A new cooling method for vacuum brazing of a stainless steel plate-fin structure

被引：40
|
作者：
Jiang, Wenchun [1 ,2 ]
Gong, Jianming [1 ]
Tu, S. T. [1 ]
机构：
[1] Nanjing Univ Technol, Sch Mech & Power Engn, Nanjing 210009, Peoples R China
[2] China Univ Petr, Coll Mech & Elect Engn, Dongying 257061, Peoples R China
来源：
MATERIALS & DESIGN | 2010年 / 31卷 / 01期
基金：
中国国家自然科学基金;
关键词：
RESIDUAL-STRESS; INCONEL X-750; TEMPERATURE; DESIGN; JOINT;
D O I：
10.1016/j.matdes.2009.04.039
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents a new cooling method for vacuum brazing of 304 stainless steel plate-fin structures with Nickel-based BNi2 filler metal. The tensile tests and scanning electron microscope (SEM) observations have been performed. Quick cooling method and a new developed slow cooling method have been used, respectively, to discuss the influence of cooling methods on tensile strength and microstructures. The quick cooling is performed by dry nitrogen and wind cooling system directly from brazing temperature 1050 degrees C. The new slow cooling method is self-cooling in vacuum furnace from 1050 to 620 degrees C, then it is changed to quick cooling with dry nitrogen and wind cooling. The results show that quick cooling method should not be used because thermal cracks will be created and decrease the strength. The new developed slow cooling method can greatly improve the brazing performance. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：648 / 653
页数：6
相关论文
共 50 条
  • [1] Effect of holding time on vacuum brazing for a stainless steel plate-fin structure
    Jiang, Wenchun
    Gong, J. M.
    Tu, S. T.
    MATERIALS & DESIGN, 2010, 31 (04) : 2157 - 2162
  • [2] Vacuum brazing of 304 stainless steel plate-fin structure and simulation of its tensile strength
    Gong J.
    Jiang W.
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2010, 30 (05): : 561 - 566
  • [3] Modelling of temperature field and residual stress of vacuum brazing for stainless steel plate-fin structure
    Jiang, Wenchun
    Gong, Jianming
    Tu, Shandong
    Chen, Hu
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (02) : 1105 - 1110
  • [4] Effect of brazing residual stress on creep for stainless steel plate-fin structure
    College of Mechanical and Power Engineering, Nanjing University of Technology, Nanjing 210009, China
    Hanjie Xuebao, 2007, 5 (5-8+12):
  • [5] Effect of brazing temperature on tensile strength and microstructure for a stainless steel plate-fin structure
    Jiang, Wenchun
    Gong, Jianming
    Tu, S. T.
    MATERIALS & DESIGN, 2011, 32 (02) : 736 - 742
  • [6] Finite element analysis of creep of stainless steel plate-fin structure
    Jiang Wenchun
    Gong Jianming
    Chen Hu
    Tu Shandong
    ACTA METALLURGICA SINICA, 2007, 43 (05) : 539 - 545
  • [7] Analysis of Thermal Stresses in 304 Stainless Steel Plate-fin Structure
    Cao Huaixiang
    Qiu Xingqi
    Jiang Wenchun
    RESEARCH EFFORTS IN MATERIAL SCIENCE AND MECHANICS ENGINEERING, 2013, 681 : 286 - 290
  • [8] Investigation on temperature field uniformity of vacuum brazing process for titanium alloy plate-fin structure
    Ma L.-F.
    Wang J.-F.
    Li Y.
    Liu Y.-H.
    Du C.-H.
    Zhan X.-H.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2023, 33 (12): : 4070 - 4079
  • [9] Numerical investigation of deformation and residual stress in vacuum brazing of titanium alloy plate-fin structure
    Ma, Longfei
    Li, Yue
    Wang, Jianfeng
    Liu, Zhan
    Zhan, Xiaohong
    VACUUM, 2024, 227
  • [10] Finite element creep analysis of brazed stainless steel plate-fin structure
    Jiang, Wenchun
    Gong, Jianming
    Chen, Hu
    MULTISCALING ASSOCIATED WITH STRUCTURAL AND MATERIAL INTEGRITY UNDER ELEVATED TEMPERATURE, 2006, : 27 - 33
12345