Structure of 3D Printed Ti-6Al-4V Alloy after Low-frequency Processing

被引：0
|
作者：
Kazantseva, N. [1 ,2 ,3 ]
Rumyantsev, S. [3 ]
Merkushev, A. [4 ]
Ezhov, I [1 ]
Davydov, D. [1 ]
Vinogradova, N. [1 ]
机构：
[1] Russian Acad Sci, Inst Met Phys, Ekaterinburg, Russia
[2] Ural Fed Univ, Ekaterinburg, Russia
[3] Ural State Univ Railway Transport, Ekaterinburg, Russia
[4] Ural Fed Univ, Reg Engn Ctr Laser & Addit Technol, Ekaterinburg, Russia
来源：
INTERNATIONAL CONFERENCE ON APPLIED PHYSICS, POWER AND MATERIAL SCIENCE | 2019年 / 1172卷
关键词：
D O I：
10.1088/1742-6596/1172/1/012084
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The structure and residual elastic stresses in 3D printed (Selective laser melting) Ti-6Al-4V samples after the low-frequency vibration processing were investigated. The studied samples were manufactured horizontally in respect to the building platform. Different vibration oscillations modes (vertical, horizontal, and elliptical) were chosen for study. The oscillations were done with frequency of 16 Hz, and a processing time was 20 minutes. Studies shown that 3D printed samples had a high level of residual elastic stresses, which were changed after vibration treatment. The influence of the low-frequency processing on the phase composition of the alloy was found.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Wetting state of 3D printed Ti-6Al-4V alloy surface
    Keles, Omer
    Qadeer, Abdul
    Yilbas, Bekir Sami
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (03) : 2465 - 2475
  • [2] Predicting the Strength of EBAM 3D Printed Ti-6Al-4V from Processing Conditions
    Johnson, Tanya
    Peters, Abbey
    Harlow, D. Gary
    Haden, Christina Viau
    METALS, 2022, 12 (03)
  • [3] Structure and Properties of Alloy Ti-6Al-4V Samples Fabricated by 3D Printing
    Skvortsova, S. V.
    German, M. A.
    Spektor, V. S.
    RUSSIAN METALLURGY, 2019, 2019 (09): : 863 - 872
  • [4] The Microstructural and Phase Evolution of the 3D Printed Ti-6Al-4V Alloy during Mechanical Loading
    Panin, A. V.
    Kazachenok, M. S.
    Kazantseva, L. A.
    Perevalova, O. B.
    Martynov, S. A.
    PHYSICS OF METALS AND METALLOGRAPHY, 2023, 124 (02): : 217 - 223
  • [5] Microstructure and Electrochemical Behavior of a 3D-Printed Ti-6Al-4V Alloy
    Yu, Zhijun
    Chen, Zhuo
    Qu, Dongdong
    Qu, Shoujiang
    Wang, Hao
    Zhao, Fu
    Zhang, Chaoqun
    Feng, Aihan
    Chen, Daolun
    MATERIALS, 2022, 15 (13)
  • [6] STRUCTURE AND PITTING CORROSION OF Ti-6Al-4V ALLOY AND Ti-6Al-4V WELDS
    Ferdinandov, Nikolay Vasilev
    Gospodinov, Danail Dimitrov
    Ilieva, Mariana Dimitrova
    Radev, Rossen Hristov
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND SYSTEMS, 2018, : 325 - 330
  • [7] 3D Finite Element Analysis of Drilling of Ti-6Al-4V Alloy
    Su, Y.
    Chen, D. D.
    Gong, L.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON COMPUTER INFORMATION SYSTEMS AND INDUSTRIAL APPLICATIONS (CISIA 2015), 2015, 18 : 907 - 911
  • [8] Insights into microstructure and mechanical properties of 3D printed Ti-6Al-4V alloy at different layer thicknesses
    Chauhan, Amit Kumar Singh
    Shukla, Mukul
    Kumar, Abhishek
    MATERIALS LETTERS, 2025, 384
  • [9] MICRODUPLEX STRUCTURE IN THE TI-6AL-4V ALLOY
    VIJAYAKAR, SJ
    BANERJEE, S
    KRISHNAN, R
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1978, 31 (5-6): : 302 - &
  • [10] Microstructure and cyclic deformation behavior of a 3D-printed Ti-6Al-4V alloy
    Zhang, Y. L.
    Chen, Z.
    Qu, S. J.
    Feng, A. H.
    Mi, G. B.
    Shen, J.
    Huang, X.
    Chen, D. L.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 825
12345