-4V alloy
    Fang, TY
    Wang, WH
    MATERIALS CHEMISTRY AND PHYSICS, 1998, 56 (01) : 35 - 47
  • [25] HOT PROCESSING OF CAST AND PM Ti-6Al-4V ALLOY
    Wojtaszek, M.
    Sleboda, T.
    Korpala, G.
    ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (02) : 1115 - 1120
  • [26] THERMOMECHANICAL PROCESSING OF P/M TI-6Al-4V ALLOY
    Wojtaszek, Marek
    Sleboda, Tomasz
    METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2013, : 364 - 369
  • [27] Structure and mechanical properties of Ti-6Al-4V alloy after zirconium addition
    Jing, R.
    Liang, S. X.
    Liu, C. Y.
    Ma, M. Z.
    Zhang, X. Y.
    Liu, R. P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 552 : 295 - 300
  • [28] Siliconizing of Ti-6Al-4V alloy
    Zhang, Yaming
    Wang, Weilin
    Zhou, Longliang
    Li, Tiefan
    Chen, Chongwei
    Jinshu Rechuli/Heat Treatment of Metals, 1993, (01): : 21 - 24
  • [29] MACHINABILITY OF TI-6AL-4V ALLOY
    NAKAMURA, S
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1648 - 1648
  • [30] Spallation in the alloy Ti-6Al-4V
    Church, PD
    Andrews, T
    Bourne, NK
    Millett, JCF
    SHOCK COMPRESSION OF CONDENSED MATTER-2001, PTS 1 AND 2, PROCEEDINGS, 2002, 620 : 511 - 514
12345