Back-face strain compliance relation for compact specimens for wide range in crack lengths

被引：26

作者：

Newman, J. C., Jr. ^{[1
]}

Yamada, Y. ^{[2
]}

James, M. A. ^{[3
]}

机构：

[1] Mississippi State Univ, Dept Aerosp Engn, Mississippi State, MS 39762 USA

[2] NASA, Ohio Aerosp Inst, Glenn Res Ctr, Cleveland, OH 44135 USA

[3] Alcoa Tech Ctr, Alcoa Ctr, PA 15069 USA

来源：

ENGINEERING FRACTURE MECHANICS | 2011年 / 78卷 / 15期

关键词：

Cracks; Compact; Back-face strain; Elasticity;

D O I：

10.1016/j.engfracmech.2011.07.001

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

A back-face strain (BFS) compliance relation has been developed for the standard compact C(T) specimen for a very wide range in crack-length-to-width (a/W) ratios. Both finite-element and boundary-element methods were used to develop the BFS relation for a/W ratios from 0.2 to 0.95. In addition, experimentally determined compliance values on four metallic materials compared well with the new relation over nearly the complete a/W range. The new relation can be used to monitor crack-length-against-cycles using computerized crack-monitoring systems that are currently used with the crack-mouth-opening-displacement (CMOD) gage method, and the relation has been cast in a standard form compatible with existing compliance crack length monitoring systems. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：2707 / 2711

页数：5

共 49 条

[41] Calculation of the crack tip parameters in the holed-cracked flattened Brazilian disk (HCFBD) specimens under wide range of mixed mode I/II loading
Akbardoost, J.
Ghadirian, H. R.
Sangsefidi, M.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2017, 40 (09) : 1416 - 1427
[42] Dynamic shear behavior of forged CrMnFeCoNi high entropy alloy using hat-shaped specimens over a wide range of temperatures and strain rates
Sun, Jie
Zhao, Wenxiang
Yan, Pei
Zhai, Bing
Xia, Xize
Zhao, Yunxiang
Jiao, Li
Wang, Xibin
INTERNATIONAL JOURNAL OF PLASTICITY, 2023, 170
[43] Wide range compliance of flattened three-point bend round bars based on slice synthesis method: Case (1) with straight-through crack, case (2) with chevron-notch crack
Wang, QZ
INTERNATIONAL JOURNAL OF FRACTURE, 1996, 81 (02) : R39 - R43
[44] M13 Bacteriophage-Assisted Morphological Engineering of Crack-Based Sensors for Highly Sensitive and Wide Linear Range Strain Sensing
Kim, Kang-Hyun
Thanh Mien Nguyen
Ha, Sung-Hun
Choi, Eun Jung
Kim, Yeji
Kim, Won-Geun
Oh, Jin-Woo
Kim, Jong-Man
ACS APPLIED MATERIALS & INTERFACES, 2020, 12 (40) : 45590 - 45601
[45] Patient-specific cranio-spinal compliance distribution using lumped-parameter model: its relation with ICP over a wide age range
Burman, Ritambhar
Alperin, Noam
Lee, Sang H.
Ertl-Wagner, Brigit
FLUIDS AND BARRIERS OF THE CNS, 2018, 15
[46] Patient-specific cranio-spinal compliance distribution using lumped-parameter model: its relation with ICP over a wide age range
Ritambhar Burman
Noam Alperin
Sang H. Lee
Brigit Ertl-Wagner
Fluids and Barriers of the CNS, 15
[47] An insight of the structure of stress fields for stationary crack in strength mismatch weld under plane strain mode-I loading - Part II: Compact tension and middle tension specimens
Khan, I. A.
Bhasin, V.
Chattopadhyay, J.
Singh, R. K.
Vaze, K. K.
Ghosh, A. K.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2014, 87 : 281 - 296
[48] Ductile fracture initiation with consideration of strain concentration and stress triaxiality near crack fronts in compact tension specimens of hydrided irradiated Zr-2.5Nb materials with split circumferential hydrides
Sung, Shin-Jang
Pan, Jwo
Lam, Poh-Sang
Scarth, Douglas A.
ENGINEERING FRACTURE MECHANICS, 2017, 186 : 208 - 241
[49] Constitutive analysis, twinning, recrystallization, and crack in fine-grained ZK61 Mg alloy during high strain rate compression over a wide range of temperatures
Malik, Abdul
Wang, Yangwei
Huanwu, Chang
Nazeer, Faisal
Ahmed, Bilal
Khan, Muhammad Abubaker
Wang Mingjun
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 771 (771):

← 1 2 3 4 5 →