Determination of Cu, Fe, Mn and Zn by flame atomic absorption spectrometry in multivitamin/multimineral dosage forms or tablets after an acidic extraction

This work presents the development of a methodology for the determination of Cu, Fe, Mn and Zn in samples of multivitamin/multimineral tablets, by flame atomic absorption spectrometry (FAAS), after extraction of the analytes with diluted hydrochloric acid solution. Several parameters that could influence the extraction process such as acid extraction solution concentration and nature, mixing mode (ultrasonic or magnetic stirring), extraction time and sample composition were evaluated. The obtained results showed that Fe, Mn and Zn were easily extracted with 1 mol/L HCl solution after 5 min of mixing with either ultrasonic or magnetic stirring for all studied samples. On the other hand, Cu extraction appeared to be more complex since it could only be extracted at the same conditions for silicate-free samples. For samples containing silicates the time of contact between solid sample and extraction solution presented remarkable influence, being necessary up to 12 h to achieve quantitative recovery with 1 mol/L HCl solution. The developed methodology was applied in the determination of Cu, Fe, Mn and Zn in seven commercially available multivitamin/multimineral tablets. The results obtained with the developed method were compared with those obtained after total digestion of samples using a closed-vessel microwave oven device. (c) 2006 Elsevier B.V. All rights reserved.