Stress assisted oxide cracking of Zr-2.5Nb pressure tube material

被引：0
|
作者：
Gopalan, Avinash [1 ]
Sunil, Saurav [1 ]
Murty, T. N. [1 ]
Bind, A. K. [1 ]
Kumawat, B. K. [1 ]
Chandanshive, S. A. [1 ]
Singh, R. N. [1 ]
机构：
[1] Bhabha Atom Res Ctr BARC, Mech Met Div MMD, Mumbai 400085, Maharashtra, India
来源：
JOURNAL OF NUCLEAR MATERIALS | 2020年 / 536卷 / 536期
关键词：
DELAYED HYDRIDE CRACKING; DYNAMIC EMBRITTLEMENT; FRACTURE-TOUGHNESS; ALLOY; OXIDATION; ZIRCONIUM; GROWTH; NB; BEHAVIOR; TIP;
D O I：
10.1016/j.jnucmat.2020.152187
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The crack growth rates of un-irradiated and un-hydrided Zr-2.5Nb pressure tube material has been investigated in both air and in vacuum. Pre-cracked CCT samples made from pressure tube were tested in air atmosphere at 300 °C and 350 °C at different stress intensity factors. It was observed that till a particular stress intensity factor there is no crack growth and after which the crack growth rate increases with increase in stress intensity factor. For the test carried out in vacuum, it was observed that the crack growth rates for air is an order of magnitude higher than that of the crack growth obtained in the vacuum ambience. © 2020 Elsevier B.V.
引用
收藏
页数：9
相关论文
共 50 条
  • [31] Anisotropy in impact behavior of Zr-2.5Nb pressure tube alloy
    Priti Kotak Shah
    P. M. Satheesh
    R. N. Singh
    J. S. Dubey
    R. S. Shriwastaw
    K. S. Balakrishnan
    A. P. Kulkarni
    Prerna Mishra
    V. P. Jathar
    S. Majumdar
    V. D. Alur
    S. Anantharaman
    J. K. Chakravartty
    Transactions of the Indian Institute of Metals, 2011, 64
  • [32] Anisotropy in impact behavior of Zr-2.5Nb pressure tube alloy
    Shah, Priti Kotak
    Satheesh, P. M.
    Singh, R. N.
    Dubey, J. S.
    Shriwastaw, R. S.
    Balakrishnan, K. S.
    Kulkarni, A. P.
    Mishra, Prerna
    Jathar, V. P.
    Majumdar, S.
    Alur, V. D.
    Anantharaman, S.
    Chakravartty, J. K.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2011, 64 (1-2) : 67 - 70
  • [33] MICROSTRUCTURAL AND MICROCHEMICAL STUDIES OF ZR-2.5NB PRESSURE TUBE ALLOY
    PEROVIC, V
    PEROVIC, A
    WEATHERLY, GC
    BROWN, LM
    PURDY, GR
    FLECK, RG
    HOLT, RA
    JOURNAL OF NUCLEAR MATERIALS, 1993, 205 : 251 - 257
  • [34] Size, geometry, and material effects in fracture toughness testing of irradiated Zr-2.5Nb pressure tube material
    Davies, PH
    Shewfelt, RSW
    ZIRCONIUM IN THE NUCLEAR INDUSTRY: TWELFTH INTERNATIONAL SYMPOSIUM, 2000, 1354 : 356 - 376
  • [35] Effect of direction of approach of test temperature on fracture toughness of Zr-2.5Nb pressure tube material
    Singh, R. N.
    Bind, A. K.
    Khandelwal, H. K.
    Rath, B. N.
    Sunil, S.
    Stahle, P.
    Chakravartty, J. K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 621 : 190 - 197
  • [36] Overload Fracture of Hydrided Region at Simulated Blunt Flaws in Zr-2.5Nb Pressure Tube Material
    Cui, Jun
    Shek, Gordon K.
    Wang, Zhirui
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2009, 131 (04):
  • [37] Load separation in 17 mm wide CT specimen of Zr-2.5Nb pressure tube material
    Bind, A. K.
    Sunil, S.
    Singh, R. N.
    Tiwari, Abhishek
    Chakravartty, J. K.
    21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 3752 - 3757
  • [38] Effect of radial hydride on room temperature fracture toughness of Zr-2.5Nb pressure tube material
    Gopalan, Avinash
    Bind, A. K.
    Sunil, Saurav
    Murty, T. N.
    Sharma, R. K.
    Samanta, Akanksha
    Soren, Amit
    Singh, R. N.
    JOURNAL OF NUCLEAR MATERIALS, 2021, 544
  • [39] Threshold stress intensity factor, KIH for delayed hydride cracking of a Zr-2.5Nb tube with loading mode
    Kim, Young Suk
    Park, Sun Sam
    Kwun, Sook In
    Journal of Alloys and Compounds, 2008, 462 (1-2): : 367 - 375
  • [40] Load separability and ηpl factor determination for CT specimen of Zr-2.5Nb pressure tube material
    Bind, A. K.
    Singh, R. N.
    ENGINEERING FRACTURE MECHANICS, 2020, 224
12345