Stress assisted oxide cracking of Zr-2.5Nb pressure tube material

被引：0
|
作者：
Gopalan, Avinash [1 ]
Sunil, Saurav [1 ]
Murty, T. N. [1 ]
Bind, A. K. [1 ]
Kumawat, B. K. [1 ]
Chandanshive, S. A. [1 ]
Singh, R. N. [1 ]
机构：
[1] Bhabha Atom Res Ctr BARC, Mech Met Div MMD, Mumbai 400085, Maharashtra, India
来源：
JOURNAL OF NUCLEAR MATERIALS | 2020年 / 536卷 / 536期
关键词：
DELAYED HYDRIDE CRACKING; DYNAMIC EMBRITTLEMENT; FRACTURE-TOUGHNESS; ALLOY; OXIDATION; ZIRCONIUM; GROWTH; NB; BEHAVIOR; TIP;
D O I：
10.1016/j.jnucmat.2020.152187
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The crack growth rates of un-irradiated and un-hydrided Zr-2.5Nb pressure tube material has been investigated in both air and in vacuum. Pre-cracked CCT samples made from pressure tube were tested in air atmosphere at 300 °C and 350 °C at different stress intensity factors. It was observed that till a particular stress intensity factor there is no crack growth and after which the crack growth rate increases with increase in stress intensity factor. For the test carried out in vacuum, it was observed that the crack growth rates for air is an order of magnitude higher than that of the crack growth obtained in the vacuum ambience. © 2020 Elsevier B.V.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] Delayed hydride cracking in Zr-2.5Nb pressure tube material
    Singh, RN
    Kumar, N
    Kishore, R
    Roychaudhury, S
    Sinha, TK
    Kashyap, BP
    JOURNAL OF NUCLEAR MATERIALS, 2002, 304 (2-3) : 189 - 203
  • [2] Anisotropy of yielding in a Zr-2.5Nb pressure tube material
    N. Christodoulou
    M. Resta Levi
    P. A. Turner
    E. T. C. Ho
    C. K. Chow
    Metallurgical and Materials Transactions A, 2000, 31 : 409 - 420
  • [3] Study on Microstructure of Zr-2.5Nb Pressure Tube Material
    Guo L.
    Han H.
    Bian W.
    Chu F.
    Qian J.
    Liang Z.
    1600, Atomic Energy Press (38): : 89 - 93
  • [4] Anisotropy of yielding in a Zr-2.5Nb pressure tube material
    Christodoulou, N
    Turner, PA
    Ho, ETC
    Chow, CK
    Levi, MR
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (02): : 409 - 420
  • [5] Delayed hydride cracking in Zr-2.5Nb pressure tube material: influence of fabrication routes
    Singh, RN
    Roychowdhury, S
    Sinha, VP
    Sinha, TK
    De, PK
    Banerjee, S
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 374 (1-2): : 342 - 350
  • [6] Deformation behavior of irradiated Zr-2.5Nb pressure tube material
    Himbeault, D.D.
    Chow, C.K.
    Puls, M.P.
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1994, 25 A (01): : 135 - 142
  • [7] Effect of radial hydride on delayed hydride cracking behaviour of Zr-2.5Nb pressure tube material
    Sunil, Saurav
    Gopalan, Avinash
    Bind, A. K.
    Sharma, R. K.
    Murty, T. N.
    Singh, R. N.
    JOURNAL OF NUCLEAR MATERIALS, 2020, 542
  • [8] Effect of Hydrogen Isotopes on Delayed Hydride Cracking Behavior of Zr-2.5Nb Pressure Tube Material
    Bind, A. K.
    Sunil, Saurav
    Singh, R. N.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2022, 75 (11) : 2767 - 2775
  • [9] Effect of radial hydride on delayed hydride cracking behaviour of Zr-2.5Nb pressure tube material
    Sunil, Saurav
    Gopalan, Avinash
    Bind, A.K.
    Sharma, R.K.
    Murty, T.N.
    Singh, R.N.
    Journal of Nuclear Materials, 2021, 542
  • [10] The effect of annealing on hardness, microstructure and delayed hydride cracking in Zr-2.5Nb pressure tube material
    Jovanovic, MT
    Eadie, RL
    Ma, Y
    Anderson, M
    Sagat, S
    Perovic, V
    MATERIALS CHARACTERIZATION, 2001, 47 (3-4) : 259 - 268
12345