A new cooling method for vacuum brazing of a stainless steel plate-fin structure

被引：40
|
作者：
Jiang, Wenchun [1 ,2 ]
Gong, Jianming [1 ]
Tu, S. T. [1 ]
机构：
[1] Nanjing Univ Technol, Sch Mech & Power Engn, Nanjing 210009, Peoples R China
[2] China Univ Petr, Coll Mech & Elect Engn, Dongying 257061, Peoples R China
来源：
MATERIALS & DESIGN | 2010年 / 31卷 / 01期
基金：
中国国家自然科学基金;
关键词：
RESIDUAL-STRESS; INCONEL X-750; TEMPERATURE; DESIGN; JOINT;
D O I：
10.1016/j.matdes.2009.04.039
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents a new cooling method for vacuum brazing of 304 stainless steel plate-fin structures with Nickel-based BNi2 filler metal. The tensile tests and scanning electron microscope (SEM) observations have been performed. Quick cooling method and a new developed slow cooling method have been used, respectively, to discuss the influence of cooling methods on tensile strength and microstructures. The quick cooling is performed by dry nitrogen and wind cooling system directly from brazing temperature 1050 degrees C. The new slow cooling method is self-cooling in vacuum furnace from 1050 to 620 degrees C, then it is changed to quick cooling with dry nitrogen and wind cooling. The results show that quick cooling method should not be used because thermal cracks will be created and decrease the strength. The new developed slow cooling method can greatly improve the brazing performance. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：648 / 653
页数：6
相关论文
共 50 条
  • [21] Finite Element Analysis of the Effect of Brazed Residual Stress on Creep for Stainless Steel Plate-Fin Structure
    Jiang, Wen-Chun
    Gong, Jian-Ming
    Chen, Hu
    Tu, S. T.
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2008, 130 (04):
  • [22] A study of the effect of filler metal thickness on tensile strength for a stainless steel plate-fin structure by experiment and finite element method
    Jiang, Wenchun
    Gong, Jianming
    Tu, S. T.
    MATERIALS & DESIGN, 2010, 31 (05): : 2387 - 2396
  • [23] Finite element modelling of brazed residual stress and its influence factor analysis for stainless steel plate-fin structure
    Gong, Jianming
    Jiang, Wenchun
    Fan, Qinshan
    Chen, Hu
    Tu, S. T.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (04) : 1635 - 1643
  • [24] Effect of holding time on temperature field and residual stress in the vacuum brazing process of titanium alloy plate-fin heat exchangers
    Hanjie Xuebao/Transactions of the China Welding Institution, 2024, 45 (02): : 33 - 40
  • [25] VACUUM BRAZING OF STAINLESS STEEL DEPENDING ON THE SURFACE PREPARATION METHOD AND TEMPERATURE OF THE PROCESS
    Hebda, M.
    Kaczor, P.
    Miernik, K.
    ARCHIVES OF METALLURGY AND MATERIALS, 2019, 64 (01) : 5 - 11
  • [26] Brazing manufacturing technology of plate-fin heat exchanger for solid oxide fuel cells
    Wan, Yu
    Jiang, Wenchun
    Dong, Zhilong
    Xiao, Chengran
    Xie, Xuefang
    Song, Ming
    Zhang, Yucai
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2023, 48 (11) : 4456 - 4468
  • [27] Thermal performance of plate-fin heat sinks with piezoelectric cooling fan
    Li, Hung-Yi
    Chao, Shung-Ming
    Chen, Jing-Wei
    Yang, Jing-Tang
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 57 (02) : 722 - 732
  • [28] Measurement of performance of plate-fin heat sinks with cross flow cooling
    Li, Hung-Yi
    Chao, Shung-Ming
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (13-14) : 2949 - 2955
  • [29] Vacuum brazing of stainless steel joints with wide clearance
    Chen, Jianmin
    Shiyou Daxue Xuebao/Journal of the University of Petroleum China, 1999, 23 (06): : 53 - 56
  • [30] New plate-fin radiator core from Modine
    不详
    DIESEL PROGRESS NORTH AMERICAN EDITION, 1997, 63 (08): : 49 - 49
12345