Kinetics of crust color changes during deep-fat frying of impregnated french fries

被引:93
|
作者
Moyano, PC [1 ]
Ríoseco, VK [1 ]
González, PA [1 ]
机构
[1] Univ Santiago Chile, Dept Chem Engn, Santiago, Chile
关键词
frying; potato; color; kinetics;
D O I
10.1016/S0260-8774(01)00211-4
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The objective of this work was to study the kinetics of crust browning during deep-fat frying of impregnated and control potato strips (Solanum tuberosum L., Desiree variety) by using a dynamic method and, with the obtained kinetics parameters, to predict the color change during frying. Blanched potato strips were impregnated at 25 degreesC by soaking in solutions of corn syrup DE 42-NaCl, 50-3% by weight, and NaCl 3% by weight. After rinsing and air drying, the strips were deep fried in sunflower oil at 160, 170 and 180 degreesC. A control treatment, consisting of potato strips blanched but not soaked was also conducted. Experimental data of surface temperature, mean moisture content of potato strips and crust color changes during frying were fit to empirical relationships, with correlation coefficients greater than 99.0%. A first-order rate equation was used to model the kinetics of color change. In all cases, the Arrhenius activation energy decreased alongside with decreasing mean moisture content, suggesting a possible color development rate control from a chemical step to a diffusional one. The kinetic parameters were employed to predict the color change during the deep-fat frying with RMS's values in the range of 5.1-10.5%. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:249 / 255
页数:7
相关论文
共 50 条
  • [31] Physico-chemical changes in tortilla chips during deep-fat frying
    Lee, JK
    [J]. FOOD SCIENCE AND BIOTECHNOLOGY, 2003, 12 (04) : 419 - 424
  • [32] CRITERION FOR OIL UPTAKE DURING DEEP-FAT FRYING
    PINTHUS, EJ
    WEINBERG, P
    SAGUY, IS
    [J]. JOURNAL OF FOOD SCIENCE, 1993, 58 (01) : 204 - &
  • [33] Comparison of the stability of palm olein and a palm olein/canola oil blend during deep-fat frying of chicken nuggets and French fries
    Departamento de Ingeniería Química, Alimentos y Ambiental, Universidad de las Américas Puebla, Santa Catarina Mártir, Cholula, Puebla72820, Mexico
    不详
    [J]. Int. J. Food Sci. Technol., 6 (1231-1237):
  • [34] Coupling between oxidation kinetics and anisothermal oil flow during deep-fat frying
    Touffet, Maxime
    Allouche, Mohamed Hatem
    Ariane, Mostapha
    Vitrac, Olivier
    [J]. PHYSICS OF FLUIDS, 2021, 33 (08)
  • [35] On the capacity of a crust-core model to describe potato deep-fat frying
    Lioumbas, John S.
    Kostoglou, Margaritis
    Karapantsios, Thodoris D.
    [J]. FOOD RESEARCH INTERNATIONAL, 2012, 46 (01) : 185 - 193
  • [36] Effect of Potato Orientation on Evaporation Front Propagation and Crust Thickness Evolution during Deep-Fat Frying
    Lioumbas, John S.
    Karapantsios, Thodoris D.
    [J]. JOURNAL OF FOOD SCIENCE, 2012, 77 (10) : E297 - E305
  • [37] Crust pore characteristics and their development during frying of French-fries
    Kalogianni, Eleni P.
    Papastergiadis, Efthimios
    [J]. JOURNAL OF FOOD ENGINEERING, 2014, 120 : 175 - 182
  • [38] Reducing of fat uptake in cassava product during deep-fat frying
    Castro Freitas, Daniela De Grandi
    Garcia Berbari, Shirley Aparecida
    Prati, Patricia
    Fakhouri, Farayde Matta
    Collares Queiroz, Fernanda Paula
    Vicente, Eduardo
    [J]. JOURNAL OF FOOD ENGINEERING, 2009, 94 (3-4) : 390 - 394
  • [39] A Comparative Study of the Characteristics of French Fries Produced by Deep Fat Frying and Air Frying
    del Rocio Teruel, Maria
    Gordon, Michael
    Belen Linares, Maria
    Dolores Garrido, Maria
    Ahromrit, Araya
    Niranjan, Keshavan
    [J]. JOURNAL OF FOOD SCIENCE, 2015, 80 (02) : E349 - E358
  • [40] Investigation of effective thermal conductivity kinetics of crust and core regions of potato during deep-fat frying using a modified Lees method
    Ziaiifar, Aman Mohammad
    Heyd, Bertrand
    Courtois, Francis
    [J]. JOURNAL OF FOOD ENGINEERING, 2009, 95 (03) : 373 - 378