Nonlinear hull girder loads of a RoPax ship

被引:11
|
作者
Kukkanen, Timo [1 ]
Matusiak, Jerzy [2 ]
机构
[1] VTT Tech Res Ctr Finland, FI-02044 Espoo, Vtt, Finland
[2] Aalto Univ, Sch Engn, Dept Appl Mech, FI-00076 Espoo, Aalto, Finland
关键词
Seakeeping; Nonlinear panel method; Hull girder loads; Model tests; MOTIONS; VESSELS; SPEED; BODY;
D O I
10.1016/j.oceaneng.2013.10.008
中图分类号
U6 [水路运输]; P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
Numerical and experimental studies of nonlinear wave loads are presented. A nonlinear time domain method has been developed and the theoretical background of the method are provided. The method is based on the source formulation expressed by means of the transient three-dimensional Green function. The time derivative of the velocity potential in Bernoulli's equation is solved with a similar source formulation to that of the perturbation velocity potential. The Wigley hull form is used to validate the calculation method in regular head waves. Model tests of a roll-on roll-off passenger ship with a flat bottom stern have been carried out. Model test results of ship motions, vertical shear forces and bending moments in regular and irregular head waves and calm water are given. The nonlinearities in ship motions and hull girder loads are investigated using the calculation method and the model test results. The nonlinearities in the hull girder loads have been found to be significant and the calculation method can predict the nonlinear loads for the model test ship. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1 / 14
页数:14
相关论文
共 50 条
  • [31] Structural reliability of the ultimate hull girder strength of a PANAMAX container ship
    Peschmann, J.
    Schiff, C.
    Wolf, V.
    ANALYSIS AND DESIGN OF MARINE STRUCTURES, 2009, : 503 - 511
  • [32] Reliability-based research for failure risks of ship hull girder
    Liao Guohong Zeng Guangwu Yang Kailun School of Naval Architecture and Ocean Engineering Huazhong University of Science and Technology Wuhan China School of Transportation Wuhan University of Technology Wuhan China Taizhou Port and Shipping Administration Bureau Taizhou China
    Journal of Southeast University(English Edition), 2008, (English Edition) : 60 - 64
  • [33] On the presentation of ship's hull girder section modulus in probabilistic formats
    Ivanov, Lyuben D.
    Chen, Nian-Zhong
    SHIPS AND OFFSHORE STRUCTURES, 2017, 12 (08) : 1024 - 1036
  • [34] Assessment of the Level of Uncertainty of the Ship's Hull Girder Shear Stresses
    Ivanov, Lyuhen D.
    PROCEEDINGS OF THE EIGHTEENTH (2008) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, 2008, : 427 - 433
  • [36] Reliability-based assessment of ship hull girder ultimate strength
    Adiputra, Ristiyanto
    Yoshikawa, Takao
    Erwandi, Erwandi
    CURVED AND LAYERED STRUCTURES, 2023, 10 (01)
  • [37] The Assessment of the Ultimate Hull Girder Strength of RORO Ship after Damages
    Alie, Muhammad Zubair Muis
    Sitepu, Ganding
    Latumahin, Samuel Izaak
    4TH INTERNATIONAL SEMINAR ON OCEAN AND COASTAL ENGINEERING, ENVIRONMENTAL AND NATURAL DISASTER MANAGEMENT (ISOCEEN), 2018, 135
  • [38] Analysis of calculation method of hull girder residual strength for cruise ship
    Pu, Yingchao
    Shi, Guijie
    MARINE DESIGN XIII, VOLS 1 & 2, 2018, : 421 - 428
  • [39] A new approximate method to evaluate the ultimate strength of ship hull girder
    Tayyar, G. T.
    Bayraktarkatal, E.
    SUSTAINABLE MARITIME TRANSPORTATION AND EXPLOITATION OF SEA RESOURCES, VOL 1, 2012, : 323 - 329
  • [40] Latin hypercube sampling in ultimate strength reliability of ship hull girder
    Qi, En-Rong
    Cui, Wei-Cheng
    Chuan Bo Li Xue/Journal of Ship Mechanics, 2002, 6 (03): : 52 - 61