Influence of the Casting Conditions on the Structure and Properties of a Co-Cr-Mo Dental Alloy

被引：0
|
作者：
Vitalariu, Anca [1 ]
Leata, Razvan [2 ]
Chelariu, Romeu [3 ]
Munteanu, Corneliu [3 ]
Cimpoesu, Ramona [3 ]
Ilie, Mariana [2 ]
Comaneci, Radu [3 ]
Moisei, Mihaela [2 ]
机构：
[1] Gr T Popa Univ Med & Pharm, Iasi 700115, Romania
[2] Dunarea de Jos Univ Galati, Fac Med & Pharm, Galati 800008, Romania
[3] Gheorghe Asachi Tech Univ Iasi, Iasi 700050, Romania
来源：
REVISTA DE CHIMIE | 2015年 / 66卷 / 12期
关键词：
Co-Cr-Mo dental alloy; casting; mold temperature; corrosion; artificial saliva; MECHANICAL-PROPERTIES; BEHAVIOR; BIOCOMPATIBILITY;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The paper aims to investigate the influence of the casting conditions and in particular of the mold temperature (T-mold) - as the main parameter of the solidification process - on structure, corrosion resistance and mechanical properties of a Co-Cr-Mo dental alloy. The alloy has been cast at T-mold = 500 and 900 degrees C and the solidification structure has been investigated by using optical and scanning electron microscopy (SEM). Corrosion of the as-cast alloy in two different artificial salivas having pH = 6.0 and 7.7, and mechanical testing revealed that casting Co-Cr-Mo dental alloy at lowest permissible temperature (500 degrees C) does not adversely affect the structure and properties of the alloy. Due to the highest melt solidification rate, an improvement in structure and corrosion resistance while maintaining the mechanical properties was found.
引用
收藏
页码：2147 / 2151
页数：5
相关论文
共 50 条
  • [21] Effect of nitrogen on the microstructure and mechanical properties of a Co-Cr-Mo alloy
    Centro De Investigacion y De, Estudios Avanzados del IPN-Unidad, Saltillo, Saltillo Coah, Mexico
    Mater Des, 2 (79-83):
  • [22] Effect of nitrogen on the microstructure and mechanical properties of a Co-Cr-Mo alloy
    Escobedo, J
    Mendez, J
    Cortes, D
    Gomez, J
    Mendez, M
    Mancha, H
    MATERIALS & DESIGN, 1996, 17 (02): : 79 - 83
  • [23] Application of Harmonic Structure Design to Biomedical Co-Cr-Mo Alloy for Improved Mechanical Properties
    Sawangrat, Choncharoen
    Yamaguchi, Osamu
    Vajpai, Sanjay Kumar
    Ameyama, Kei
    MATERIALS TRANSACTIONS, 2014, 55 (01) : 99 - 105
  • [24] Effects of Aloe Mucilage on Tribological Properties of Co-Cr-Mo Alloy
    1600, Chongqing Wujiu Periodicals Press (46):
  • [25] Microstructure and Tribological Properties of Weld Deposited Co-Cr-Mo Alloy
    Mantrala, Mallik Kedar
    Rao, Srinivasa Ch
    Rao, Kesava V. V. S.
    JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2015, 15 (02) : 239 - 241
  • [26] DUCTILITY IN CASTINGS OF CO-CR-MO DENTAL ALLOYS
    HERO, H
    SYVERUD, M
    JOURNAL OF DENTAL RESEARCH, 1983, 62 (04) : 491 - 491
  • [27] Change of a physicochemical state of a surface of a dental Co-Cr-Mo alloy after sandblasting
    Vasyliev, M. O.
    Senkevych, A. J.
    Filatova, V. S.
    Guryn, P. O.
    METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2006, 28 : 75 - 81
  • [28] Influence of thermal treatment duration on structure and phase composition of additive Co-Cr-Mo alloy samples
    Khimich, M. A.
    Ibragimov, E. A.
    Tolmachev, A., I
    Chebodaeva, V. V.
    Uvarkin, P., V
    Saprykina, N. A.
    Saprykin, A. A.
    Sharkeev, Yu P.
    LETTERS ON MATERIALS, 2022, 12 (01): : 43 - 48
  • [29] Development of a bioactive surface on a Co-Cr-Mo alloy during investment casting or heat treatment
    Ortiz-Cuellar, J. C.
    Cortes-Hernandez, D. A.
    Escobedo-Bocardo, J. C.
    Robles, J. M. Almanza
    BIOCERAMICS, VOL 20, PTS 1 AND 2, 2008, 361-363 : 653 - +
  • [30] SOLUTION TREATMENT BEHAVIOR OF CO-CR-MO ALLOY
    CLEMOW, AJT
    DANIELL, BL
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1979, 13 (02): : 265 - 279
12345