Back-face strain compliance relation for compact specimens for wide range in crack lengths

被引：26
|
作者：
Newman, J. C., Jr. [1 ]
Yamada, Y. [2 ]
James, M. A. [3 ]
机构：
[1] Mississippi State Univ, Dept Aerosp Engn, Mississippi State, MS 39762 USA
[2] NASA, Ohio Aerosp Inst, Glenn Res Ctr, Cleveland, OH 44135 USA
[3] Alcoa Tech Ctr, Alcoa Ctr, PA 15069 USA
来源：
ENGINEERING FRACTURE MECHANICS | 2011年 / 78卷 / 15期
关键词：
Cracks; Compact; Back-face strain; Elasticity;
D O I：
10.1016/j.engfracmech.2011.07.001
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
A back-face strain (BFS) compliance relation has been developed for the standard compact C(T) specimen for a very wide range in crack-length-to-width (a/W) ratios. Both finite-element and boundary-element methods were used to develop the BFS relation for a/W ratios from 0.2 to 0.95. In addition, experimentally determined compliance values on four metallic materials compared well with the new relation over nearly the complete a/W range. The new relation can be used to monitor crack-length-against-cycles using computerized crack-monitoring systems that are currently used with the crack-mouth-opening-displacement (CMOD) gage method, and the relation has been cast in a standard form compatible with existing compliance crack length monitoring systems. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2707 / 2711
页数：5
相关论文
共 49 条
  • [21] Deformation behavior of thermoplastic elastomer specimens: Observation of the strain behavior in a wide range of tensile speeds
    Isogai, Yumiko
    Yokoyama, Atsushi
    Thi Thanh Binh Nguyen
    Sumiyama, Takuya
    Fruich, Kenji
    Nonomura, Chisato
    POLYMER ENGINEERING AND SCIENCE, 2018, 58 : E151 - E157
  • [22] SIMPLE AND SENSITIVE METHOD OF MONITORING CRACK AND LOAD IN COMPACT FRACTURE MECHANICS SPECIMENS USING STRAIN GAGES.
    Deans, W.F.
    Richards, C.E.
    Journal of Testing & Evaluation, 1979, 7 (03): : 147 - 154
  • [23] Crack Control in Biotemplated Gold Films for Wide-Range, Highly Sensitive Strain Sensing
    Shi, Jidong
    Lv, Suye
    Wang, Liu
    Dai, Zhaohe
    Yang, Siting
    Zhao, Lingyu
    Tian, Huihui
    Du, Mingde
    Li, Hongbian
    Fang, Ying
    ADVANCED MATERIALS INTERFACES, 2019, 6 (20):
  • [24] Crack growth monitoring in corrosion-fatigue tests using back face strain measurement technique
    Mehmanparast, Ali
    Albani, Pietro
    Igwemezie, Victor
    ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY, 2018, 13 : 261 - 266
  • [25] Perforation tests of composite structure specimens at wide range of temperatures and strain rates-experimental analysis
    Bendarma, A.
    Gourgue, H.
    Jankowiak, T.
    Rusinek, A.
    Kardellass, S.
    Klosak, M.
    MATERIALS TODAY-PROCEEDINGS, 2020, 24 : 7 - 10
  • [26] SIMPLE AND SENSITIVE METHOD OF MONITORING CRACK AND LOAD IN COMPACT FRACTURE-MECHANICS SPECIMENS USING STRAIN-GAUGES
    DEANS, WF
    RICHARDS, CE
    JOURNAL OF TESTING AND EVALUATION, 1979, 7 (03) : 147 - 154
  • [27] Compact and wide range polarimetric strain sensor based on polarization-maintaining photonic crystal fiber
    Noh, Tae Kyu
    Ryu, Uh-Chan
    Lee, Yong Wook
    SENSORS AND ACTUATORS A-PHYSICAL, 2014, 213 : 89 - 93
  • [28] Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading
    Ayatollahi, M. R.
    Aliha, M. R. M.
    COMPUTATIONAL MATERIALS SCIENCE, 2007, 38 (04) : 660 - 670
  • [29] ENERGY DENSITY APPROACH FOR CALCULATION OF 3-DIMENSIONAL INELASTIC STRAIN AND STRESS AT THE CRACK TIP IN COMPACT TENSION SPECIMENS OF POLYCARBONATE
    DHAR, S
    CLOUD, GL
    INTERNATIONAL JOURNAL OF FRACTURE, 1992, 53 (03) : 229 - 248
  • [30] Prediction of creep crack growth behavior in Cr-Mo-V steel specimens with different constraints for a wide range of C
    Zhang, J. W.
    Wang, G. Z.
    Xuan, F. Z.
    Tu, S. T.
    ENGINEERING FRACTURE MECHANICS, 2014, 132 : 70 - 84
12345