A new cooling method for vacuum brazing of a stainless steel plate-fin structure

被引：40
|
作者：
Jiang, Wenchun [1 ,2 ]
Gong, Jianming [1 ]
Tu, S. T. [1 ]
机构：
[1] Nanjing Univ Technol, Sch Mech & Power Engn, Nanjing 210009, Peoples R China
[2] China Univ Petr, Coll Mech & Elect Engn, Dongying 257061, Peoples R China
来源：
MATERIALS & DESIGN | 2010年 / 31卷 / 01期
基金：
中国国家自然科学基金;
关键词：
RESIDUAL-STRESS; INCONEL X-750; TEMPERATURE; DESIGN; JOINT;
D O I：
10.1016/j.matdes.2009.04.039
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents a new cooling method for vacuum brazing of 304 stainless steel plate-fin structures with Nickel-based BNi2 filler metal. The tensile tests and scanning electron microscope (SEM) observations have been performed. Quick cooling method and a new developed slow cooling method have been used, respectively, to discuss the influence of cooling methods on tensile strength and microstructures. The quick cooling is performed by dry nitrogen and wind cooling system directly from brazing temperature 1050 degrees C. The new slow cooling method is self-cooling in vacuum furnace from 1050 to 620 degrees C, then it is changed to quick cooling with dry nitrogen and wind cooling. The results show that quick cooling method should not be used because thermal cracks will be created and decrease the strength. The new developed slow cooling method can greatly improve the brazing performance. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：648 / 653
页数：6
相关论文
共 50 条
  • [41] Microstructure and mechanical property of electron beam brazing and vacuum brazing joints of stainless steel
    Li, Junmin
    Chen, Furong
    Liu, Jun
    Xie, Ruijun
    Hu, Gang
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 564 - +
  • [42] 3-D finite element analysis of residual stress and its creep relaxation at high temperature for stainless steel brazed plate-fin structure
    Jiang, Wenchun
    Gong, Jianming
    Chen, Hu
    Tu, Shandong
    Hanjie Xuebao/Transactions of the China Welding Institution, 2007, 28 (07): : 17 - 20
  • [43] Vacuum brazing of alumina to stainless steel using femtosecond laser patterned periodic surface structure
    Zhang, Y.
    Zou, G.
    Liu, L.
    Wu, A.
    Sun, Z.
    Zhou, Y. N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 662 : 178 - 184
  • [44] Optimization Design of A New Safety Structure of Plate-fin Heat Exchanger Using Genetic Algorithm
    Guo, Dongcai
    Liu, Meng
    APPLIED MATERIALS AND TECHNOLOGIES FOR MODERN MANUFACTURING, PTS 1-4, 2013, 423-426 : 1996 - 2000
  • [45] Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger
    Zhang, Bing
    Fan, Gang
    Yang, Jian
    Liu, Chuangui
    Tang, Shan
    CHEMICAL ENGINEERING & TECHNOLOGY, 2016, 39 (10) : 1813 - 1820
  • [46] Numerical Investigation of a Novel Plate-Fin Indirect Evaporative Cooling System Considering Condensation
    Zhou, Yuanyuan
    Yan, Zhen
    Gao, Ming
    Dai, Qiumin
    Yu, Yanshun
    PROCESSES, 2021, 9 (02) : 1 - 12
  • [47] Study on the heat transfer of the plate-fin heat sink under impinging jet cooling
    Lin, David T. W.
    Li, Hung-Yi
    Hu, Yuh-Chung
    PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, 2011, 11 (3-4): : 237 - 245
  • [48] Sensitivity and stress analysis of serrated fin structure in plate-fin heat exchanger on cryogenic condition
    Li, Ke
    Wen, Jian
    Yang, Huizhu
    Wang, Simin
    Li, Yanzhong
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, 145
  • [49] EXPERIMENTAL INVESTIGATION OF COPPER/STAINLESS STEEL JOINTS FORMED BY VACUUM BRAZING
    Ye, Changqing
    PROCEEDINGS OF THE 18TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING 2010, VOL 5, 2011, : 47 - +
  • [50] Vacuum brazing of stainless steel with silver binder containing nickel and tin
    Winiowski, Andrzej
    Rózan´ski, Maciej
    Welding International, 2014, 28 (12) : 947 - 952
12345