Positive effect of natural pre-ageing on precipitation hardening in Al-0.44 at% Mg-0.38 at% Si alloy

被引:86
|
作者
Chang, C. S. T. [1 ]
Wieler, I. [1 ]
Wanderka, N. [1 ]
Banhart, J. [1 ]
机构
[1] Helmholtz Ctr Berlin, D-14109 Berlin, Germany
关键词
Al-Mg-Si alloy; Positive strengthening effect; Three-dimensional atom probe; Micro-hardness;
D O I
10.1016/j.ultramic.2008.12.002
中图分类号
TH742 [显微镜];
学科分类号
摘要
Age hardening in a purely ternary Al-Mg-0.4-Si-0.4 (0.44 at% Mg, 0.38at%Si) alloy that is similar to AA6060 was investigated by hardness measurement, TEM and three-dimensional atom probe (3D-AP). In particular, the effect of natural pre-ageing before artificial ageing, which is known to have a positive effect in this alloy, was studied by comparing three different conditions: natural ageing only, artificial ageing for 1.5h at 180 degrees C only and combined natural pre-ageing and subsequent artificial ageing for 1.5h at 180 degrees C. Natural ageing influences the mechanical properties significantly. Naturally aged alloys exhibit a hardening response that is governed by the presence of small clusters. Subsequent artificial ageing of naturally aged specimens increases the value of peak hardness, which is attributed to the increase of the number density of needle-shaped precipitates as compared to the samples without natural ageing. It is assumed that besides these precipitates, the small Si clusters formed at room-temperature storage remain stable during artificial ageing. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:585 / 592
页数:8
相关论文
共 50 条
  • [31] Effect of pre-aging on precipitation hardening in Al-Si-Mg alloys
    Lee, SL
    Tan, YH
    Yie, SN
    Lin, JC
    SCANDINAVIAN JOURNAL OF METALLURGY, 1998, 27 (03) : 112 - 115
  • [32] Enhancing creep formability and comprehensive property in Al-Mg-Si alloy by combinatorial pre-ageing and large pre-deformation
    Chen, Kailiang
    Liu, Chunhui
    Ma, Peipei
    Yang, Jianshi
    Zhan, Lihua
    Huang, Minghui
    Hu, Jianhua
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 826
  • [33] Effect of Li content on ageing precipitation behavior of Al-Mg-Si alloy
    Yang Xiao-kun
    Xiong Bai-qing
    Li Xi-wu
    Yan Li-zhen
    Li Zhi-hui
    Zhang Yong-an
    Li Ya-nan
    Wen Kai
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2021, 49 (06): : 100 - 108
  • [34] MICROPLASTICITY IN A PRECIPITATION HARDENING AL-CU-SI-MG ALLOY
    BONFIELD, W
    DATTA, PK
    JOURNAL OF MATERIALS SCIENCE, 1980, 15 (12) : 3166 - 3168
  • [35] Influence of pre-ageing on the stretch formability of Al-Mg-Si automotive sheet alloys
    Zhong, Hao
    Rometsch, Paul A.
    Wu, Xiaodong
    Cao, Lingfei
    Estrin, Yuri
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 697 : 79 - 85
  • [36] Analyzing Si precipitation on age hardening of an Al-Si-Mg cast alloy
    Wang, Guiqing
    Liu, Yan
    Ren, Guocheng
    Zhao, Zhongkui
    ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 1685 - 1689
  • [37] EFFECT OF THE AGEING TEMPERATURE, AGEING TIME AND QUENCHING TEMPERATURE ON PRECIPITATION KINETICS IN Al-Mg-Si ALLOY
    Lemmadi, Fatima Z.
    Chala, Abdelouahed
    Belahssen, Okba
    Benramache, Said
    ACTA METALLURGICA SLOVACA, 2014, 20 (04): : 375 - 380
  • [38] Effect of Aging Conditions on Precipitation Hardening in Al–Si–Mg and Al–Si–Cu–Mg Alloys
    Mohamed F. Ibrahim
    Agnes M. Samuel
    Herbert W. Doty
    Fawzy H. Samuel
    International Journal of Metalcasting, 2017, 11 : 274 - 286
  • [39] Effect of Sn contents on natural aging and precipitation hardening in Al-Mg-Si alloys
    Weng, Yaoyao
    Xu, Yaqi
    Ding, Lipeng
    Jia, Zhihong
    Zhang, Zongqing
    Chen, Jiahao
    Xie, Maoxuan
    Liu, Qing
    MATERIALS CHARACTERIZATION, 2021, 179
  • [40] Effects of Zn Addition on the Natural Ageing Behavior and Bake Hardening Response of a Pre-Aged Al-Mg-Si-Cu Alloy
    Zhu Shang
    Li Zhihui
    Yan Lizhen
    Li Xiwu
    Zhang Yongan
    Xiong Buiqing
    ACTA METALLURGICA SINICA, 2019, 55 (11) : 1395 - 1406