Influence of the Casting Conditions on the Structure and Properties of a Co-Cr-Mo Dental Alloy

被引：0
|
作者：
Vitalariu, Anca [1 ]
Leata, Razvan [2 ]
Chelariu, Romeu [3 ]
Munteanu, Corneliu [3 ]
Cimpoesu, Ramona [3 ]
Ilie, Mariana [2 ]
Comaneci, Radu [3 ]
Moisei, Mihaela [2 ]
机构：
[1] Gr T Popa Univ Med & Pharm, Iasi 700115, Romania
[2] Dunarea de Jos Univ Galati, Fac Med & Pharm, Galati 800008, Romania
[3] Gheorghe Asachi Tech Univ Iasi, Iasi 700050, Romania
来源：
REVISTA DE CHIMIE | 2015年 / 66卷 / 12期
关键词：
Co-Cr-Mo dental alloy; casting; mold temperature; corrosion; artificial saliva; MECHANICAL-PROPERTIES; BEHAVIOR; BIOCOMPATIBILITY;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The paper aims to investigate the influence of the casting conditions and in particular of the mold temperature (T-mold) - as the main parameter of the solidification process - on structure, corrosion resistance and mechanical properties of a Co-Cr-Mo dental alloy. The alloy has been cast at T-mold = 500 and 900 degrees C and the solidification structure has been investigated by using optical and scanning electron microscopy (SEM). Corrosion of the as-cast alloy in two different artificial salivas having pH = 6.0 and 7.7, and mechanical testing revealed that casting Co-Cr-Mo dental alloy at lowest permissible temperature (500 degrees C) does not adversely affect the structure and properties of the alloy. Due to the highest melt solidification rate, an improvement in structure and corrosion resistance while maintaining the mechanical properties was found.
引用
收藏
页码：2147 / 2151
页数：5
相关论文
共 50 条
  • [41] Morphology of Co-Cr-Mo dental alloy surfaces polished by three different mechanical procedures
    Talu, Stefan
    Stach, Sebastian
    Klaic, Boris
    Misic, Tea
    Malina, Jadranka
    Celebic, Asja
    MICROSCOPY RESEARCH AND TECHNIQUE, 2015, 78 (09) : 831 - 839
  • [42] Machining of dental Alloys: Evaluating the surface finish of laterally milled Co-Cr-Mo Alloy
    Pasang, T.
    Lees, S.
    Takahashi, M.
    Fujita, T.
    Conor, P.
    Tanaka, K.
    Kamiya, O.
    MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017), 2017, 13 : 5 - 12
  • [43] Phase composition of cast dental Ni-Cr-Mo and Co-Cr-Mo alloys
    Braude, IS
    Gal'tsov, NN
    Prokhvatilov, AI
    Dotsenko, VI
    Chaika, EN
    PHYSICS OF METALS AND METALLOGRAPHY, 2005, 100 (02): : 165 - 171
  • [44] The advanced characterization of a new alloy by Co-Cr-Mo system
    Minciuna, M. G.
    Vizureanu, P.
    Achitei, D. C.
    Sandu, A. V.
    JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 2016, 18 (7-8): : 717 - 722
  • [45] The properties of a biomedical Co-Cr-Mo alloys.
    Matkovic, P
    Matkovic, T
    Malina, J
    METALURGIJA, 1998, 37 (01): : 15 - 19
  • [46] Modification of mechanical properties of sintered implant materials on the base of Co-Cr-Mo alloy
    Gradzka-Dahlke, M.
    Dabrowski, J. R.
    Dabrowski, B.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 204 (1-3) : 199 - 205
  • [47] A dispersion strengthened Co-Cr-Mo alloy for medical implants
    Wang, KK
    Berlin, RM
    Gustavson, LJ
    COBALT-BASE ALLOYS FOR BIOMEDICAL APPLICATIONS, 1999, 1365 : 89 - 97
  • [48] BIOACTIVE DOUBLE GLASS COATINGS FOR CO-CR-MO ALLOY
    ANDERSSON, OH
    KARLSSON, KH
    HERO, H
    VEDEL, E
    YLIURPO, A
    PAJAMAKI, KJJ
    LINDHOLM, TS
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 1995, 6 (04) : 242 - 247
  • [49] Passivation and mechanical property improvement of Co-Cr-Mo alloy
    Guo, Feifei
    Dong, Guangneng
    Dong, Guangneng, 1600, Science Press (34): : 1197 - 1201
  • [50] CUTTING CHARACTERISTICS OF CO-CR-MO ALLOY BIOCOMPATIBLE MATERIALS
    Hagino, Masahiro
    Su, Xin
    Inoue, Takashi
    PROGRESS OF MACHINING TECHNOLOGY, 2012, : 19 - 22
12345